On Wed, Oct 09, 2024 at 04:50:13PM GMT, Jun Nie wrote: > > --- > 2 or more SSPPs and dual-DSI interface are need for super wide DSI panel. > And 4 DSC are prefered for power optimal in this case. This patch set > extend number of pipes to 4 and revise related mixer blending logic > to support quad pipe. All these changes depends on the virtual plane > feature to split a super wide drm plane horizontally into 2 or more sub > clip. Thus DMA of multiple SSPPs can share the effort of fetching the > whole drm plane. > > The first pipe pair co-work with the first mixer pair to cover the left > half of screen and 2nd pair of pipes and mixers are for the right half > of screen. If a plane is only for the right half of screen, only one > or two of pipes in the 2nd pipe pair are valid, and no SSPP or mixer is > assinged for invalid pipe. > > For those panel that does not require quad-pipe, only 1 or 2 pipes in > the 1st pipe pair will be used. There is no concept of right half of > screen. > > For legacy non virtual plane mode, the first 1 or 2 pipes are used for > the single SSPP and its multi-rect mode. > > This patch set depends on virtual plane patch set v5 and flexible > number of DSC patch set: > https://patchwork.freedesktop.org/series/135456/ > > Changes in v2: > - Revise the patch sequence with changing to 2 pipes topology first. Then > prepare for quad-pipe setup, then enable quad-pipe at last. Is this the only change? Doesn't seem so. Please don't make it harder than it should be. > - Link to v1: https://lore.kernel.org/all/20240829-sm8650-v6-11-hmd-pocf-mdss-quad-upstream-8-v1-0-bdb05b4b5a2e@xxxxxxxxxx/ > > Signed-off-by: Jun Nie <jun.nie@xxxxxxxxxx> > > --- > Jun Nie (14): > drm/msm/dpu: polish log for resource allocation > drm/msm/dpu: decide right side per last bit > drm/msm/dpu: fix mixer number counter on allocation > drm/msm/dpu: switch RM to use crtc_id rather than enc_id for allocation > drm/msm/dpu: handle pipes as array > drm/msm/dpu: split PIPES_PER_STAGE definition per plane and mixer > drm/msm/dpu: bind correct pingpong for quad pipe > drm/msm/dpu: update mixer number info earlier > drm/msm/dpu: blend pipes per mixer pairs config > drm/msm/dpu: Support quad-pipe in SSPP checking > drm/msm/dpu: Share SSPP info for multi-rect case > drm/msm/dpu: support plane splitting in quad-pipe case > drm/msm/dpu: support SSPP assignment for quad-pipe case > drm/msm/dpu: Enable quad-pipe for DSC and dual-DSI case > > drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c | 74 ++-- > drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.h | 12 +- > drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c | 69 ++-- > drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys.h | 3 +- > drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h | 1 + > drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.c | 2 +- > drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.h | 4 +- > drivers/gpu/drm/msm/disp/dpu1/dpu_hw_mdss.h | 4 +- > drivers/gpu/drm/msm/disp/dpu1/dpu_hw_sspp.h | 2 + > drivers/gpu/drm/msm/disp/dpu1/dpu_kms.h | 12 +- > drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c | 408 +++++++++++++---------- > drivers/gpu/drm/msm/disp/dpu1/dpu_plane.h | 12 +- > drivers/gpu/drm/msm/disp/dpu1/dpu_rm.c | 210 ++++++------ > drivers/gpu/drm/msm/disp/dpu1/dpu_rm.h | 19 +- > drivers/gpu/drm/msm/disp/dpu1/dpu_trace.h | 10 +- > 15 files changed, 478 insertions(+), 364 deletions(-) > --- > base-commit: eac5b436019c2eeb005f7bdf3ca29d5e8f443d67 > change-id: 20241009-sm8650-v6-11-hmd-pocf-mdss-quad-upstream-21-1142507692ba > > Best regards, > -- > Jun Nie <jun.nie@xxxxxxxxxx> > -- With best wishes Dmitry
