Hi,
On Thu, Sep 26, 2024 at 10:15 AM Doug Anderson <dianders@xxxxxxxxxxxx> wrote:
>
> Hi,
>
> On Thu, Sep 26, 2024 at 2:29 AM Pin-yen Lin <treapking@xxxxxxxxxxxx> wrote:
> >
> > The bridge might miss the display change events when it's powered off.
> > This happens when a user changes the external monitor when the system
> > is suspended and the embedded controller doesn't not wake AP up.
> >
> > It's also observed that one DP-to-HDMI bridge doesn't work correctly
> > when there is no EDID read after it is powered on.
> >
> > Drop the cache to force an EDID read after system resume to fix this.
> >
> > Fixes: 8bdfc5dae4e3 ("drm/bridge: anx7625: Add anx7625 MIPI DSI/DPI to DP")
> > Signed-off-by: Pin-yen Lin <treapking@xxxxxxxxxxxx>
> > Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
>
> I don't think it needs a re-spin, but for future reference you're
> always supposed to move your own Signed-off-by to the bottom whenever
> you "touch" a patch. Thus yours should be below Dmitry's tag.
>
> In any case,
>
> Reviewed-by: Douglas Anderson <dianders@xxxxxxxxxxxx>
>
> If these haven't been applied and there's no other feedback at the end
> of next week I'll plan to apply both this and the next patch to
> drm-misc-fixes.
Dang. My brain wasn't working quite right and I pushed these to
drm-misc-next instead of drm-misc-fixes. I'll assume that this is OK
because the problem fixed isn't exactly new and the patch will still
make it to mainline before too long. If this causes anyone problems
let me know and I can also land it on drm-misc-fixes.
[1/2] drm/bridge: anx7625: Drop EDID cache on bridge power off
commit: 00ae002116a14c2e6a342c4c9ae080cdbb9b4b21
-Doug
