Hi,
On Mon, Sep 23, 2024 at 5:33 AM Tejas Vipin <tejasvipin76@xxxxxxxxx> wrote:
>
> -static int kd35t133_init_sequence(struct kd35t133 *ctx)
> +static void kd35t133_init_sequence(struct mipi_dsi_multi_context *dsi_ctx)
> {
> - struct mipi_dsi_device *dsi = to_mipi_dsi_device(ctx->dev);
> - struct device *dev = ctx->dev;
> -
> /*
> * Init sequence was supplied by the panel vendor with minimal
> * documentation.
> */
> - mipi_dsi_dcs_write_seq(dsi, KD35T133_CMD_POSITIVEGAMMA,
> - 0x00, 0x13, 0x18, 0x04, 0x0f, 0x06, 0x3a, 0x56,
> - 0x4d, 0x03, 0x0a, 0x06, 0x30, 0x3e, 0x0f);
> - mipi_dsi_dcs_write_seq(dsi, KD35T133_CMD_NEGATIVEGAMMA,
> - 0x00, 0x13, 0x18, 0x01, 0x11, 0x06, 0x38, 0x34,
> - 0x4d, 0x06, 0x0d, 0x0b, 0x31, 0x37, 0x0f);
> - mipi_dsi_dcs_write_seq(dsi, KD35T133_CMD_POWERCONTROL1, 0x18, 0x17);
> - mipi_dsi_dcs_write_seq(dsi, KD35T133_CMD_POWERCONTROL2, 0x41);
> - mipi_dsi_dcs_write_seq(dsi, KD35T133_CMD_VCOMCONTROL, 0x00, 0x1a, 0x80);
> - mipi_dsi_dcs_write_seq(dsi, MIPI_DCS_SET_ADDRESS_MODE, 0x48);
> - mipi_dsi_dcs_write_seq(dsi, MIPI_DCS_SET_PIXEL_FORMAT, 0x55);
> - mipi_dsi_dcs_write_seq(dsi, KD35T133_CMD_INTERFACEMODECTRL, 0x00);
> - mipi_dsi_dcs_write_seq(dsi, KD35T133_CMD_FRAMERATECTRL, 0xa0);
> - mipi_dsi_dcs_write_seq(dsi, KD35T133_CMD_DISPLAYINVERSIONCTRL, 0x02);
> - mipi_dsi_dcs_write_seq(dsi, KD35T133_CMD_DISPLAYFUNCTIONCTRL,
> - 0x20, 0x02);
> - mipi_dsi_dcs_write_seq(dsi, KD35T133_CMD_SETIMAGEFUNCTION, 0x00);
> - mipi_dsi_dcs_write_seq(dsi, KD35T133_CMD_ADJUSTCONTROL3,
> - 0xa9, 0x51, 0x2c, 0x82);
> - mipi_dsi_dcs_write(dsi, MIPI_DCS_ENTER_INVERT_MODE, NULL, 0);
> -
> - dev_dbg(dev, "Panel init sequence done\n");
> - return 0;
> + mipi_dsi_dcs_write_seq_multi(dsi_ctx, KD35T133_CMD_POSITIVEGAMMA,
> + 0x00, 0x13, 0x18, 0x04, 0x0f, 0x06, 0x3a, 0x56,
> + 0x4d, 0x03, 0x0a, 0x06, 0x30, 0x3e, 0x0f);
> + mipi_dsi_dcs_write_seq_multi(dsi_ctx, KD35T133_CMD_NEGATIVEGAMMA,
> + 0x13, 0x18, 0x01, 0x11, 0x06, 0x38, 0x34,
> + 0x06, 0x0d, 0x0b, 0x31, 0x37, 0x0f);
It seems like you dropped a few bytes in the above. Was this
intentional? You seem to have dropped the first byte from both of the
continuation lines (0x00 from the first, 0x4d from the second).
> + mipi_dsi_dcs_write_seq_multi(dsi_ctx, KD35T133_CMD_POWERCONTROL1, 0x18, 0x17);
> + mipi_dsi_dcs_write_seq_multi(dsi_ctx, KD35T133_CMD_POWERCONTROL2, 0x41);
> + mipi_dsi_dcs_write_seq_multi(dsi_ctx, KD35T133_CMD_VCOMCONTROL, 0x00, 0x1a, 0x80);
> + mipi_dsi_dcs_write_seq_multi(dsi_ctx, MIPI_DCS_SET_ADDRESS_MODE, 0x48);
> + mipi_dsi_dcs_write_seq_multi(dsi_ctx, MIPI_DCS_SET_PIXEL_FORMAT, 0x55);
> + mipi_dsi_dcs_write_seq_multi(dsi_ctx, KD35T133_CMD_INTERFACEMODECTRL, 0x00);
> + mipi_dsi_dcs_write_seq_multi(dsi_ctx, KD35T133_CMD_FRAMERATECTRL, 0xa0);
> + mipi_dsi_dcs_write_seq_multi(dsi_ctx, KD35T133_CMD_DISPLAYINVERSIONCTRL, 0x02);
> + mipi_dsi_dcs_write_seq_multi(dsi_ctx, KD35T133_CMD_DISPLAYFUNCTIONCTRL,
> + 0x02);
This used to be the bytes 0x20, 0x02. Now it's just 0x02?
> + mipi_dsi_dcs_write_seq_multi(dsi_ctx, KD35T133_CMD_SETIMAGEFUNCTION, 0x00);
> + mipi_dsi_dcs_write_seq_multi(dsi_ctx, KD35T133_CMD_ADJUSTCONTROL3,
> + 0x51, 0x2c, 0x82);
This used to be the bytes 0xa9, 0x51, 0x2c, 0x82. Now it's just 0x51,
0x2c, 0x82?
> + mipi_dsi_dcs_write_buffer_multi(dsi_ctx, NULL, 0);
Are you certain that the above is equivalent to the old
"mipi_dsi_dcs_write(dsi, MIPI_DCS_ENTER_INVERT_MODE, NULL, 0);" ?
Where is the "MIPI_DCS_ENTER_INVERT_MODE" constant?
I think the above needs to be:
mipi_dsi_dcs_write_seq_multi(dsi_ctx, MIPI_DCS_ENTER_INVERT_MODE);
I've confirmed that this compiles OK and that there's no need to
actually have any bytes in the sequence.
-Doug
