Re: [PATCH v2 5/9] dt-bindings: display: bridge: Add ITE IT6263 LVDS to HDMI converter

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Mon, Oct 14, 2024 at 06:01:49PM +0800, Liu Ying wrote:
> On 10/14/2024, Dmitry Baryshkov wrote:
> 
> [...]
> 
> >>>>> My suggestion would be to add a single root-level property which
> >>>>> specifies which port provides even pixel data.
> >>>>
> >>>> That won't work.  The LVDS source side expects the ports of
> >>>> the sink side specify dual-lvds-{odd,even}-pixels properties.
> >>>
> >>> I didn't notice that these properties are already defined.
> >>>
> >>> As these properties are common between several schema files, please
> >>> extract them to a common schema file (like lvds.yaml).
> >>
> >> I'm not sure how to do that. Is it obvious?
> >> Please shed some light. 
> >>
> >> Only two panel schema files are defining even/odd pixels now -
> >> advantech,idk-2121wr.yaml and panel-simple-lvds-dual-ports.yaml.
> >> Maybe, extract them later when more schema files(especially for
> >> bridges) try to define the same?  I'd like to keep a low profile
> >> for now.
> > 
> > I'd say, please extract those now. Adding third is more than enough and
> > should be avoided. Extracting is pretty simple. One patch to move the
> > definition and descriptions from panel-simple-lvds-dual-ports to a
> > common location (e.g. lvds-dual-ports.yaml). Leave the required
> > constrains in place. Second patch is to add oneOf constraints to the
> > ports. 
> 
> oneOf just sits below ports so that single-port and dual-port
> are documented separately?  That won't pass dt_binding_check
> as the v1 binding has proved that warnings will be generated.
> 
> > port@0 might get the same oneOf + the
> > dual-lvds-{odd,even}-pixels:false case, allowing a single-port
> > definition.
> 
> I don't catch this.
> Below snippet is a draft lvds-dual-port.yaml.
> How can it be referenced in ite,it6263.yaml?

allOf:
 - $ref: /schemas/display/lvds-dual-port.yaml

Another option might be to use $defs, define two combinations:
single-or-dual-port, dual-only-port. Reference them from the panel
bindings and from your bridge bindings by using:

 ports:
    port@0:
      $ref: /schemas/display/lvds.yaml#/#defs/single-or-dual-port

    port@1:
      $ref: /schemas/display/lvds.yaml#/#defs/dual-only-port

(the names are just an example, feel free to come with better
suggestions).

> 
> ---8<---
> allOf:                                                                           
>   - $ref: lvds.yaml#                                                             
>                                                                                  
> properties:                                                                      
>   ports:                                                                         
>     $ref: /schemas/graph.yaml#/properties/ports                                  
>                                                                                  
>     properties:                                                                  
>       port@0:                                                                    
>         $ref: /schemas/graph.yaml#/$defs/port-base                               
>         unevaluatedProperties: false                                             
>         description: the first LVDS input link                                   
>                                                                                  
>         properties:                                                              
>           dual-lvds-odd-pixels:                                                  
>             type: boolean                                                        
>             description: the first sink port for odd pixels                      
>                                                                                  
>           dual-lvds-even-pixels:                                                           
>             type: boolean                                                        
>             description: the first sink port for even pixels                     
>                                                                                  
>         oneOf:                                                                   
>           - required: [dual-lvds-even-pixels]                                    
>           - required: [dual-lvds-odd-pixels]                                     

Also under oneOf:
 - properties:
     dual-lvds-odd-pixels: false
     dual-lvds-even-pixels: false

>                                                                                  
>       port@1:                                                                    
>         $ref: /schemas/graph.yaml#/$defs/port-base                               
>         unevaluatedProperties: false                                             
>         description: the second LVDS input link                                  
>                                                                                  
>         properties:                                                              
>           dual-lvds-even-pixels:                                                 
>             type: boolean                                                        
>             description: the second sink port for even pixels                    
>                                                                                  
>           dual-lvds-odd-pixels:                                                  
>             type: boolean                                                        
>             description: the second sink port for odd pixels                     
>                                                                                  
>         oneOf:                                                                   
>           - required: [dual-lvds-even-pixels]                                    
>           - required: [dual-lvds-odd-pixels]                                     
>                                                                                  
>     required:                                                                    
>       - port@0                                                                   
>       - port@1                                                                   

You allow both single-port and dual-port configurations, so you can not
use this required statement. Please keep this part in the corresponding
panel bindings.

>                                                                                  
> unevaluatedProperties: false   
> ---8<---
> 
> -- 
> Regards,
> Liu Ying
> 

-- 
With best wishes
Dmitry



[Index of Archives]     [Linux DRI Users]     [Linux Intel Graphics]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux