The patch does not re-execute the hardware initialization/activation procedure for the panel if it is already operational. This feature is crucial when supporting the simple framebuffer, as the controller has already been initialized by the bootloader. Co-developed-by: Michael Trimarchi <michael@xxxxxxxxxxxxxxxxxxxx> Signed-off-by: Michael Trimarchi <michael@xxxxxxxxxxxxxxxxxxxx> Signed-off-by: Dario Binacchi <dario.binacchi@xxxxxxxxxxxxxxxxxxxx> --- drivers/gpu/drm/panel/panel-synaptics-r63353.c | 10 +++++++++- 1 file changed, 9 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/panel/panel-synaptics-r63353.c b/drivers/gpu/drm/panel/panel-synaptics-r63353.c index 169c629746c7..93e3ed545b34 100644 --- a/drivers/gpu/drm/panel/panel-synaptics-r63353.c +++ b/drivers/gpu/drm/panel/panel-synaptics-r63353.c @@ -258,6 +258,8 @@ static int r63353_panel_probe(struct mipi_dsi_device *dsi) int ret = 0; struct device *dev = &dsi->dev; struct r63353_panel *panel; + bool initialized; + enum gpiod_flags rflags; panel = devm_kzalloc(&dsi->dev, sizeof(*panel), GFP_KERNEL); if (!panel) @@ -282,7 +284,9 @@ static int r63353_panel_probe(struct mipi_dsi_device *dsi) if (IS_ERR(panel->avdd)) return PTR_ERR(panel->avdd); - panel->reset_gpio = devm_gpiod_get(dev, "reset", GPIOD_OUT_LOW); + initialized = of_property_read_bool(dev->of_node, "syna,boot-on"); + rflags = initialized ? GPIOD_ASIS : GPIOD_OUT_LOW; + panel->reset_gpio = devm_gpiod_get(dev, "reset", rflags); if (IS_ERR(panel->reset_gpio)) { dev_err(dev, "failed to get RESET GPIO\n"); return PTR_ERR(panel->reset_gpio); @@ -297,6 +301,10 @@ static int r63353_panel_probe(struct mipi_dsi_device *dsi) return ret; drm_panel_add(&panel->base); + if (initialized) { + r63353_panel_power_on(panel); + panel->base.prepared = true; + } ret = mipi_dsi_attach(dsi); if (ret < 0) { -- 2.43.0