On Mon, Sep 23, 2024 at 07:53:57PM +0200, Marek Vasut wrote: > On 9/23/24 3:57 PM, Lukasz Majewski wrote: > > Up till now the fsl,lcdif.yaml was requiring the "port" property as a > > must have to specify the display interface on iMX devices. > > > > However, it shall also be possible to specify the display only with > > passing its timing parameters (h* and v* ones) via "display" property: > > (as in > > Documentation/devicetree/bindings/display/panel/display-timings.yaml). > > Timings should go into panel node, not into scanout engine node. > > See e.g. panel-timings in arch/arm64/boot/dts/freescale/imx8mm-phg.dts , in > your case the compatible might be "panel-dpi" . I agree, but if this is already in use, we should allow it. We can mark it deprecated though. Rob
