[PATCH AUTOSEL 6.11 155/244] drm/amd/display: fix a UBSAN warning in DML2.1

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Aurabindo Pillai <aurabindo.pillai@xxxxxxx>

[ Upstream commit eaf3adb8faab611ba57594fa915893fc93a7788c ]

When programming phantom pipe, since cursor_width is explicity set to 0,
this causes calculation logic to trigger overflow for an unsigned int
triggering the kernel's UBSAN check as below:

[   40.962845] UBSAN: shift-out-of-bounds in /tmp/amd.EfpumTkO/amd/amdgpu/../display/dc/dml2/dml21/src/dml2_core/dml2_core_dcn4_calcs.c:3312:34
[   40.962849] shift exponent 4294967170 is too large for 32-bit type 'unsigned int'
[   40.962852] CPU: 1 PID: 1670 Comm: gnome-shell Tainted: G        W  OE      6.5.0-41-generic #41~22.04.2-Ubuntu
[   40.962854] Hardware name: Gigabyte Technology Co., Ltd. X670E AORUS PRO X/X670E AORUS PRO X, BIOS F21 01/10/2024
[   40.962856] Call Trace:
[   40.962857]  <TASK>
[   40.962860]  dump_stack_lvl+0x48/0x70
[   40.962870]  dump_stack+0x10/0x20
[   40.962872]  __ubsan_handle_shift_out_of_bounds+0x1ac/0x360
[   40.962878]  calculate_cursor_req_attributes.cold+0x1b/0x28 [amdgpu]
[   40.963099]  dml_core_mode_support+0x6b91/0x16bc0 [amdgpu]
[   40.963327]  ? srso_alias_return_thunk+0x5/0x7f
[   40.963331]  ? CalculateWatermarksMALLUseAndDRAMSpeedChangeSupport+0x18b8/0x2790 [amdgpu]
[   40.963534]  ? srso_alias_return_thunk+0x5/0x7f
[   40.963536]  ? dml_core_mode_support+0xb3db/0x16bc0 [amdgpu]
[   40.963730]  dml2_core_calcs_mode_support_ex+0x2c/0x90 [amdgpu]
[   40.963906]  ? srso_alias_return_thunk+0x5/0x7f
[   40.963909]  ? dml2_core_calcs_mode_support_ex+0x2c/0x90 [amdgpu]
[   40.964078]  core_dcn4_mode_support+0x72/0xbf0 [amdgpu]
[   40.964247]  dml2_top_optimization_perform_optimization_phase+0x1d3/0x2a0 [amdgpu]
[   40.964420]  dml2_build_mode_programming+0x23d/0x750 [amdgpu]
[   40.964587]  dml21_validate+0x274/0x770 [amdgpu]
[   40.964761]  ? srso_alias_return_thunk+0x5/0x7f
[   40.964763]  ? resource_append_dpp_pipes_for_plane_composition+0x27c/0x3b0 [amdgpu]
[   40.964942]  dml2_validate+0x504/0x750 [amdgpu]
[   40.965117]  ? dml21_copy+0x95/0xb0 [amdgpu]
[   40.965291]  ? srso_alias_return_thunk+0x5/0x7f
[   40.965295]  dcn401_validate_bandwidth+0x4e/0x70 [amdgpu]
[   40.965491]  update_planes_and_stream_state+0x38d/0x5c0 [amdgpu]
[   40.965672]  update_planes_and_stream_v3+0x52/0x1e0 [amdgpu]
[   40.965845]  ? srso_alias_return_thunk+0x5/0x7f
[   40.965849]  dc_update_planes_and_stream+0x71/0xb0 [amdgpu]

Fix this by adding a guard for checking cursor width before triggering
the size calculation.

