Re: [PATCH 5/8] dt-bindings: display: bridge: Add ITE IT6263 LVDS to HDMI converter

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 09/30/2024, Biju Das wrote:
> Hi Liu,

Hi Biju,

> 
>> -----Original Message-----
>> From: Biju Das
>> Sent: Monday, September 30, 2024 10:04 AM
>> Subject: RE: [PATCH 5/8] dt-bindings: display: bridge: Add ITE IT6263 LVDS to HDMI converter
>>
>> Hi Liu,
>>
>> thanks for the patch.
>>
>>> -----Original Message-----
>>> From: linux-arm-kernel <linux-arm-kernel-bounces@xxxxxxxxxxxxxxxxxxx>
>>> On Behalf Of Liu Ying
>>> Sent: Monday, September 30, 2024 6:29 AM
>>> Subject: [PATCH 5/8] dt-bindings: display: bridge: Add ITE IT6263 LVDS
>>> to HDMI converter
>>>
>>> Document ITE IT6263 LVDS to HDMI converter.
>>>
>>> Product link:
>>> https://www.ite.com.tw/en/product/cate1/IT6263
>>>
>>> Signed-off-by: Liu Ying <victor.liu@xxxxxxx>
>>> ---
>>>  .../bindings/display/bridge/ite,it6263.yaml   | 310 ++++++++++++++++++
>>>  1 file changed, 310 insertions(+)
>>>  create mode 100644
>>> Documentation/devicetree/bindings/display/bridge/ite,it6263.yaml
>>>
>>> diff --git
>>> a/Documentation/devicetree/bindings/display/bridge/ite,it6263.yaml
>>> b/Documentation/devicetree/bindings/display/bridge/ite,it6263.yaml
>>> new file mode 100644
>>> index 000000000000..97fb81e5bc4a
>>> --- /dev/null
>>> +++ b/Documentation/devicetree/bindings/display/bridge/ite,it6263.yaml
>>> @@ -0,0 +1,310 @@
>>> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) %YAML 1.2
>>> +---
>>> +$id: http://devicetree.org/schemas/display/bridge/ite,it6263.yaml#
>>> +$schema: http://devicetree.org/meta-schemas/core.yaml#
>>> +
>>> +title: ITE IT6263 LVDS to HDMI converter
>>> +
>>> +maintainers:
>>> +  - Liu Ying <victor.liu@xxxxxxx>
>>> +
>>> +description: |
>>> +  The IT6263 is a high-performance single-chip De-SSC(De-Spread
>>> +Spectrum) LVDS
>>> +  to HDMI converter.  Combined with LVDS receiver and HDMI 1.4a
>>> +transmitter,
>>> +  the IT6263 supports LVDS input and HDMI 1.4 output by conversion function.
>>> +  The built-in LVDS receiver can support single-link and dual-link
>>> +LVDS inputs,
>>> +  and the built-in HDMI transmitter is fully compliant with HDMI
>>> +1.4a/3D, HDCP
>>> +  1.2 and backward compatible with DVI 1.0 specification.
>>> +
>>> +  The IT6263 also encodes and transmits up to 8 channels of I2S
>>> + digital audio,  with sampling rate up to 192KHz and sample size up to 24 bits.
>>> + In addition,  an S/PDIF input port takes in compressed audio of up to 192KHz frame rate.
>>> +
>>> +  The newly supported High-Bit Rate(HBR) audio by HDMI specifications
>>> + v1.3 is  provided by the IT6263 in two interfaces: the four I2S
>>> + input ports or the  S/PDIF input port.  With both interfaces the
>>> + highest possible HBR frame rate  is supported at up to 768KHz.
>>> +
>>> +properties:
>>> +  compatible:
>>> +    const: ite,it6263
>>> +
>>> +  reg:
>>> +    maxItems: 1
>>> +
>>> +  clocks:
>>> +    maxItems: 1
>>> +    description: audio master clock
>>> +
>>> +  clock-names:
>>> +    const: mclk
>>> +
>>> +  reset-gpios:
>>> +    maxItems: 1
>>> +
>>> +  ivdd-supply:
>>> +    description: 1.8V digital logic power
>>> +
>>> +  ovdd-supply:
>>> +    description: 3.3V I/O pin power
>>> +
>>> +  txavcc18-supply:
>>> +    description: 1.8V HDMI analog frontend power
>>> +
>>> +  txavcc33-supply:
>>> +    description: 3.3V HDMI analog frontend power
>>> +
>>> +  pvcc1-supply:
>>> +    description: 1.8V HDMI frontend core PLL power
>>> +
>>> +  pvcc2-supply:
>>> +    description: 1.8V HDMI frontend filter PLL power
>>> +
>>> +  avcc-supply:
>>> +    description: 3.3V LVDS frontend power
>>> +
>>> +  anvdd-supply:
>>> +    description: 1.8V LVDS frontend analog power
>>> +
>>> +  apvdd-supply:
>>> +    description: 1.8V LVDS frontend PLL power
>>> +
>>> +  "#sound-dai-cells":
>>> +    const: 0
>>> +
>>> +  ite,i2s-audio-fifo-sources:
>>> +    $ref: /schemas/types.yaml#/definitions/uint32-array
>>> +    minItems: 1
>>> +    maxItems: 4
>>> +    items:
>>> +      enum: [0, 1, 2, 3]
