On Thu, 26 Sept 2024 at 11:46, <Hermes.Wu@xxxxxxxxxx> wrote:
>
> >On Thu, Sep 26, 2024 at 03:47:53PM GMT, Hermes Wu wrote:
> >> From: Hermes Wu <Hermes.wu@xxxxxxxxxx>
> >>
> >> Add aux operaction command which supports read DPCD KSV FIFO with aux
> >> fifo.
> >
> >Nit: AUX, FIFO. Please be consistent in your commit messages.
> >
> >>
> >>
> >> Fixes: b5c84a9edcd4 ("drm/bridge: add it6505 driver")
> >
> >Why is this considered to be a fix? From the commit message it sounds like a new feature.
>
> It will be a necessary change for HDCP reads KSV FIFO.
First of all, it should be a part of the commit message, because the
patch itself doesn't fix an issue.
Judging by the amount and the intrusivity of the patches, I'd say that
all KSV / HDCP-related patches constitute a new development, rather
than a bugfix.
>
>
> >
> >LGTM otherwise
> >
> >> Signed-off-by: Hermes Wu <Hermes.wu@xxxxxxxxxx>
> >> ---
> >> drivers/gpu/drm/bridge/ite-it6505.c | 12 ++++++++----
> >> 1 file changed, 8 insertions(+), 4 deletions(-)
> >>
> >> diff --git a/drivers/gpu/drm/bridge/ite-it6505.c
> >> b/drivers/gpu/drm/bridge/ite-it6505.c
> >> index b451d3c2ac1d..0583abdca75f 100644
> >> --- a/drivers/gpu/drm/bridge/ite-it6505.c
> >> +++ b/drivers/gpu/drm/bridge/ite-it6505.c
> >> @@ -324,6 +324,9 @@ enum aux_cmd_type {
> >> CMD_AUX_NATIVE_READ = 0x0,
> >> CMD_AUX_NATIVE_WRITE = 0x5,
> >> CMD_AUX_I2C_EDID_READ = 0xB,
> >> +
> >> + /* KSV list read using AUX native read with FIFO */
> >> + CMD_AUX_GET_KSV_LIST = 0x10,
> >> };
> >>
> >> enum aux_cmd_reply {
> >> @@ -965,7 +968,8 @@ static ssize_t it6505_aux_operation(struct it6505 *it6505,
> >> it6505_set_bits(it6505, REG_AUX_CTRL, AUX_USER_MODE, AUX_USER_MODE);
> >>
> >> aux_op_start:
> >> - if (cmd == CMD_AUX_I2C_EDID_READ) {
> >> + /* HW AUX FIFO supports only EDID and DCPD KSV FIFO aread */
> >> + if (cmd == CMD_AUX_I2C_EDID_READ || cmd == CMD_AUX_GET_KSV_LIST) {
> >> /* AUX EDID FIFO has max length of AUX_FIFO_MAX_SIZE bytes. */
> >> size = min_t(size_t, size, AUX_FIFO_MAX_SIZE);
> >> /* Enable AUX FIFO read back and clear FIFO */ @@ -1030,7 +1034,7
> >> @@ static ssize_t it6505_aux_operation(struct it6505 *it6505,
> >> goto aux_op_start;
> >> }
> >>
> >> - if (cmd == CMD_AUX_I2C_EDID_READ) {
> >> + if (cmd == CMD_AUX_I2C_EDID_READ || cmd == CMD_AUX_GET_KSV_LIST) {
> >> for (i = 0; i < size; i++) {
> >> ret = it6505_read(it6505, REG_AUX_DATA_FIFO);
> >> if (ret < 0)
> >> @@ -1055,7 +1059,7 @@ static ssize_t it6505_aux_operation(struct it6505 *it6505,
> >> ret = i;
> >>
> >> aux_op_err:
> >> - if (cmd == CMD_AUX_I2C_EDID_READ) {
> >> + if (cmd == CMD_AUX_I2C_EDID_READ || cmd == CMD_AUX_GET_KSV_LIST) {
> >> /* clear AUX FIFO */
> >> it6505_set_bits(it6505, REG_AUX_CTRL,
> >> AUX_EN_FIFO_READ | CLR_EDID_FIFO, @@ -1079,7 +1083,7 @@ static
> >> ssize_t it6505_aux_do_transfer(struct it6505 *it6505,
> >>
> >> mutex_lock(&it6505->aux_lock);
> >> for (i = 0; i < size; ) {
> >> - if (cmd == CMD_AUX_I2C_EDID_READ)
> >> + if (cmd == CMD_AUX_I2C_EDID_READ || cmd == CMD_AUX_GET_KSV_LIST)
> >> request_size = min_t(int, (int)size - i, AUX_FIFO_MAX_SIZE);
> >> else
> >> request_size = min_t(int, (int)size - i, 4);
> >> --
> >> 2.34.1
> >>
> >
> >--
> >With best wishes
> >Dmitry
> >
>
> BR,
> Hermes
>
--
With best wishes
Dmitry
