From: Hermes Wu <Hermes.wu@xxxxxxxxxx>
When starting HDCP authentication, HDCP encryption should be enabled
when R0'is checked.
Change encryption enables time at R0' ready.
The hardware HDCP engine trigger is changed and the repeater KSV fails
will restart HDCP.
Signed-off-by: Hermes Wu <hermes.wu@xxxxxxxxxx>
---
drivers/gpu/drm/bridge/ite-it6505.c | 17 +++++++++--------
1 file changed, 9 insertions(+), 8 deletions(-)
diff --git a/drivers/gpu/drm/bridge/ite-it6505.c b/drivers/gpu/drm/bridge/ite-it6505.c
index 760eab0b868874f96ccd4d5ec3e2f2d4ffb1e41c..614fbb6295237708aa5b692de87ab5548c499da5 100644
--- a/drivers/gpu/drm/bridge/ite-it6505.c
+++ b/drivers/gpu/drm/bridge/ite-it6505.c
@@ -2092,15 +2092,12 @@ static void it6505_hdcp_wait_ksv_list(struct work_struct *work)
ksv_list_check = it6505_hdcp_part2_ksvlist_check(it6505);
DRM_DEV_DEBUG_DRIVER(dev, "ksv list ready, ksv list check %s",
ksv_list_check ? "pass" : "fail");
- if (ksv_list_check) {
- it6505_set_bits(it6505, REG_HDCP_TRIGGER,
- HDCP_TRIGGER_KSV_DONE, HDCP_TRIGGER_KSV_DONE);
+
+ if (ksv_list_check)
return;
- }
+
timeout:
- it6505_set_bits(it6505, REG_HDCP_TRIGGER,
- HDCP_TRIGGER_KSV_DONE | HDCP_TRIGGER_KSV_FAIL,
- HDCP_TRIGGER_KSV_DONE | HDCP_TRIGGER_KSV_FAIL);
+ it6505_start_hdcp(it6505);
}
static void it6505_hdcp_work(struct work_struct *work)
@@ -2473,7 +2470,11 @@ static void it6505_irq_hdcp_ksv_check(struct it6505 *it6505)
{
struct device *dev = it6505->dev;
- DRM_DEV_DEBUG_DRIVER(dev, "HDCP event Interrupt");
+ DRM_DEV_DEBUG_DRIVER(dev, "HDCP repeater R0 event Interrupt");
+ /* 1B01 HDCP encription should start when R0 is ready*/
+ it6505_set_bits(it6505, REG_HDCP_TRIGGER,
+ HDCP_TRIGGER_KSV_DONE, HDCP_TRIGGER_KSV_DONE);
+
schedule_work(&it6505->hdcp_wait_ksv_list);
}
--
2.34.1
