Hi again On Monday, October 28th, 2024 at 5:40 PM, Piotr Zalewski <pZ010001011111@xxxxxxxxx> wrote: > On Monday, October 28th, 2024 at 7:42 AM, Andy Yan andyshrk@xxxxxxx wrote: > > > Hi Piotr， > > > Hi Andy > > > Tested on top of Linux 6.12-rc5 with rk3566-box-demo in a buildroot + weston environment: > > weston --backend=drm-backend.so -i 0 --continue-without-input > > weston-simple-egl > > > Thank you for testing it! > > > simple-egl will draw a triangle on the desktop. > > After the patch applied，the triangle will flicker again and agian。 > > So it break some function。 > > > Did you have gamma on? The screen flickered for me when I ran something > writing gamma LUT frequently because of disable step I reckon. > > > I've been quite busy lately, and it will take some time before I can analyze what the specific reason is. > > > Np, I will try to reproduce this behavior with weston on Pinetab2 in the > meantime. > So I got weston (version 13) and ran it as you did, then ran the same client. Nothing flickered. Since weston doesn't support gamma control, I ran sway in the other tty and set color temperature there with `gammastep -O 3000`. Then switched again to weston and color temp. wasn't retained, triangle didn't flicker. Then I ran weston-simple-egl under sway (while having `gammastep` running and doing gamma lut adjustments every ~5 seconds) and the triangle didn't flicker too (but there were _expected_ flickers every ~5 seconds because of gamma adjustments by gammastep). Best Regards, Piotr Zalewski
