When using type-c to type-c to connect to the monitor,
the sound plays normally. If you unplug the type-c and
connect the type-c to hdmi dongle to the monitor, there will be noise.
By capturing the audio data, it is found that
the data position is messy, and there is no error in the data.
Through experiments, it can be restored by resetting the SDP path
when unplugging it.
Signed-off-by: Liankun Yang <liankun.yang@xxxxxxxxxxxx>
---
drivers/gpu/drm/mediatek/mtk_dp.c | 15 +++++++++++++++
1 file changed, 15 insertions(+)
diff --git a/drivers/gpu/drm/mediatek/mtk_dp.c b/drivers/gpu/drm/mediatek/mtk_dp.c
index d8796a904eca..4003bd83f64e 100644
--- a/drivers/gpu/drm/mediatek/mtk_dp.c
+++ b/drivers/gpu/drm/mediatek/mtk_dp.c
@@ -1052,6 +1052,18 @@ static void mtk_dp_digital_sw_reset(struct mtk_dp *mtk_dp)
0, DP_TX_TRANSMITTER_4P_RESET_SW_DP_TRANS_P0);
}
+static void mtk_dp_sdp_path_reset(struct mtk_dp *mtk_dp)
+{
+ mtk_dp_update_bits(mtk_dp, MTK_DP_ENC0_P0_3004,
+ SDP_RESET_SW_DP_ENC0_P0,
+ SDP_RESET_SW_DP_ENC0_P0);
+
+ /* Wait for sdp path reset to complete */
+ usleep_range(1000, 5000);
+ mtk_dp_update_bits(mtk_dp, MTK_DP_ENC0_P0_3004,
+ 0, SDP_RESET_SW_DP_ENC0_P0);
+}
+
static void mtk_dp_set_lanes(struct mtk_dp *mtk_dp, int lanes)
{
mtk_dp_update_bits(mtk_dp, MTK_DP_TRANS_P0_35F0,
@@ -2314,6 +2326,9 @@ static void mtk_dp_bridge_atomic_disable(struct drm_bridge *bridge,
DP_PWR_STATE_BANDGAP_TPLL,
DP_PWR_STATE_MASK);
+ /* SDP path reset sw*/
+ mtk_dp_sdp_path_reset(mtk_dp);
+
/* Ensure the sink is muted */
msleep(20);
}
--
2.45.2
