On Sep 30 2024, Werner Sembach wrote: > Am 28.09.24 um 12:05 schrieb Benjamin Tissoires: > > On Sep 28 2024, Werner Sembach wrote: > > > Hi, > > > > > > Am 28.09.24 um 09:27 schrieb Benjamin Tissoires: > > > > On Sep 28 2024, Armin Wolf wrote: > > > > > Am 27.09.24 um 23:01 schrieb Pavel Machek: > > > > > > > > > > > Hi! > > > > > > > > > > > > > The TUXEDO Sirius 16 Gen1 and TUXEDO Sirius 16 Gen2 devices have a per-key > > > > > > > controllable RGB keyboard backlight. The firmware API for it is implemented > > > > > > > via WMI. > > > > > > Ok. > > > > > > > > > > > > > To make the backlight userspace configurable this driver emulates a > > > > > > > LampArray HID device and translates the input from hidraw to the > > > > > > > corresponding WMI calls. This is a new approach as the leds subsystem lacks > > > > > > > a suitable UAPI for per-key keyboard backlights, and like this no new UAPI > > > > > > > needs to be established. > > > > > > Please don't. > > > > > > > > > > > > a) I don't believe emulating crazy HID interface si right thing to > > > > > > do. (Ton of magic constants. IIRC it stores key positions with > > > > > > micrometer accuracy or something that crazy. How is userland going to > > > > > > use this? Will we update micrometers for every single machine?) > > > > This is exactly why I suggest to make use of HID-BPF. The machine > > > > specifics is going to be controlled by userspace, leaving out the crazy > > > > bits out of the kernel. > > > From just a quick look at > > > https://www.kernel.org/doc/html/latest/hid/hid-bpf.html HID-BPF is some kind > > > HID remapping? > > Yes. HID-BPF allows to customize a HID device by changing the report > > descriptor and/or the events, and the requests made from hidraw. > > > > It's a HID -> HID conversion, but controlled by userspace. > > > > See [0] for a tutorial. > > > > > But the device in question nativly does not have a hid interface for the > > > backlight. It is controlled via WMI calls. > > > > > > Afaik userspace on linux has no access to WMI? How could HID-BPF implement > > > the WMI calls? > > You'll need a thin WMI to HID wrapper, but without LampArray. > > Then you load the HID-BPF program from userspace, that program knows > > about the specifics of the device, and can do the LampArray transform. > > > > Which means that once the wmi-to-hid driver specific to this device is > > built in the kernel, you can adjust your LampArray implementation (the > > device specifics micrometers and what not) from usersapce. > > > > > > > > Even if it is, > > > > > > > > > > > > b) The emulation should go to generic layer, it is not specific to > > > > > > your hardware. > > > > Well, there is not so much about an emulation here. It's a different way > > > > of presenting the information. > > > > But given that HID LampArray is a HID standard, userspace is able to > > > > implement it once for all the operating systems, which is why this is so > > > > appealing for them. For reference, we have the same issue with SDL and > > > > Steam regarding advanced game controller: they very much prefer to > > > > directly use HID(raw) to talk to the device instead of having a Linux > > > > specific interface. > > > > > > > > Also, starting with v6.12, systemd (logind) will be able to provide > > > > hidraw node access to non root applications (in the same way you can > > > > request an input evdev node). So HID LampArray makes a lot of sense IMO. > > > > > > > > > Maybe introducing a misc-device which provides an ioctl-based API similar > > > > > to the HID LampArray would be a solution? > > > > > > > > > > Basically we would need: > > > > > - ioctl for querying the supported LEDs and their properties > > > > > - ioctl for enabling/disabling autonomous mode > > > > > - ioctl for updating a range of LEDs > > > > > - ioctl for updating multiple LEDs at once > > > > You'll definitely get the API wrong at first, then you'll need to adapt > > > > for a new device, extend it, etc... But then, you'll depend on one > > > > userspace application that can talk to your custom ioctls, because cross > > > > platform applications will have to implement LampArray, and they'ĺl > > > > probably skip your custom ioctls. And once that userspace application is > > > > gone, you'll still have to maintain this forever. > > > > > > > > Also, the application needs to have root access to that misc device, or > > > > you need to add extra support for it in systemd... > > > > > > > > > If we implement this as a separate subsystem ("illumination subsystem"), then different > > > > > drivers could use this. This would also allow us to add additional ioctl calls later > > > > > for more features. > > > > Again, I strongly advise against this. > > > > > > > > I'll just reiterate what makes the more sense to me: > > > > - provide a thin wmi-to-hid layer that creates a normal regular HID > > > > device from your device (could be using vendor collections) > > > This is what this driver tries to be. > > Except that your current implementation also does the LampArray > > conversion. I think it'll make more sense to provide an almost raw > > access to the underlying protocol (think of it like your own Tuxedo > > vendor collection in HID), and handle the LampArray weirdeness in bpf: > > definition of the device physicals, conversion from HID LampArray > > commands into Tuxedo specifics. > > > > > > - deal with the LampArray bits in the HID stack, that we can reuse for > > > > other devices (I was planing on getting there for my Corsair and > > > > Logitech keyboads). > > > If a greater efford in the hid stack is planed here i would be all for it. > > That's what makes more sense to me at least. Other operating systems > > export the HID nodes directly, so userspace prefers to talk to the > > device directly. So I'd rather rely on a standard than trying to fit the > > current use case in a new interface that will probably fail. > > > > > On my todolist i would try to integrate the leds subsystem with the > > > LampArray interface next, just a simple implementation treating the whole > > > keyboard as a single led. > > That could be done in HID-core as well. Making it part of HID-core also > > means that once we get an actual LampArray device, we'll get support for > > it from day one. > > > > > > - Meanwhile, while prototyping the LampArray support in userspace and > > > > kernelspace, make use of HID-BPF to transform your vendor protocol > > > > into LampArray. This will allow to fix things without having to > > > > support them forever. This is why HID-BPF exists: so we can create > > > > crazy but safe kernel interfaces, without having to support them > > > > forever. > > > I guess i have to do some readup xD. > > > > > Please have a look at the tutorial[0]. That tutorial is missing the > > couple of new hooks you'll need to change the requests emitted from > > hidraw as LampArray into Tuxedo, but I can also give you a help into > > making it happening. > > > > Basically, you also need to define a .hid_hw_request callback in your > > HID_BPF_OPS and extract all of the code you have here into that bpf > > program (which is roughly C code). > > > > Cheers, > > Benjamin > > > > > > [0] https://libevdev.pages.freedesktop.org/udev-hid-bpf/tutorial.html > > > 2 question left on my side: > > - Does the BPF approach have performance/latency impact? Not anything you'll notice. BPF is used in network on much more demanding latency purposes. And IIRC, jumping into BPF is almost a no-op nowadays. From what I can tell from the BPF maintainer in his ALPSS presentation last week: " BPF C code is compiled into BPF ISA with BPF calling convention, JIT translate BPF ISA into native ISA, One to one mapping of BPF registers to x86 registers. " > > - Does it work during boot? (e.g. early control via the leds subsystem to > stop firmware induced rainbow puke) > Nope. It gets loaded once udev enumerates the device, so unless you craft a special intird with both the loader and the bpf object it is not. However, if that rainbow is bothering you, you can "initialize" the keyboard to a sane state with your WMI-to-HID driver before exposing the device to HID. FWIW, the use of BPF only allows you to not corner yourself. If you failed at your LampArray implementation, you'll have to deal with it forever-ish. So it's perfectly sensible to use BPF as an intermediate step where you develop both userspace and kernel space and then convert back the BPF into a proper HID driver. Being able to develop a kernel driver without having to reboot and being sure you won't crash your kernel is a game changer ;) Cheers, Benjamin
