Split of the bindings was artificial and not helping - we end up with
multiple binding files for very similar devices thus increasing the
chances of using different order of reg and clocks entries.
Unify DPU bindings of SC7280 and SM8450, because they are the same.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
---
.../bindings/display/msm/qcom,sc7280-dpu.yaml | 2 +
.../bindings/display/msm/qcom,sm8450-dpu.yaml | 139 ---------------------
2 files changed, 2 insertions(+), 139 deletions(-)
diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sc7280-dpu.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sc7280-dpu.yaml
index 3d69a573b450..750230839fc9 100644
--- a/Documentation/devicetree/bindings/display/msm/qcom,sc7280-dpu.yaml
+++ b/Documentation/devicetree/bindings/display/msm/qcom,sc7280-dpu.yaml
@@ -8,6 +8,7 @@ title: Qualcomm Display DPU on SC7280
maintainers:
- Bjorn Andersson <andersson@xxxxxxxxxx>
+ - Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- Krishna Manikandan <quic_mkrishn@xxxxxxxxxxx>
$ref: /schemas/display/msm/dpu-common.yaml#
@@ -18,6 +19,7 @@ properties:
- qcom,sc7280-dpu
- qcom,sc8280xp-dpu
- qcom,sm8350-dpu
+ - qcom,sm8450-dpu
reg:
items:
diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sm8450-dpu.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sm8450-dpu.yaml
deleted file mode 100644
index 2a5d3daed0e1..000000000000
--- a/Documentation/devicetree/bindings/display/msm/qcom,sm8450-dpu.yaml
+++ /dev/null
@@ -1,139 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
-%YAML 1.2
----
-$id: http://devicetree.org/schemas/display/msm/qcom,sm8450-dpu.yaml#
-$schema: http://devicetree.org/meta-schemas/core.yaml#
-
-title: Qualcomm SM8450 Display DPU
-
-maintainers:
- - Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
-
-$ref: /schemas/display/msm/dpu-common.yaml#
-
-properties:
- compatible:
- const: qcom,sm8450-dpu
-
- reg:
- items:
- - description: Address offset and size for mdp register set
- - description: Address offset and size for vbif register set
-
- reg-names:
- items:
- - const: mdp
- - const: vbif
-
- clocks:
- items:
- - description: Display hf axi
- - description: Display sf axi
- - description: Display ahb
- - description: Display lut
- - description: Display core
- - description: Display vsync
-
- clock-names:
- items:
- - const: bus
- - const: nrt_bus
- - const: iface
- - const: lut
- - const: core
- - const: vsync
-
-required:
- - compatible
- - reg
- - reg-names
- - clocks
- - clock-names
-
-unevaluatedProperties: false
-
-examples:
- - |
- #include <dt-bindings/clock/qcom,sm8450-dispcc.h>
- #include <dt-bindings/clock/qcom,gcc-sm8450.h>
- #include <dt-bindings/interrupt-controller/arm-gic.h>
- #include <dt-bindings/interconnect/qcom,sm8450.h>
- #include <dt-bindings/power/qcom,rpmhpd.h>
-
- display-controller@ae01000 {
- compatible = "qcom,sm8450-dpu";
- reg = <0x0ae01000 0x8f000>,
- <0x0aeb0000 0x2008>;
- reg-names = "mdp", "vbif";
-
- clocks = <&gcc GCC_DISP_HF_AXI_CLK>,
- <&gcc GCC_DISP_SF_AXI_CLK>,
- <&dispcc DISP_CC_MDSS_AHB_CLK>,
- <&dispcc DISP_CC_MDSS_MDP_LUT_CLK>,
- <&dispcc DISP_CC_MDSS_MDP_CLK>,
- <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
- clock-names = "bus",
- "nrt_bus",
- "iface",
- "lut",
- "core",
- "vsync";
-
- assigned-clocks = <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
- assigned-clock-rates = <19200000>;
-
- operating-points-v2 = <&mdp_opp_table>;
- power-domains = <&rpmhpd RPMHPD_MMCX>;
-
- interrupt-parent = <&mdss>;
- interrupts = <0>;
-
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- port@0 {
- reg = <0>;
- dpu_intf1_out: endpoint {
- remote-endpoint = <&dsi0_in>;
- };
- };
-
- port@1 {
- reg = <1>;
- dpu_intf2_out: endpoint {
- remote-endpoint = <&dsi1_in>;
- };
- };
- };
-
- mdp_opp_table: opp-table {
- compatible = "operating-points-v2";
-
- opp-172000000{
- opp-hz = /bits/ 64 <172000000>;
- required-opps = <&rpmhpd_opp_low_svs_d1>;
- };
-
- opp-200000000 {
- opp-hz = /bits/ 64 <200000000>;
- required-opps = <&rpmhpd_opp_low_svs>;
- };
-
- opp-325000000 {
- opp-hz = /bits/ 64 <325000000>;
- required-opps = <&rpmhpd_opp_svs>;
- };
-
- opp-375000000 {
- opp-hz = /bits/ 64 <375000000>;
- required-opps = <&rpmhpd_opp_svs_l1>;
- };
-
- opp-500000000 {
- opp-hz = /bits/ 64 <500000000>;
- required-opps = <&rpmhpd_opp_nom>;
- };
- };
- };
-...
--
2.43.0
