Re: [PATCH 1/5] dt-bindings: display/msm: Document MDSS on SA8775P

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, Sep 12, 2024 at 12:44:33PM GMT, Mahadevan wrote:
> Document the MDSS hardware found on the Qualcomm SA8775P platform.
> 
> Signed-off-by: Mahadevan <quic_mahap@xxxxxxxxxxx>

I don't think this was tested before submission. I observe obvious
issues which should have been reported while testing dt bindings.
I will not point those, letting you discover, identify and fix them.

Nevertheless,

> +examples:
> +  - |
> +    #include <dt-bindings/clock/qcom,sa8775p-dispcc.h>
> +    #include <dt-bindings/clock/qcom,gcc-sa8775p.h>
> +    #include <dt-bindings/clock/qcom,rpmh.h>
> +    #include <dt-bindings/interrupt-controller/arm-gic.h>
> +    #include <dt-bindings/interconnect/qcom,sa8775p.h>
> +    #include <dt-bindings/power/qcom,rpmhpd.h>
> +
> +    mdss0: display-subsystem@ae00000 {

Drop unused label

> +        compatible = "qcom,sa8775p-mdss";
> +        reg = <0 0x0ae00000 0 0x1000>;
> +        reg-names = "mdss";
> +
> +        /* same path used twice */
> +        interconnects = <&mmss_noc MASTER_MDP0 0 &mc_virt SLAVE_EBI1 0>,
> +                        <&mmss_noc MASTER_MDP1 0 &mc_virt SLAVE_EBI1 0>,
> +                        <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
> +                        &config_noc SLAVE_DISPLAY_CFG QCOM_ICC_TAG_ACTIVE_ONLY>;
> +        interconnect-names = "mdp0-mem",
> +                             "mdp1-mem",
> +                             "cpu-cfg";

Missing reset.

> +
> +        power-domains = <&dispcc0 MDSS_DISP_CC_MDSS_CORE_GDSC>;
> +
> +        clocks = <&dispcc0 MDSS_DISP_CC_MDSS_AHB_CLK>,
> +                 <&gcc GCC_DISP_HF_AXI_CLK>,
> +                 <&dispcc0 MDSS_DISP_CC_MDSS_MDP_CLK>;
> +
> +        interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
> +        interrupt-controller;
> +        #interrupt-cells = <1>;
> +
> +        iommus = <&apps_smmu 0x1000 0x402>;
> +
> +        #address-cells = <2>;
> +        #size-cells = <2>;
> +        ranges;
> +
> +        status = "disabled";

Drop

> +
> +        mdss_mdp: display-controller@ae01000 {
> +            compatible = "qcom,sa8775p-dpu";
> +            reg = <0 0x0ae01000 0 0x8f000>,
> +                  <0 0x0aeb0000 0 0x2008>;
> +            reg-names = "mdp", "vbif";
> +
> +            clocks = <&gcc GCC_DISP_HF_AXI_CLK>,
> +                     <&dispcc0 MDSS_DISP_CC_MDSS_AHB_CLK>,
> +                     <&dispcc0 MDSS_DISP_CC_MDSS_MDP_LUT_CLK>,
> +                     <&dispcc0 MDSS_DISP_CC_MDSS_MDP_CLK>,
> +                     <&dispcc0 MDSS_DISP_CC_MDSS_VSYNC_CLK>;
> +            clock-names = "bus",
> +                          "iface",
> +                          "lut",
> +                          "core",
> +                          "vsync";
> +
> +            assigned-clocks = <&dispcc0 MDSS_DISP_CC_MDSS_VSYNC_CLK>;
> +            assigned-clock-rates = <19200000>;

empty line

> +            operating-points-v2 = <&mdss0_mdp_opp_table>;
> +            power-domains = <&rpmhpd RPMHPD_MMCX>;
> +
> +            interrupt-parent = <&mdss0>;
> +            interrupts = <0>;

empty line

> +            ports {
> +                #address-cells = <1>;
> +                #size-cells = <0>;

