On Wed, 06 Nov 2024 13:33:03 +0100, Heiko Stuebner wrote: > From: Heiko Stuebner <heiko.stuebner@xxxxxxxxx> > > The Display Serial Interface 2 (DSI-2) is part of a group of communication > protocols defined by the MIPI Alliance. The RK3588 implements this > specification in its two MIPI DSI-2 Host Controllers that are based on a > new Synopsis IP. > > Signed-off-by: Heiko Stuebner <heiko.stuebner@xxxxxxxxx> > --- > .../rockchip/rockchip,rk3588-mipi-dsi2.yaml | 119 ++++++++++++++++++ > 1 file changed, 119 insertions(+) > create mode 100644 Documentation/devicetree/bindings/display/rockchip/rockchip,rk3588-mipi-dsi2.yaml > My bot found errors running 'make dt_binding_check' on your patch: yamllint warnings/errors: dtschema/dtc warnings/errors: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/display/rockchip/rockchip,rk3588-mipi-dsi2.yaml: $id: Cannot determine base path from $id, relative path/filename doesn't match actual path or filename $id: http://devicetree.org/schemas/display/rockchip/rockchip,dw-mipi-dsi2.yaml file: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/display/rockchip/rockchip,rk3588-mipi-dsi2.yaml doc reference errors (make refcheckdocs): See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20241106123304.422854-3-heiko@xxxxxxxxx The base for the series is generally the latest rc1. A different dependency should be noted in *this* patch. If you already ran 'make dt_binding_check' and didn't see the above error(s), then make sure 'yamllint' is installed and dt-schema is up to date: pip3 install dtschema --upgrade Please check and re-submit after running the above command yourself. Note that DT_SCHEMA_FILES can be set to your schema file to speed up checking your schema. However, it must be unset to test all examples with your schema.
