On 9/24/2024 5:46 PM, Dmitry Baryshkov wrote:
On Tue, Sep 24, 2024 at 04:42:02PM GMT, Mahadevan P wrote:On 9/12/2024 1:34 PM, Dmitry Baryshkov wrote:On Thu, Sep 12, 2024 at 12:44:36PM GMT, Mahadevan wrote:Add definitions for the display hardware used on the Qualcomm SA8775P platform. Signed-off-by: Mahadevan <quic_mahap@xxxxxxxxxxx> --- .../msm/disp/dpu1/catalog/dpu_8_4_sa8775p.h | 485 ++++++++++++++++++ .../gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c | 3 +- .../gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h | 3 +- drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c | 3 +- 4 files changed, 491 insertions(+), 3 deletions(-) create mode 100644 drivers/gpu/drm/msm/disp/dpu1/catalog/dpu_8_4_sa8775p.h[...]+static const struct dpu_intf_cfg sa8775p_intf[] = { + { + .name = "intf_0", .id = INTF_0, + .base = 0x34000, .len = 0x280, + .features = INTF_SC7280_MASK, + .type = INTF_DP, + .controller_id = MSM_DP_CONTROLLER_0, + .prog_fetch_lines_worst_case = 24, + .intr_underrun = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR, 24), + .intr_vsync = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR, 25), + }, { + .name = "intf_1", .id = INTF_1, + .base = 0x35000, .len = 0x300, + .features = INTF_SC7280_MASK, + .type = INTF_DSI, + .controller_id = MSM_DSI_CONTROLLER_0, + .prog_fetch_lines_worst_case = 24, + .intr_underrun = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR, 26), + .intr_vsync = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR, 27), + .intr_tear_rd_ptr = DPU_IRQ_IDX(MDP_INTF1_TEAR_INTR, 2), + }, { + .name = "intf_2", .id = INTF_2, + .base = 0x36000, .len = 0x300, + .features = INTF_SC7280_MASK, + .type = INTF_DSI, + .controller_id = MSM_DSI_CONTROLLER_1, + .prog_fetch_lines_worst_case = 24, + .intr_underrun = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR, 28), + .intr_vsync = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR, 29), + .intr_tear_rd_ptr = DPU_IRQ_IDX(MDP_INTF2_TEAR_INTR, 2), + }, { + .name = "intf_3", .id = INTF_3, + .base = 0x37000, .len = 0x280, + .features = INTF_SC7280_MASK, + .type = INTF_NONE, + .controller_id = MSM_DP_CONTROLLER_0, /* pair with intf_0 for DP MST */ + .prog_fetch_lines_worst_case = 24, + .intr_underrun = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR, 30), + .intr_vsync = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR, 31), + }, { + .name = "intf_4", .id = INTF_4, + .base = 0x38000, .len = 0x280, + .features = INTF_SC7280_MASK, + .type = INTF_DP, + .controller_id = MSM_DP_CONTROLLER_1, + .prog_fetch_lines_worst_case = 24, + .intr_underrun = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR, 20), + .intr_vsync = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR, 21), + }, {Where is intf_5 ?intf_5 of base address 0x39000 is not supported on this target.Not supported by whom?
In sa8775p mdss architecture intf_5 is not present. So we are not adding in SW too.
+ .name = "intf_6", .id = INTF_6, + .base = 0x3A000, .len = 0x280, + .features = INTF_SC7280_MASK, + .type = INTF_NONE, + .controller_id = MSM_DP_CONTROLLER_0, /* pair with intf_0 for DP MST */ + .prog_fetch_lines_worst_case = 24, + .intr_underrun = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR, 17), + .intr_vsync = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR, 16), + }, {[skipped]@@ -1464,6 +1464,7 @@ static const struct of_device_id dpu_dt_match[] = { { .compatible = "qcom,sm8250-dpu", .data = &dpu_sm8250_cfg, }, { .compatible = "qcom,sm8350-dpu", .data = &dpu_sm8350_cfg, }, { .compatible = "qcom,sm8450-dpu", .data = &dpu_sm8450_cfg, }, + { .compatible = "qcom,sa8775p-dpu", .data = &dpu_sa8775p_cfg, },Wrong sorting orderSure will move below sm8650-dpu.What makes you think that in a dictionary sa8775p comes after sm8650?
Will update according to alphabetical order in next patch.
{ .compatible = "qcom,sm8550-dpu", .data = &dpu_sm8550_cfg, }, { .compatible = "qcom,sm8650-dpu", .data = &dpu_sm8650_cfg, }, { .compatible = "qcom,x1e80100-dpu", .data = &dpu_x1e80100_cfg, }, -- 2.34.1