empty line

> +                port@0 {
> +                    reg = <0>;
> +                    dpu_intf0_out: endpoint {
> +                         remote-endpoint = <&mdss0_dp0_in>;
> +                    };
> +                };
> +            };
> +
> +            mdss0_mdp_opp_table: opp-table {
> +                compatible = "operating-points-v2";
> +
> +                opp-375000000 {
> +                    opp-hz = /bits/ 64 <375000000>;
> +                    required-opps = <&rpmhpd_opp_svs_l1>;
> +                };
> +
> +                opp-500000000 {
> +                    opp-hz = /bits/ 64 <500000000>;
> +                    required-opps = <&rpmhpd_opp_nom>;
> +                };
> +
> +                opp-575000000 {
> +                    opp-hz = /bits/ 64 <575000000>;
> +                    required-opps = <&rpmhpd_opp_turbo>;
> +                };
> +
> +                opp-650000000 {
> +                    opp-hz = /bits/ 64 <650000000>;
> +                    required-opps = <&rpmhpd_opp_turbo_l1>;
> +                };
> +            };
> +        };
> +
> +        mdss0_dp0: displayport-controller@af54000 {

Drop unused label

> +            compatible = "qcom,sa8775p-dp";
> +
> +            pinctrl-0 = <&dp_hot_plug_det>;
> +            pinctrl-names = "default";
> +
> +            reg = <0 0xaf54000 0 0x104>,
> +                <0 0xaf54200 0 0x0c0>,
> +                <0 0xaf55000 0 0x770>,
> +                <0 0xaf56000 0 0x09c>;

Wrong identation (here and afterwards).
Missing p1 block

> +
> +            interrupt-parent = <&mdss0>;
> +            interrupts = <12>;
> +            clocks = <&dispcc0 MDSS_DISP_CC_MDSS_AHB_CLK>,
> +                <&dispcc0 MDSS_DISP_CC_MDSS_DPTX0_AUX_CLK>,
> +                <&dispcc0 MDSS_DISP_CC_MDSS_DPTX0_LINK_CLK>,
> +                <&dispcc0 MDSS_DISP_CC_MDSS_DPTX0_LINK_INTF_CLK>,
> +                <&dispcc0 MDSS_DISP_CC_MDSS_DPTX0_PIXEL0_CLK>;
> +            clock-names = "core_iface",
> +                "core_aux",
> +                "ctrl_link",
> +                "ctrl_link_iface",
> +                "stream_pixel";
> +            assigned-clocks = <&dispcc0 MDSS_DISP_CC_MDSS_DPTX0_LINK_CLK_SRC>,
> +                 <&dispcc0 MDSS_DISP_CC_MDSS_DPTX0_PIXEL0_CLK_SRC>;
> +            assigned-clock-parents = <&mdss0_edp_phy 0>, <&mdss0_edp_phy 1>;
> +            phys = <&mdss0_edp_phy>;
> +            phy-names = "dp";
> +            operating-points-v2 = <&dp_opp_table>;
> +            power-domains = <&rpmhpd SA8775P_MMCX>;
> +            #sound-dai-cells = <0>;
> +            status = "disabled";

Drop

> +            ports {
> +                #address-cells = <1>;
> +                #size-cells = <0>;
> +                port@0 {
> +                    reg = <0>;
> +                    mdss0_dp0_in: endpoint {
> +                        remote-endpoint = <&dpu_intf0_out>;
> +                    };
> +                };
> +                port@1 {
> +                   reg = <1>;
> +                   mdss0_dp_out: endpoint { };
> +                };
> +            };
> +            dp_opp_table: opp-table {
> +                compatible = "operating-points-v2";
> +                opp-160000000 {
> +                    opp-hz = /bits/ 64 <160000000>;
> +                    required-opps = <&rpmhpd_opp_low_svs>;
> +                };
> +                opp-270000000 {
> +                     opp-hz = /bits/ 64 <270000000>;
> +                     required-opps = <&rpmhpd_opp_svs>;
> +                };
> +
> +                opp-540000000 {
> +                    opp-hz = /bits/ 64 <540000000>;
> +                    required-opps = <&rpmhpd_opp_svs_l1>;
> +                };
> +                opp-810000000 {
> +                    opp-hz = /bits/ 64 <810000000>;
> +                    required-opps = <&rpmhpd_opp_nom>;
> +                };
> +            };
> +
> +    };
> +...
> -- 
> 2.34.1
> 

-- 
With best wishes
Dmitry



[Index of Archives]     [Linux DRI Users]     [Linux Intel Graphics]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux