Correctly spelled comments make it easier for the reader to understand
the code.
Replace 'maxium' with 'maximum' in the comment &
replace 'diffculty' with 'difficulty' in the comment &
replace 'suppluy' with 'supply' in the comment &
replace 'Congiuration' with 'Configuration' in the comment &
replace 'eanbled' with 'enabled' in the comment.
Signed-off-by: Yan Zhen <yanzhen@xxxxxxxx>
---
drivers/gpu/drm/amd/display/dc/basics/dce_calcs.c | 2 +-
drivers/gpu/drm/amd/display/dc/dml2/display_mode_core.c | 6 +++---
drivers/gpu/drm/amd/display/dc/hwss/dcn30/dcn30_hwseq.c | 2 +-
3 files changed, 5 insertions(+), 5 deletions(-)
diff --git a/drivers/gpu/drm/amd/display/dc/basics/dce_calcs.c b/drivers/gpu/drm/amd/display/dc/basics/dce_calcs.c
index e47e9db062f4..d70a3549e05a 100644
--- a/drivers/gpu/drm/amd/display/dc/basics/dce_calcs.c
+++ b/drivers/gpu/drm/amd/display/dc/basics/dce_calcs.c
@@ -569,7 +569,7 @@ static void calculate_bandwidth(
break;
}
data->lb_partitions[i] = bw_floor2(bw_div(data->lb_size_per_component[i], data->lb_line_pitch), bw_int_to_fixed(1));
- /*clamp the partitions to the maxium number supported by the lb*/
+ /* clamp the partitions to the maximum number supported by the lb */
if ((surface_type[i] != bw_def_graphics || dceip->graphics_lb_nodownscaling_multi_line_prefetching == 1)) {
data->lb_partitions_max[i] = bw_int_to_fixed(10);
}
diff --git a/drivers/gpu/drm/amd/display/dc/dml2/display_mode_core.c b/drivers/gpu/drm/amd/display/dc/dml2/display_mode_core.c
index 547dfcc80fde..d851c081e376 100644
--- a/drivers/gpu/drm/amd/display/dc/dml2/display_mode_core.c
+++ b/drivers/gpu/drm/amd/display/dc/dml2/display_mode_core.c
@@ -8926,7 +8926,7 @@ void dml_core_mode_programming(struct display_mode_lib_st *mode_lib, const struc
// The prefetch scheduling should only be calculated once as per AllowForPStateChangeOrStutterInVBlank requirement
// If the AllowForPStateChangeOrStutterInVBlank requirement is not strict (i.e. only try those power saving feature
- // if possible, then will try to program for the best power saving features in order of diffculty (dram, fclk, stutter)
+ // if possible, then will try to program for the best power saving features in order of difficulty (dram, fclk, stutter)
s->iteration = 0;
s->MaxTotalRDBandwidth = 0;
s->AllPrefetchModeTested = false;
@@ -9977,7 +9977,7 @@ void dml_core_get_row_heights(
dml_print("DML_DLG: %s: GPUVMMinPageSizeKBytes = %u\n", __func__, GPUVMMinPageSizeKBytes);
#endif
- // just suppluy with enough parameters to calculate meta and dte
+ // just supply with enough parameters to calculate meta and dte
CalculateVMAndRowBytes(
0, // dml_bool_t ViewportStationary,
1, // dml_bool_t DCCEnable,
@@ -10110,7 +10110,7 @@ dml_bool_t dml_mode_support(
/// Note: In this function, it is assumed that DCFCLK, SOCCLK freq are the state values, and mode_program will just use the DML calculated DPPCLK and DISPCLK
/// @param mode_lib mode_lib data struct that house all the input/output/bbox and calculation values.
/// @param state_idx Power state idx chosen
-/// @param display_cfg Display Congiuration
+/// @param display_cfg Display Configuration
/// @param call_standalone Calling mode_programming without calling mode support. Some of the "support" struct member will be pre-calculated before doing mode programming
/// TODO: Add clk_cfg input, could be useful for standalone mode
dml_bool_t dml_mode_programming(
diff --git a/drivers/gpu/drm/amd/display/dc/hwss/dcn30/dcn30_hwseq.c b/drivers/gpu/drm/amd/display/dc/hwss/dcn30/dcn30_hwseq.c
index 42c52284a868..355823530aa4 100644
--- a/drivers/gpu/drm/amd/display/dc/hwss/dcn30/dcn30_hwseq.c
+++ b/drivers/gpu/drm/amd/display/dc/hwss/dcn30/dcn30_hwseq.c
@@ -455,7 +455,7 @@ bool dcn30_mmhubbub_warmup(
struct mcif_wb *mcif_wb;
struct mcif_warmup_params warmup_params = {0};
unsigned int i, i_buf;
- /*make sure there is no active DWB eanbled */
+ /* make sure there is no active DWB enabled */
for (i = 0; i < num_dwb; i++) {
dwb = dc->res_pool->dwbc[wb_info[i].dwb_pipe_inst];
if (dwb->dwb_is_efc_transition || dwb->dwb_is_drc) {
--
2.34.1
