On 08/09/2024 15:28, Jonas Karlman wrote:
The scrambler feature can be left enabled when hotplugging from a sink
and mode that require scrambling to a sink that does not support SCDC or
scrambling.
Typically a blank screen or 'no signal' message can be observed after
using a HDMI 2.0 4K@60Hz mode and then hotplugging to a sink that only
support HDMI 1.4.
Fix this by disabling the scrambler feature when SCDC is not supported.
Fixes: 264fce6cc2c1 ("drm/bridge: dw-hdmi: Add SCDC and TMDS Scrambling support")
Reported-by: Christopher Obbard <chris.obbard@xxxxxxxxxxxxx>
Signed-off-by: Jonas Karlman <jonas@xxxxxxxxx>
---
v2: New patch
---
drivers/gpu/drm/bridge/synopsys/dw-hdmi.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
index 0031f3c54882..9e7f86a0bf5c 100644
--- a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
+++ b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
@@ -2117,6 +2117,8 @@ static void hdmi_av_composer(struct dw_hdmi *hdmi,
HDMI_MC_SWRSTZ);
drm_scdc_set_scrambling(hdmi->curr_conn, 0);
}
+ } else if (hdmi->version >= 0x200a) {
+ hdmi_writeb(hdmi, 0, HDMI_FC_SCRAMBLER_CTRL);
}
/* Set up horizontal active pixel width */
Reviewed-by: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
