From: Hermes Wu <Hermes.wu@xxxxxxxxxx>
HDCP KSV list readback can choose to use AUX FIFO or
general data register.
For some DisplayPort devices, the KSV list must be read
in 5 byte boundaries.
The original AUX read command does not support these devices.
The AUX command operation control register "REG_AUX_CMD_REQ" uses b[3:0]
as AUX operacion control, and b[7:4] are status bits and read only.
To change KSV read operation uses "CMD_AUX_NATIVE_READ" from using
the data registers to using AUX FIFO.
The extended command "CMD_AUX_GET_KSV_LIST" is added as
"CMD_AUX_NATIVE_READ" with the 0x10 flag which selects AUX FIFO mode.
Signed-off-by: Hermes Wu <Hermes.wu@xxxxxxxxxx>
---
drivers/gpu/drm/bridge/ite-it6505.c | 16 +++++++++++-----
1 file changed, 11 insertions(+), 5 deletions(-)
diff --git a/drivers/gpu/drm/bridge/ite-it6505.c b/drivers/gpu/drm/bridge/ite-it6505.c
index 9747d7ccf435d536da55c6a3ff79e504b7c724f0..4e6ec1695ae45111d06026d7548d108fac9e5219 100644
--- a/drivers/gpu/drm/bridge/ite-it6505.c
+++ b/drivers/gpu/drm/bridge/ite-it6505.c
@@ -126,6 +126,7 @@
#define REG_AUX_OUT_DATA0 0x27
#define REG_AUX_CMD_REQ 0x2B
+#define M_AUX_REQ_CMD 0x0F
#define AUX_BUSY BIT(5)
#define REG_AUX_DATA_0_7 0x2C
@@ -324,6 +325,9 @@ enum aux_cmd_type {
CMD_AUX_NATIVE_READ = 0x0,
CMD_AUX_NATIVE_WRITE = 0x5,
CMD_AUX_I2C_EDID_READ = 0xB,
+
+ /* KSV read with AUX FIFO extend from CMD_AUX_NATIVE_READ*/
+ CMD_AUX_GET_KSV_LIST = 0x10,
};
enum aux_cmd_reply {
@@ -965,7 +969,8 @@ static ssize_t it6505_aux_operation(struct it6505 *it6505,
it6505_set_bits(it6505, REG_AUX_CTRL, AUX_USER_MODE, AUX_USER_MODE);
aux_op_start:
- if (cmd == CMD_AUX_I2C_EDID_READ) {
+ /* HW AUX FIFO supports only EDID and DCPD KSV FIFO area */
+ if (cmd == CMD_AUX_I2C_EDID_READ || cmd == CMD_AUX_GET_KSV_LIST) {
/* AUX EDID FIFO has max length of AUX_FIFO_MAX_SIZE bytes. */
size = min_t(size_t, size, AUX_FIFO_MAX_SIZE);
/* Enable AUX FIFO read back and clear FIFO */
@@ -996,7 +1001,7 @@ static ssize_t it6505_aux_operation(struct it6505 *it6505,
size);
/* Aux Fire */
- it6505_write(it6505, REG_AUX_CMD_REQ, cmd);
+ it6505_write(it6505, REG_AUX_CMD_REQ, FIELD_GET(M_AUX_REQ_CMD, cmd));
ret = it6505_aux_wait(it6505);
if (ret < 0)
@@ -1030,7 +1035,7 @@ static ssize_t it6505_aux_operation(struct it6505 *it6505,
goto aux_op_start;
}
- if (cmd == CMD_AUX_I2C_EDID_READ) {
+ if (cmd == CMD_AUX_I2C_EDID_READ || cmd == CMD_AUX_GET_KSV_LIST) {
for (i = 0; i < size; i++) {
ret = it6505_read(it6505, REG_AUX_DATA_FIFO);
if (ret < 0)
@@ -1055,7 +1060,7 @@ static ssize_t it6505_aux_operation(struct it6505 *it6505,
ret = i;
aux_op_err:
- if (cmd == CMD_AUX_I2C_EDID_READ) {
+ if (cmd == CMD_AUX_I2C_EDID_READ || cmd == CMD_AUX_GET_KSV_LIST) {
/* clear AUX FIFO */
it6505_set_bits(it6505, REG_AUX_CTRL,
AUX_EN_FIFO_READ | CLR_EDID_FIFO,
@@ -1076,7 +1081,8 @@ static ssize_t it6505_aux_do_transfer(struct it6505 *it6505,
size_t size, enum aux_cmd_reply *reply)
{
int i, ret_size, ret = 0, request_size;
- int fifo_max_size = (cmd == CMD_AUX_I2C_EDID_READ) ? AUX_FIFO_MAX_SIZE : 4;
+ int fifo_max_size = (cmd == CMD_AUX_I2C_EDID_READ || cmd == CMD_AUX_GET_KSV_LIST) ?
+ AUX_FIFO_MAX_SIZE : 4;
mutex_lock(&it6505->aux_lock);
i = 0;
--
2.34.1
