On 18/10/2024 23:49, Dmitry Baryshkov wrote:
Allow YCbCr 420 output for HDMI and DisplayPort connectors. Other
bridges in the chain still might limit YCbCr 420 support on the
corresponding connector.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
---
drivers/gpu/drm/bridge/display-connector.c | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/drivers/gpu/drm/bridge/display-connector.c b/drivers/gpu/drm/bridge/display-connector.c
index ab8e00baf3f1..aab9ce7be94c 100644
--- a/drivers/gpu/drm/bridge/display-connector.c
+++ b/drivers/gpu/drm/bridge/display-connector.c
@@ -270,6 +270,10 @@ static int display_connector_probe(struct platform_device *pdev)
/* All the supported connector types support interlaced modes. */
conn->bridge.interlace_allowed = true;
+ if (type == DRM_MODE_CONNECTOR_HDMIA ||
+ type == DRM_MODE_CONNECTOR_DisplayPort)
+ conn->bridge.ycbcr_420_allowed = true;
+
/* Get the optional connector label. */
of_property_read_string(pdev->dev.of_node, "label", &label);
I think we should make sure all HDMI bridges can filter out 420 before
landing this, no ?
Neil
