On Tue, 29 Oct 2024 17:54:10 +0800, Chen-Yu Tsai wrote:
> The IT6505 bridge chip has a active low reset line. Since it is a
> "reset" and not an "enable" line, the GPIO should be asserted to
> put it in reset and deasserted to bring it out of reset during
> the power on sequence.
>
> The polarity was inverted when the driver was first introduced, likely
> because the device family that was targeted had an inverting level
> shifter on the reset line.
>
> [...]
Applied, thanks!
[1/1] drm/bridge: it6505: Fix inverted reset polarity
commit: c5f3f21728b069412e8072b8b1d0a3d9d3ab0265
Best regards,
--
Chen-Yu Tsai <wenst@xxxxxxxxxxxx>
