Hi Dmitry
On 10/13/2024 5:20 PM, Dmitry Baryshkov wrote:
On Fri, Oct 11, 2024 at 10:25:13AM -0700, Jessica Zhang wrote:
Only enable the merge_3d block for the video phys encoder when the 3d
blend mode is not *_NONE since there is no need to activate the merge_3d
block for cases where merge_3d is not needed.
Fixes: 3e79527a33a8 ("drm/msm/dpu: enable merge_3d support on sm8150/sm8250")
Suggested-by: Abhinav Kumar <quic_abhinavk@xxxxxxxxxxx>
Signed-off-by: Jessica Zhang <quic_jesszhan@xxxxxxxxxxx>
---
Changes in v2:
- Added more detailed commit message
- Link to v1: https://lore.kernel.org/r/20241009-merge3d-fix-v1-1-0d0b6f5c244e@xxxxxxxxxxx
---
drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_vid.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
LGTM now. Please clarify, is there any dependency between this patch and
[1]
No dependency as such. Both are tackling similar issues though. One for
video mode and the other for writeback thats all. Namely:
1) We should not be enabling merge_3d block if two LMs are not being
used as that block needs to be enabled only to merge two streams. If its
always enabled, its incorrect programming because as per the docs its
mentioned "if required". Even if thats not causing issues, I would
prefer not to enable it always due to the "if required" clause and also
we dont need to enable a hardware sub-block unnecessarily.
2) We should be flushing the merge_3d only if its active like Jessica
wrote in the commit message of [1]. Otherwise, the flush bit will never
be taken by hardware leading to the false timeout errors.
It has been sent as two patches as one is for video mode and the other
for writeback and for writeback it includes both (1) and (2) together in
the same patch.
I thought this separation is fine, if we need to squash it, let me know.
Thanks
Abhinav
[1] https://lore.kernel.org/dri-devel/20241009-mode3d-fix-v1-1-c0258354fadc@xxxxxxxxxxx/
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_vid.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_vid.c
index ba8878d21cf0e1945a393cca806cb64f03b16640..c5e27eeaff0423a69fad98122ffef7e041fbc68e 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_vid.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_vid.c
@@ -302,7 +302,7 @@ static void dpu_encoder_phys_vid_setup_timing_engine(
intf_cfg.stream_sel = 0; /* Don't care value for video mode */
intf_cfg.mode_3d = dpu_encoder_helper_get_3d_blend_mode(phys_enc);
intf_cfg.dsc = dpu_encoder_helper_get_dsc(phys_enc);
- if (phys_enc->hw_pp->merge_3d)
+ if (intf_cfg.mode_3d && phys_enc->hw_pp->merge_3d)
intf_cfg.merge_3d = phys_enc->hw_pp->merge_3d->idx;
spin_lock_irqsave(phys_enc->enc_spinlock, lock_flags);
---
base-commit: a20a91fb1bfac5d05ec5bcf9afe0c9363f6c8c93
change-id: 20240828-merge3d-fix-1a8d005e3277
Best regards,
--
Jessica Zhang <quic_jesszhan@xxxxxxxxxxx>
