Re: [PATCH RFC 2/3] dt-bindings: opp: Add v2-qcom-adreno vendor bindings

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Sat, Oct 12, 2024 at 01:59:29AM +0530, Akhil P Oommen wrote:
> Add a new schema which extends opp-v2 to support a new vendor specific
> property required for Adreno GPUs found in Qualcomm's SoCs. The new
> property called "qcom,opp-acd-level" carries a u32 value recommended
> for each opp needs to be shared to GMU during runtime.
> 
> Signed-off-by: Akhil P Oommen <quic_akhilpo@xxxxxxxxxxx>
> ---
>  .../bindings/opp/opp-v2-qcom-adreno.yaml           | 84 ++++++++++++++++++++++
>  1 file changed, 84 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/opp/opp-v2-qcom-adreno.yaml b/Documentation/devicetree/bindings/opp/opp-v2-qcom-adreno.yaml
> new file mode 100644
> index 000000000000..9fb828e9da86
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/opp/opp-v2-qcom-adreno.yaml
> @@ -0,0 +1,84 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/opp/opp-v2-qcom-adreno.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Qualcomm Adreno compatible OPP supply
> +
> +description:
> +  Adreno GPUs present in Qualcomm's Snapdragon chipsets uses an OPP specific
> +  ACD related information tailored for the specific chipset. This binding
> +  provides the information needed to describe such a hardware value.
> +
> +maintainers:
> +  - Rob Clark <robdclark@xxxxxxxxx>
> +
> +allOf:
> +  - $ref: opp-v2-base.yaml#
> +
> +properties:
> +  compatible:
> +    const: operating-points-v2-adreno
> +
> +patternProperties:
> +  '^opp-?[0-9]+$':
> +    type: object
> +    additionalProperties: false
> +
> +    properties:
> +      opp-hz: true
> +
> +      opp-level: true
> +
> +      opp-peak-kBps: true
> +
> +      opp-supported-hw: true
> +
> +      qcom,opp-acd-level:
> +        description: |
> +          A positive value representing the acd level associated with this

What is acd?

> +          OPP node. This value is shared to GMU during GPU wake up. It may

What is GMU?

> +          not be present for some OPPs and GMU will disable ACD while

acd or ACD?

> +          transitioning to that OPP.
> +        $ref: /schemas/types.yaml#/definitions/uint32
> +
> +    required:
> +      - opp-hz
> +      - opp-level
> +
> +required:
> +  - compatible
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +

Drop blank line

> +    #include <dt-bindings/power/qcom-rpmpd.h>
> +
> +    gpu_opp_table: opp-table {
> +        compatible = "operating-points-v2-adreno";
> +
> +        opp-550000000 {
> +                opp-hz = /bits/ 64 <550000000>;
> +                opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
> +                opp-peak-kBps = <6074219>;
> +                qcom,opp-acd-level = <0xc0285ffd>;
> +        };
> +
> +        opp-390000000 {
> +                opp-hz = /bits/ 64 <390000000>;
> +                opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
> +                opp-peak-kBps = <3000000>;
> +                qcom,opp-acd-level = <0xc0285ffd>;

That's the same value used everywhere. What's the point? Just encode it
in the driver.

> +        };
> +
> +        opp-300000000 {
> +                opp-hz = /bits/ 64 <300000000>;
> +                opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS_D1>;
> +                opp-peak-kBps = <2136719>;
> +                /* Intentionally left out qcom,opp-acd-level property here */
> +        };
> +

Stray blank line

> +    };
> 
> -- 
> 2.45.2
> 



[Index of Archives]     [Linux DRI Users]     [Linux Intel Graphics]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux