The fb_udl driver currently depends on CONFIG_FB_DEVICE to create sysfs entries and access framebuffer device information. This patch wraps the relevant code blocks with #ifdef CONFIG_FB_DEVICE, allowing the driver to be built and used even if CONFIG_FB_DEVICE is not selected. The sysfs setting only controls access to certain framebuffer attributes and is not required for the basic display functionality to work correctly. (For information on DisplayLink devices and their Linux support, see: https://wiki.archlinux.org/title/DisplayLink). Tested by building with and without CONFIG_FB_DEVICE, both of which compiled and ran without issues. Signed-off-by: Gonzalo Silvalde Blanco <gonzalo.silvalde@xxxxxxxxx> --- drivers/video/fbdev/Kconfig | 1 - drivers/video/fbdev/udlfb.c | 41 ++++++++++++++++++++++--------------- 2 files changed, 24 insertions(+), 18 deletions(-) diff --git a/drivers/video/fbdev/Kconfig b/drivers/video/fbdev/Kconfig index ea36c6956bf3..9bf6cf74b9cb 100644 --- a/drivers/video/fbdev/Kconfig +++ b/drivers/video/fbdev/Kconfig @@ -1588,7 +1588,6 @@ config FB_SMSCUFX config FB_UDL tristate "Displaylink USB Framebuffer support" depends on FB && USB - depends on FB_DEVICE select FB_MODE_HELPERS select FB_SYSMEM_HELPERS_DEFERRED help diff --git a/drivers/video/fbdev/udlfb.c b/drivers/video/fbdev/udlfb.c index 71ac9e36f67c..de4800f09dc7 100644 --- a/drivers/video/fbdev/udlfb.c +++ b/drivers/video/fbdev/udlfb.c @@ -341,10 +341,10 @@ static int dlfb_ops_mmap(struct fb_info *info, struct vm_area_struct *vma) return -EINVAL; pos = (unsigned long)info->fix.smem_start + offset; - +#ifdef CONFIG_FB_DEVICE dev_dbg(info->dev, "mmap() framebuffer addr:%lu size:%lu\n", pos, size); - +#endif while (size > 0) { page = vmalloc_to_pfn((void *)pos); if (remap_pfn_range(vma, start, page, PAGE_SIZE, PAGE_SHARED)) @@ -929,10 +929,10 @@ static int dlfb_ops_open(struct fb_info *info, int user) info->fbdefio = fbdefio; fb_deferred_io_init(info); } - +#ifdef CONFIG_FB_DEVICE dev_dbg(info->dev, "open, user=%d fb_info=%p count=%d\n", user, info, dlfb->fb_count); - +#endif return 0; } @@ -982,9 +982,9 @@ static int dlfb_ops_release(struct fb_info *info, int user) kfree(info->fbdefio); info->fbdefio = NULL; } - +#ifdef CONFIG_FB_DEVICE dev_dbg(info->dev, "release, user=%d count=%d\n", user, dlfb->fb_count); - +#endif return 0; } @@ -1095,10 +1095,10 @@ static int dlfb_ops_blank(int blank_mode, struct fb_info *info) struct dlfb_data *dlfb = info->par; char *bufptr; struct urb *urb; - +#ifdef CONFIG_FB_DEVICE dev_dbg(info->dev, "blank, mode %d --> %d\n", dlfb->blank_mode, blank_mode); - +#endif if ((dlfb->blank_mode == FB_BLANK_POWERDOWN) && (blank_mode != FB_BLANK_POWERDOWN)) { @@ -1190,7 +1190,9 @@ static int dlfb_realloc_framebuffer(struct dlfb_data *dlfb, struct fb_info *info */ new_fb = vmalloc(new_len); if (!new_fb) { +#ifdef CONFIG_FB_DEVICE dev_err(info->dev, "Virtual framebuffer alloc failed\n"); +#endif return -ENOMEM; } memset(new_fb, 0xff, new_len); @@ -1213,9 +1215,11 @@ static int dlfb_realloc_framebuffer(struct dlfb_data *dlfb, struct fb_info *info */ if (shadow) new_back = vzalloc(new_len); +#ifdef CONFIG_FB_DEVICE if (!new_back) dev_info(info->dev, "No shadow/backing buffer allocated\n"); +#endif else { dlfb_deferred_vfree(dlfb, dlfb->backing_buffer); dlfb->backing_buffer = new_back; @@ -1247,14 +1251,14 @@ static int dlfb_setup_modes(struct dlfb_data *dlfb, struct device *dev = info->device; struct fb_videomode *mode; const struct fb_videomode *default_vmode = NULL; - +#ifdef CONFIG_FB_DEVICE if (info->dev) { /* only use mutex if info has been registered */ mutex_lock(&info->lock); /* parent device is used otherwise */ dev = info->dev; } - +#endif edid = kmalloc(EDID_LENGTH, GFP_KERNEL); if (!edid) { result = -ENOMEM; @@ -1375,10 +1379,10 @@ static int dlfb_setup_modes(struct dlfb_data *dlfb, error: if (edid && (dlfb->edid != edid)) kfree(edid); - +#ifdef CONFIG_FB_DEVICE if (info->dev) mutex_unlock(&info->lock); - +#endif return result; } @@ -1597,8 +1601,10 @@ static int dlfb_parse_vendor_descriptor(struct dlfb_data *dlfb, static int dlfb_usb_probe(struct usb_interface *intf, const struct usb_device_id *id) { +#ifdef CONFIG_FB_DEVICE int i; const struct device_attribute *attr; +#endif struct dlfb_data *dlfb; struct fb_info *info; int retval; @@ -1701,7 +1707,7 @@ static int dlfb_usb_probe(struct usb_interface *intf, retval); goto error; } - +#ifdef CONFIG_FB_DEVICE for (i = 0; i < ARRAY_SIZE(fb_device_attrs); i++) { attr = &fb_device_attrs[i]; retval = device_create_file(info->dev, attr); @@ -1710,17 +1716,16 @@ static int dlfb_usb_probe(struct usb_interface *intf, "failed to create '%s' attribute: %d\n", attr->attr.name, retval); } - retval = device_create_bin_file(info->dev, &edid_attr); if (retval) dev_warn(info->device, "failed to create '%s' attribute: %d\n", edid_attr.attr.name, retval); - dev_info(info->device, "%s is DisplayLink USB device (%dx%d, %dK framebuffer memory)\n", dev_name(info->dev), info->var.xres, info->var.yres, ((dlfb->backing_buffer) ? info->fix.smem_len * 2 : info->fix.smem_len) >> 10); +#endif return 0; error: @@ -1737,8 +1742,9 @@ static void dlfb_usb_disconnect(struct usb_interface *intf) { struct dlfb_data *dlfb; struct fb_info *info; +#ifdef CONFIG_FB_DEVICE int i; - +#endif dlfb = usb_get_intfdata(intf); info = dlfb->info; @@ -1754,10 +1760,11 @@ static void dlfb_usb_disconnect(struct usb_interface *intf) dlfb_free_urb_list(dlfb); /* remove udlfb's sysfs interfaces */ +#ifdef CONFIG_FB_DEVICE for (i = 0; i < ARRAY_SIZE(fb_device_attrs); i++) device_remove_file(info->dev, &fb_device_attrs[i]); device_remove_bin_file(info->dev, &edid_attr); - +#endif unregister_framebuffer(info); } -- 2.39.5