Reviewed-by: Rodrigo Siqueira <rodrigo.siqueira@xxxxxxx>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@xxxxxxx>
Signed-off-by: Wayne Lin <wayne.lin@xxxxxxx>
Tested-by: Daniel Wheeler <daniel.wheeler@xxxxxxx>
Signed-off-by: Alex Deucher <alexander.deucher@xxxxxxx>
Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>
---
 .../src/dml2_core/dml2_core_dcn4_calcs.c      | 93 ++++++++++---------
 1 file changed, 49 insertions(+), 44 deletions(-)

diff --git a/drivers/gpu/drm/amd/display/dc/dml2/dml21/src/dml2_core/dml2_core_dcn4_calcs.c b/drivers/gpu/drm/amd/display/dc/dml2/dml21/src/dml2_core/dml2_core_dcn4_calcs.c
index 6f4026e396e09..c40cd5d634568 100644
--- a/drivers/gpu/drm/amd/display/dc/dml2/dml21/src/dml2_core/dml2_core_dcn4_calcs.c
+++ b/drivers/gpu/drm/amd/display/dc/dml2/dml21/src/dml2_core/dml2_core_dcn4_calcs.c
@@ -7231,10 +7231,9 @@ static bool dml_core_mode_support(struct dml2_core_calcs_mode_support_ex *in_out
 	/* Cursor Support Check */
 	mode_lib->ms.support.CursorSupport = true;
 	for (k = 0; k < mode_lib->ms.num_active_planes; k++) {
-		if (display_cfg->plane_descriptors[k].cursor.cursor_width > 0.0) {
-			if (display_cfg->plane_descriptors[k].cursor.cursor_bpp == 64 && mode_lib->ip.cursor_64bpp_support == false) {
+		if (display_cfg->plane_descriptors[k].cursor.num_cursors > 0) {
+			if (display_cfg->plane_descriptors[k].cursor.cursor_bpp == 64 && mode_lib->ip.cursor_64bpp_support == false)
 				mode_lib->ms.support.CursorSupport = false;
-			}
 		}
 	}
 
@@ -8091,27 +8090,31 @@ static bool dml_core_mode_support(struct dml2_core_calcs_mode_support_ex *in_out
 	for (k = 0; k < mode_lib->ms.num_active_planes; ++k) {
 		double line_time_us = (double)display_cfg->stream_descriptors[display_cfg->plane_descriptors[k].stream_index].timing.h_total / ((double)display_cfg->stream_descriptors[display_cfg->plane_descriptors[k].stream_index].timing.pixel_clock_khz / 1000);
 		bool cursor_not_enough_urgent_latency_hiding = 0;
-		calculate_cursor_req_attributes(
-			display_cfg->plane_descriptors[k].cursor.cursor_width,
-			display_cfg->plane_descriptors[k].cursor.cursor_bpp,
 
-			// output
-			&s->cursor_lines_per_chunk[k],
-			&s->cursor_bytes_per_line[k],
-			&s->cursor_bytes_per_chunk[k],
-			&s->cursor_bytes[k]);
-
-		calculate_cursor_urgent_burst_factor(
-			mode_lib->ip.cursor_buffer_size,
-			display_cfg->plane_descriptors[k].cursor.cursor_width,
-			s->cursor_bytes_per_chunk[k],
-			s->cursor_lines_per_chunk[k],
-			line_time_us,
-			mode_lib->ms.UrgLatency,
+		if (display_cfg->plane_descriptors[k].cursor.num_cursors > 0) {
+			calculate_cursor_req_attributes(
+				display_cfg->plane_descriptors[k].cursor.cursor_width,
+				display_cfg->plane_descriptors[k].cursor.cursor_bpp,
+
+				// output
+				&s->cursor_lines_per_chunk[k],
+				&s->cursor_bytes_per_line[k],
+				&s->cursor_bytes_per_chunk[k],
+				&s->cursor_bytes[k]);
+
+			calculate_cursor_urgent_burst_factor(
+				mode_lib->ip.cursor_buffer_size,
+				display_cfg->plane_descriptors[k].cursor.cursor_width,
+				s->cursor_bytes_per_chunk[k],
+				s->cursor_lines_per_chunk[k],
+				line_time_us,
+				mode_lib->ms.UrgLatency,
+
+				// output
+				&mode_lib->ms.UrgentBurstFactorCursor[k],
+				&cursor_not_enough_urgent_latency_hiding);
+		}
 