>>> +    description:
>>> +      Each array element indicates the pin number of an I2S serial data input
>>> +      line which is connected to an audio FIFO, from audio FIFO0 to FIFO3.
>>> +
>>> +  ite,rl-channel-swap-audio-sources:
>>> +    $ref: /schemas/types.yaml#/definitions/uint32-array
>>> +    minItems: 1
>>> +    maxItems: 4
>>> +    uniqueItems: true
>>> +    items:
>>> +      enum: [0, 1, 2, 3]
>>> +    description:
>>> +      Each array element indicates an audio source whose right channel and left
>>> +      channel are swapped by this converter. For I2S, the element is the pin
>>> +      number of an I2S serial data input line. For S/PDIF, the element is always
>>> +      0.
>>> +
>>> +  ports:
>>> +    $ref: /schemas/graph.yaml#/properties/ports
>>> +
>>> +    oneOf:
>>> +      - properties:
>>> +          port@0:
>>> +            $ref: /schemas/graph.yaml#/properties/port
>>> +            description: the first LVDS input link
>>> +
>>> +          port@1: false
>>> +
>>> +          port@2:
>>> +            $ref: /schemas/graph.yaml#/properties/port
>>> +            description: video port for the HDMI output
>>> +
>>> +          port@3:
>>> +            $ref: /schemas/graph.yaml#/properties/port
>>> +            description: sound input port
>>> +
>>> +        required:
>>> +          - port@0
>>> +          - port@2
>>> +
>>> +      - properties:
>>> +          port@0:
>>> +            $ref: /schemas/graph.yaml#/$defs/port-base
>>> +            unevaluatedProperties: false
>>> +            description: the first LVDS input link
>>> +
>>> +            properties:
>>> +              dual-lvds-odd-pixels:
>>> +                type: boolean
>>> +                description: the first sink port for odd pixels
>>> +
>>> +              dual-lvds-even-pixels:
>>> +                type: boolean
>>> +                description: the first sink port for even pixels
>>> +
>>> +            oneOf:
>>> +              - required: [dual-lvds-odd-pixels]
>>> +              - required: [dual-lvds-even-pixels]
>>> +
>>> +          port@1:
>>> +            $ref: /schemas/graph.yaml#/$defs/port-base
>>> +            unevaluatedProperties: false
>>> +            description: the second LVDS input link
>>> +
>>> +            properties:
>>> +              dual-lvds-even-pixels:
>>> +                type: boolean
>>> +                description: the second sink port for even pixels
>>> +
>>> +              dual-lvds-odd-pixels:
>>> +                type: boolean
>>> +                description: the second sink port for odd pixels
>>> +
>>> +            oneOf:
>>> +              - required: [dual-lvds-even-pixels]
>>> +              - required: [dual-lvds-odd-pixels]
>>
>>
>>> +
>>> +          port@2:
>>> +            $ref: /schemas/graph.yaml#/properties/port
>>> +            description: video port for the HDMI output
>>> +
>>> +          port@3:
>>> +            $ref: /schemas/graph.yaml#/properties/port
>>> +            description: sound input port
>>
>> What about single lvds as device support it?
>>
>> Cheers,
>> Biju
>>
>>> +
>>> +        required:
>>> +          - port@0
>>> +          - port@1
>>> +          - port@2
>>> +
>>> +        allOf:
>>> +          - if:
>>> +              properties:
>>> +                port@0:
>>> +                  required:
>>> +                    - dual-lvds-odd-pixels
>>> +            then:
>>> +              properties:
>>> +                port@1:
>>> +                  properties:
>>> +                    dual-lvds-odd-pixels: false
>>> +
>>> +          - if:
>>> +              properties:
>>> +                port@0:
>>> +                  required:
>>> +                    - dual-lvds-even-pixels
>>> +            then:
>>> +              properties:
>>> +                port@1:
>>> +                  properties:
>>> +                    dual-lvds-even-pixels: false
> 
> Do we need to document ite,data-mapping to support both VESA and JEIDA formats??
> 
> Or
> 
> Is there any run time info available to get this info? Currently,
> I see it is hardcoded in driver.

I think there are two options:
1) Reference the data-mapping property in lvds-data-mapping.yaml
   Question is that only jeida-18, jeida-24 and vesa-24 are
   enumerated, while IT6263 supports something like jeida-30 and
   vesa-30(not sure if they are standarized or not) with 5 data
   lanes(A-E) per LVDS link as the LVDS mapping table in IT6263
   datasheet mentions.

2) Document the number of data lanes per LVDS link
   This is enough. data-mapping is kind of too much information
   from DT point of view. Linux display bridge drivers support
   runtime bus format negotiation to determine the data mapping.
   So maybe a property like this is ok:

   ite,lvds-link-num-data-lanes:                                                  
    $ref: /schemas/types.yaml#/definitions/uint8                                 
    enum: [3, 4, 5]

   BTW, I only tested 4 data lanes. Not sure if the other 2 work
   or not.

Laurent, Rob, any thoughts?

> 
> Cheers,
> Biju
> 
>>> +
>>> +required:
>>> +  - compatible
>>> +  - reg
>>> +  - ivdd-supply
>>> +  - ovdd-supply
>>> +  - txavcc18-supply
>>> +  - txavcc33-supply
>>> +  - pvcc1-supply
>>> +  - pvcc2-supply
>>> +  - avcc-supply
>>> +  - anvdd-supply
>>> +  - apvdd-supply
>>> +  - ports
>>> +
>>> +additionalProperties: false
>>> +
>>> +examples:
>>> +  - |
>>> +    /* single-link LVDS input */
>>> +    #include <dt-bindings/gpio/gpio.h>
>>> +
>>> +    i2c {
>>> +        #address-cells = <1>;
>>> +        #size-cells = <0>;
>>> +
>>> +        hdmi@4c {
>>> +            compatible = "ite,it6263";
>>> +            reg = <0x4c>;
>>> +            reset-gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
>>> +            ivdd-supply = <&reg_buck5>;
>>> +            ovdd-supply = <&reg_vext_3v3>;
>>> +            txavcc18-supply = <&reg_buck5>;
>>> +            txavcc33-supply = <&reg_vext_3v3>;
>>> +            pvcc1-supply = <&reg_buck5>;
>>> +            pvcc2-supply = <&reg_buck5>;
>>> +            avcc-supply = <&reg_vext_3v3>;
>>> +            anvdd-supply = <&reg_buck5>;
>>> +            apvdd-supply = <&reg_buck5>;
>>> +
>>> +            ports {
>>> +                #address-cells = <1>;
>>> +                #size-cells = <0>;
>>> +
>>> +                port@0 {
>>> +                    reg = <0>;
>>> +
>>> +                    it6263_lvds_link1: endpoint {
>>> +                        remote-endpoint = <&ldb_lvds_ch0>;
>>> +                    };
>>> +                };
>>> +
>>> +                port@2 {
>>> +                    reg = <2>;
>>> +
>>> +                    it6263_out: endpoint {
>>> +                        remote-endpoint = <&hdmi_in>;
>>> +                    };
>>> +                };
>>> +            };
>>> +        };
>>> +    };
>>> +
>>> +  - |
>>> +    /* dual-link LVDS input */
>>> +    #include <dt-bindings/gpio/gpio.h>
>>> +
>>> +    i2c {
>>> +        #address-cells = <1>;
>>> +        #size-cells = <0>;
>>> +
>>> +        hdmi@4c {
>>> +            compatible = "ite,it6263";
>>> +            reg = <0x4c>;
>>> +            reset-gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
>>> +            ivdd-supply = <&reg_buck5>;
>>> +            ovdd-supply = <&reg_vext_3v3>;
>>> +            txavcc18-supply = <&reg_buck5>;
>>> +            txavcc33-supply = <&reg_vext_3v3>;
>>> +            pvcc1-supply = <&reg_buck5>;
>>> +            pvcc2-supply = <&reg_buck5>;
>>> +            avcc-supply = <&reg_vext_3v3>;
>>> +            anvdd-supply = <&reg_buck5>;
>>> +            apvdd-supply = <&reg_buck5>;
>>> +
>>> +            ports {
>>> +                #address-cells = <1>;
>>> +                #size-cells = <0>;
>>> +
>>> +                port@0 {
>>> +                    reg = <0>;
>>> +                    dual-lvds-odd-pixels;
>>> +
>>> +                    it6263_lvds_link1_dual: endpoint {
>>> +                        remote-endpoint = <&ldb_lvds_ch0>;
>>> +                    };
>>> +                };
>>> +
>>> +                port@1 {
>>> +                    reg = <1>;
>>> +                    dual-lvds-even-pixels;
>>> +
>>> +                    it6263_lvds_link2_dual: endpoint {
>>> +                        remote-endpoint = <&ldb_lvds_ch1>;
>>> +                    };
>>> +                };
>>> +
>>> +                port@2 {
>>> +                    reg = <2>;
>>> +
>>> +                    it6263_out_dual: endpoint {
>>> +                        remote-endpoint = <&hdmi_in>;
>>> +                    };
>>> +                };
>>> +            };
>>> +        };
>>> +    };
>>> --
>>> 2.34.1
>>>
> 

-- 
Regards,
Liu Ying




[Index of Archives]     [Linux DRI Users]     [Linux Intel Graphics]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux