On 9/12/2024 1:26 PM, Dmitry Baryshkov wrote:
On Thu, Sep 12, 2024 at 12:44:32PM GMT, Mahadevan wrote:
Add support for mdss and dpu driver on Qualcomm SA8775P platform.
---
This series depends on following series:
https://lore.kernel.org/all/20240816-sa8775p-mm-v3-v1-0-77d53c3c0cef@xxxxxxxxxxx/
As such, it probably can not be merged before 6.14 (the mentioned series
will go on 6.13, we usually don't do cross-tree merges into drm). Please
rework the bindings to drop the dependency (it is possible, use fake
nodes instead of using dispcc + ID). Then you can specify that only the
DTS patch depends on the dispcc support, allowing driver changes to go
in first.
Can we use clocks = <&dummy_dispcc 0>, <&dummy_dispcc 1>,
<&dummy_dispcc 2>; instead of clocks = <&dispcc0
MDSS_DISP_CC_MDSS_AHB_CLK>, <&dispcc0 MDSS_DISP_CC_MDSS_MDP_LUT_CLK>,
<&dispcc0 MDSS_DISP_CC_MDSS_MDP_CLK>; in dt bindings?
---
Mahadevan (5):
dt-bindings: display/msm: Document MDSS on SA8775P
dt-bindings: display/msm: Document the DPU for SA8775P
drm/msm: mdss: Add SA8775P support
drm/msm/dpu: Add SA8775P support
arm64: dts: qcom: sa8775p: add display dt nodes
.../display/msm/qcom,sa8775p-dpu.yaml | 120 +++++
.../display/msm/qcom,sa8775p-mdss.yaml | 225 ++++++++
arch/arm64/boot/dts/qcom/sa8775p.dtsi | 85 +++
.../msm/disp/dpu1/catalog/dpu_8_4_sa8775p.h | 485 ++++++++++++++++++
.../gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c | 3 +-
.../gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h | 3 +-
drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c | 3 +-
drivers/gpu/drm/msm/msm_mdss.c | 10 +
8 files changed, 931 insertions(+), 3 deletions(-)
create mode 100644 Documentation/devicetree/bindings/display/msm/qcom,sa8775p-dpu.yaml
create mode 100644 Documentation/devicetree/bindings/display/msm/qcom,sa8775p-mdss.yaml
create mode 100644 drivers/gpu/drm/msm/disp/dpu1/catalog/dpu_8_4_sa8775p.h
--
2.34.1
