Re: [PATCH 2/2] drm/msm/dpu: configure DSC per number in use

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx> 于2024年10月10日周四 06:10写道:
>
> On Wed, 9 Oct 2024 at 09:39, Jun Nie <jun.nie@xxxxxxxxxx> wrote:
> >
> > Only 2 DSC engines are allowed, or no DSC is involved currently.
>
> Can't parse this phrase.

How about this:
If DSC is enabled, the only case is with 2 DSC engines so far.


>
> > We need 4 DSC in quad-pipe topology in future. So let's only configure
> > DSC engines in use, instread of maximum number of DSC engines.
>
> Nit: instead

Yep.
>
> >
> > Signed-off-by: Jun Nie <jun.nie@xxxxxxxxxx>
> > ---
> >  drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c | 13 ++++++++-----
> >  1 file changed, 8 insertions(+), 5 deletions(-)
> >
> > diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c
> > index 39700b13e92f3..e8400b494687c 100644
> > --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c
> > +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c
> > @@ -1871,10 +1871,13 @@ static void dpu_encoder_dsc_pipe_cfg(struct dpu_hw_ctl *ctl,
> >                 ctl->ops.update_pending_flush_dsc(ctl, hw_dsc->idx);
> >  }
> >
> > -static void dpu_encoder_prep_dsc(struct dpu_encoder_virt *dpu_enc,
> > -                                struct drm_dsc_config *dsc)
> > +static void dpu_encoder_prep_dsc(struct drm_encoder *drm_enc)
> >  {
> >         /* coding only for 2LM, 2enc, 1 dsc config */
> > +       struct dpu_encoder_virt *dpu_enc = to_dpu_encoder_virt(drm_enc);
> > +       struct dpu_crtc_state *cstate = to_dpu_crtc_state(drm_enc->crtc->state);
> > +       struct drm_dsc_config *dsc = dpu_enc->dsc;
>
> Why? This doesn't seem to be related to num_dscs introduction.

You mean the comments above these 3 lines? Yeah, it should be removed.
>
> > +       int num_dsc = cstate->num_dscs;
> >         struct dpu_encoder_phys *enc_master = dpu_enc->cur_master;
> >         struct dpu_hw_ctl *ctl = enc_master->hw_ctl;
> >         struct dpu_hw_dsc *hw_dsc[MAX_CHANNELS_PER_ENC];
>
> [...]
>
> > @@ -1953,7 +1956,7 @@ void dpu_encoder_prepare_for_kickoff(struct drm_encoder *drm_enc)
> >         }
> >
> >         if (dpu_enc->dsc)
> > -               dpu_encoder_prep_dsc(dpu_enc, dpu_enc->dsc);
> > +               dpu_encoder_prep_dsc(drm_enc);
> >  }
> >
> >  bool dpu_encoder_is_valid_for_commit(struct drm_encoder *drm_enc)
> >
> > --
> > 2.34.1
> >
>
>
> --
> With best wishes
> Dmitry




[Index of Archives]     [Linux DRI Users]     [Linux Intel Graphics]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux