The LXD M9189A is a 1024x600 MIPI-DSI panel. Signed-off-by: Rouven Czerwinski <r.czerwinski@xxxxxxxxxxxxxx> --- .../bindings/display/panel/lxd,m9189a.yaml | 64 +++++++++++++++++++ 1 file changed, 64 insertions(+) create mode 100644 Documentation/devicetree/bindings/display/panel/lxd,m9189a.yaml diff --git a/Documentation/devicetree/bindings/display/panel/lxd,m9189a.yaml b/Documentation/devicetree/bindings/display/panel/lxd,m9189a.yaml new file mode 100644 index 0000000000000..49cee8865cae1 --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/lxd,m9189a.yaml @@ -0,0 +1,64 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/panel/lxd,m9189a.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: LXD M9189 DSI Display Panel + +maintainers: + - Rouven Czerwinski <r.czerwinski@xxxxxxxxxxxxxx> + +properties: + compatible: + const: ronbo,rb070d30 + + reg: + maxItems: 1 + + standby-gpios: + description: GPIO used for the standby pin + maxItems: 1 + + reset-gpios: + description: GPIO used for the reset pin + maxItems: 1 + + vdd-supply: + description: Power regulator + + backlight: + description: Backlight used by the panel + $ref: /schemas/types.yaml#/definitions/phandle + +required: + - compatible + - reg + - standby-gpios + - reset-gpios + - vdd-supply + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + dsi { + #address-cells = <1>; + #size-cells = <0>; + + panel@0 { + compatible = "lxd,m9189a"; + reg = <0>; + backlight = <&backlight>; + reset-gpios = <&gpio3 25 GPIO_ACTIVE_LOW>; + standby-gpios = <&gpio5 22 GPIO_ACTIVE_LOW>; + + port { + mipi_panel_in: endpoint { + remote-endpoint = <&mipi_dsi_out>; + }; + }; + }; + }; -- 2.39.5
