On Sun, 8 Sep 2024 14:54:57 +0000, Jonas Karlman wrote:
> This prepares and enable use of HDMI2.0 modes, e.g. 4K@60Hz, on RK3228,
> RK3328, RK3399 and RK356x. Support for 10-bit and/or YUV output modes is
> not part of this series.
>
> Patch 1 add hdmiphy rate validation in mode_valid so that HDMI2.0 modes
> can be enabled on RK3228 and RK3328.
>
> [...]
Applied, thanks!
[1/7] drm/rockchip: dw_hdmi: Filter modes based on hdmiphy_clk
commit: 3303a206ae7474b2f8a5d17d8df9de08bac16ca5
[2/7] drm/rockchip: dw_hdmi: Adjust cklvl & txlvl for RF/EMI
commit: 6e94e2871eb706a17692acf7ef85ecf2789f6433
[3/7] drm/rockchip: dw_hdmi: Add phy_config for 594Mhz pixel clock
commit: b60c86d305f46483d3ed0743e9ec97a76addcabc
[4/7] drm/rockchip: dw_hdmi: Set cur_ctr to 0 always
commit: 7d324630f3515bd6e11cadeb1d748bd74ecc9664
[5/7] drm/rockchip: dw_hdmi: Use auto-generated tables
commit: 7595c7ef17ffe70d0f4fdda01f87f105a12de66b
[6/7] drm/rockchip: dw_hdmi: Enable 4K@60Hz mode on RK3399 and RK356x
commit: 28f0ae48e7fdbd6cdcf3972c8d8686a529ae1ede
[7/7] drm/rockchip: Load crtc devices in preferred order
commit: 0c4558a1bc2df9b6e6fb311de9cab192b0943426
Best regards,
--
Heiko Stuebner <heiko@xxxxxxxxx>