-			// output
-			&mode_lib->ms.UrgentBurstFactorCursor[k],
-			&cursor_not_enough_urgent_latency_hiding);
 		mode_lib->ms.UrgentBurstFactorCursorPre[k] = mode_lib->ms.UrgentBurstFactorCursor[k];
 
 #ifdef __DML_VBA_DEBUG__
@@ -10592,31 +10595,33 @@ static bool dml_core_mode_programming(struct dml2_core_calcs_mode_programming_ex
 
 	for (k = 0; k < s->num_active_planes; ++k) {
 		bool cursor_not_enough_urgent_latency_hiding = 0;
-		double line_time_us;
+		double line_time_us = 0.0;
 
-		calculate_cursor_req_attributes(
-			display_cfg->plane_descriptors[k].cursor.cursor_width,
-			display_cfg->plane_descriptors[k].cursor.cursor_bpp,
+		line_time_us = display_cfg->stream_descriptors[display_cfg->plane_descriptors[k].stream_index].timing.h_total /
+			((double)display_cfg->stream_descriptors[display_cfg->plane_descriptors[k].stream_index].timing.pixel_clock_khz / 1000);
+		if (display_cfg->plane_descriptors[k].cursor.num_cursors > 0) {
+			calculate_cursor_req_attributes(
+				display_cfg->plane_descriptors[k].cursor.cursor_width,
+				display_cfg->plane_descriptors[k].cursor.cursor_bpp,
 
-			// output
-			&s->cursor_lines_per_chunk[k],
-			&s->cursor_bytes_per_line[k],
-			&s->cursor_bytes_per_chunk[k],
-			&s->cursor_bytes[k]);
-
-		line_time_us = display_cfg->stream_descriptors[display_cfg->plane_descriptors[k].stream_index].timing.h_total / ((double)display_cfg->stream_descriptors[display_cfg->plane_descriptors[k].stream_index].timing.pixel_clock_khz / 1000);
-
-		calculate_cursor_urgent_burst_factor(
-			mode_lib->ip.cursor_buffer_size,
-			display_cfg->plane_descriptors[k].cursor.cursor_width,
-			s->cursor_bytes_per_chunk[k],
-			s->cursor_lines_per_chunk[k],
-			line_time_us,
-			mode_lib->mp.UrgentLatency,
+				// output
+				&s->cursor_lines_per_chunk[k],
+				&s->cursor_bytes_per_line[k],
+				&s->cursor_bytes_per_chunk[k],
+				&s->cursor_bytes[k]);
+
+			calculate_cursor_urgent_burst_factor(
+				mode_lib->ip.cursor_buffer_size,
+				display_cfg->plane_descriptors[k].cursor.cursor_width,
+				s->cursor_bytes_per_chunk[k],
+				s->cursor_lines_per_chunk[k],
+				line_time_us,
+				mode_lib->mp.UrgentLatency,
 
-			// output
-			&mode_lib->mp.UrgentBurstFactorCursor[k],
-			&cursor_not_enough_urgent_latency_hiding);
+				// output
+				&mode_lib->mp.UrgentBurstFactorCursor[k],
+				&cursor_not_enough_urgent_latency_hiding);
+		}
 		mode_lib->mp.UrgentBurstFactorCursorPre[k] = mode_lib->mp.UrgentBurstFactorCursor[k];
 
 		CalculateUrgentBurstFactor(
-- 
2.43.0




[Index of Archives]     [Linux DRI Users]     [Linux Intel Graphics]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux