GSI hardware generates an interrupt for each transfer completion.
For multiple messages within a single transfer, this results
in receiving N interrupts for N messages, which can introduce
significant software interrupt latency. To mitigate this latency,
utilize Block Event Interrupt (BEI) only when an interrupt is necessary.
When using BEI, consider splitting a single multi-message transfer into
chunks of 8. This approach can enhance overall transfer time and
efficiency.
Signed-off-by: Jyothi Kumar Seerapu <quic_jseerapu@xxxxxxxxxxx>
---
v1 -> v2:
- Changed dma_addr type from array of pointers to array.
- To support BEI functionality with the TRE size of 64 defined in GPI driver,
updated QCOM_GPI_MAX_NUM_MSGS to 16 and NUM_MSGS_PER_IRQ to 4.
drivers/dma/qcom/gpi.c | 49 ++++++++++++++++++++++++++++++++
include/linux/dma/qcom-gpi-dma.h | 37 ++++++++++++++++++++++++
2 files changed, 86 insertions(+)
diff --git a/drivers/dma/qcom/gpi.c b/drivers/dma/qcom/gpi.c
index 52a7c8f2498f..a98de3178764 100644
--- a/drivers/dma/qcom/gpi.c
+++ b/drivers/dma/qcom/gpi.c
@@ -1693,6 +1693,9 @@ static int gpi_create_i2c_tre(struct gchan *chan, struct gpi_desc *desc,
tre->dword[3] = u32_encode_bits(TRE_TYPE_DMA, TRE_FLAGS_TYPE);
tre->dword[3] |= u32_encode_bits(1, TRE_FLAGS_IEOT);
+
+ if (i2c->flags & QCOM_GPI_BLOCK_EVENT_IRQ)
+ tre->dword[3] |= u32_encode_bits(1, TRE_FLAGS_BEI);
}
for (i = 0; i < tre_idx; i++)
@@ -2098,6 +2101,52 @@ static int gpi_find_avail_gpii(struct gpi_dev *gpi_dev, u32 seid)
return -EIO;
}
+/**
+ * gpi_multi_desc_process() - Process received transfers from GSI HW
+ * @dev: pointer to the corresponding dev node
+ * @multi_xfer: pointer to the gpi_multi_xfer
+ * @num_xfers: total number of transfers
+ * @transfer_timeout_msecs: transfer timeout value
+ * @transfer_comp: completion object of the transfer
+ *
+ * This function is used to process the received transfers based on the
+ * completion events
+ *
+ * Return: On success returns 0, otherwise return error code
+ */
+int gpi_multi_desc_process(struct device *dev, struct gpi_multi_xfer *multi_xfer,
+ u32 num_xfers, u32 transfer_timeout_msecs,
+ struct completion *transfer_comp)
+{
+ int i;
+ u32 max_irq_cnt, time_left;
+
+ max_irq_cnt = num_xfers / NUM_MSGS_PER_IRQ;
+ if (num_xfers % NUM_MSGS_PER_IRQ)
+ max_irq_cnt++;
+
+ /*
+ * Wait for the interrupts of the processed transfers in multiple
+ * of 64 and for the last transfer. If the hardware is fast and
+ * already processed all the transfers then no need to wait.
+ */
+ for (i = 0; i < max_irq_cnt; i++) {
+ reinit_completion(transfer_comp);
+ if (max_irq_cnt != multi_xfer->irq_cnt) {
+ time_left = wait_for_completion_timeout(transfer_comp,
+ transfer_timeout_msecs);
+ if (!time_left) {
+ dev_err(dev, "%s: Transfer timeout\n", __func__);
+ return -ETIMEDOUT;
+ }
+ }
+ if (num_xfers > multi_xfer->msg_idx_cnt)
+ return 0;
+ }
+ return 0;
+}
+EXPORT_SYMBOL_GPL(gpi_multi_desc_process);
+
/* gpi_of_dma_xlate: open client requested channel */
static struct dma_chan *gpi_of_dma_xlate(struct of_phandle_args *args,
struct of_dma *of_dma)
diff --git a/include/linux/dma/qcom-gpi-dma.h b/include/linux/dma/qcom-gpi-dma.h
index 6680dd1a43c6..1341ff0db808 100644
--- a/include/linux/dma/qcom-gpi-dma.h
+++ b/include/linux/dma/qcom-gpi-dma.h
@@ -15,6 +15,12 @@ enum spi_transfer_cmd {
SPI_DUPLEX,
};
+#define QCOM_GPI_BLOCK_EVENT_IRQ BIT(0)
+
+#define QCOM_GPI_MAX_NUM_MSGS 16
+#define NUM_MSGS_PER_IRQ 8
+#define MIN_NUM_OF_MSGS_MULTI_DESC 4
+
/**
* struct gpi_spi_config - spi config for peripheral
*
@@ -51,6 +57,29 @@ enum i2c_op {
I2C_READ,
};
+/**
+ * struct gpi_multi_xfer - Used for multi transfer support
+ *
+ * @msg_idx_cnt: message index for the transfer
+ * @buf_idx: dma buffer index
+ * @unmap_msg_cnt: unampped transfer index
+ * @freed_msg_cnt: freed transfer index
+ * @irq_cnt: received interrupt count
+ * @irq_msg_cnt: transfer message count for the received irqs
+ * @dma_buf: virtual address of the buffer
+ * @dma_addr: dma address of the buffer
+ */
+struct gpi_multi_xfer {
+ u32 msg_idx_cnt;
+ u32 buf_idx;
+ u32 unmap_msg_cnt;
+ u32 freed_msg_cnt;
+ u32 irq_cnt;
+ u32 irq_msg_cnt;
+ void *dma_buf[QCOM_GPI_MAX_NUM_MSGS];
+ dma_addr_t dma_addr[QCOM_GPI_MAX_NUM_MSGS];
+};
+
/**
* struct gpi_i2c_config - i2c config for peripheral
*
@@ -65,6 +94,8 @@ enum i2c_op {
* @rx_len: receive length for buffer
* @op: i2c cmd
* @muli-msg: is part of multi i2c r-w msgs
+ * @flags: true for block event interrupt support
+ * @multi_xfer: indicates transfer has multi messages
*/
struct gpi_i2c_config {
u8 set_config;
@@ -78,6 +109,12 @@ struct gpi_i2c_config {
u32 rx_len;
enum i2c_op op;
bool multi_msg;
+ u8 flags;
+ struct gpi_multi_xfer multi_xfer;
};
+int gpi_multi_desc_process(struct device *dev, struct gpi_multi_xfer *multi_xfer,
+ u32 num_xfers, u32 tranfer_timeout_msecs,
+ struct completion *transfer_comp);
+
#endif /* QCOM_GPI_DMA_H */
--
2.17.1
