On 03/09/2024 10:40, Simona Vetter wrote:
On Mon, Sep 02, 2024 at 03:31:28PM +0300, Tomi Valkeinen wrote:
Hi,
On 02/09/2024 13:50, Daniel Vetter wrote:
On Mon, Sep 02, 2024 at 11:26:11AM +0200, Maxime Ripard wrote:
Hi,
On Wed, Aug 07, 2024 at 03:19:23PM GMT, Tomi Valkeinen wrote:
On 25/07/2024 14:28, Maxime Ripard wrote:
On Mon, Jul 15, 2024 at 11:32:34AM GMT, Tomi Valkeinen wrote:
On 02/07/2024 14:43, Maxime Ripard wrote:
Hi Tomi,
On Wed, Jun 26, 2024 at 06:53:40PM GMT, Tomi Valkeinen wrote:
On 26/06/2024 18:07, Maxime Ripard wrote:
On Wed, Jun 26, 2024 at 12:55:39PM GMT, Tomi Valkeinen wrote:
On 26/06/2024 11:49, Maxime Ripard wrote:
Hi,
On Wed, Jun 19, 2024 at 12:07:48PM GMT, Tomi Valkeinen wrote:
From: Tomi Valkeinen <tomi.valkeinen+renesas@xxxxxxxxxxxxxxxx>
When a bridge driver uses devm_mipi_dsi_device_register_full() or
devm_mipi_dsi_attach(), the resource management is moved to devres,
which releases the resource automatically when the bridge driver is
unbound.
However, if the DSI host goes away first, the host unregistration code
will automatically detach and unregister any DSI peripherals, without
notifying the devres about it. So when the bridge driver later is
unbound, the resources are released a second time, leading to crash.
That's super surprising. mipi_dsi_device_unregister calls
device_unregister, which calls device_del, which in turn calls
devres_release_all.
Hmm, right.
If that doesn't work like that, then it's what needs to be fixed, and
not worked around in the MIPI-DSI bus.
Well, something causes a crash for both the device register/unregister case
and the attach/detach case, and the call stacks and debug prints showed a
double unregister/detach...
I need to dig up the board and check again why the devres_release_all() in
device_del() doesn't solve this. But I can probably only get back to this in
August, so it's perhaps best to ignore this patch for now.
However, the attach/detach case is still valid? I see no devres calls in the
detach paths.
I'm not sure what you mean by the attach/detach case. Do you expect
device resources allocated in attach to be freed when detach run?
Ah, never mind, the devres_release_all() would of course deal with that too.
However, I just realized/remembered why it crashes.
devm_mipi_dsi_device_register_full() and devm_mipi_dsi_attach() are given a
device which is used for the devres. This device is probably always the
bridge device. So when the bridge device goes away, so do those resources.
The mipi_dsi_device_unregister() call deals with a DSI device, which was
created in devm_mipi_dsi_device_register_full(). Unregistering that DSI
device, which does happen when the DSI host is removed, does not affect the
devres of the bridge.
So, unloading the DSI host driver causes mipi_dsi_device_unregister() and
mipi_dsi_detach() to be called (as part of mipi_dsi_host_unregister()), and
unloading the bridge driver causes them to be called again via devres.
Sorry, that's one of the things I don't quite get. Both functions are
exclusively(?) called from I2C bridges, so the device passed there
should be a i2c_client instance, and thus the MIPI-DSI host going away
will not remove those i2c devices, only the MIPI-DSI ones, right?
Yes.
So if we remove the host, the MIPI-DSI device will be detached and
removed through the path you were explaing with the i2c client lingering
around. And if we remove the I2C device, then devm will kick in and will
detach and remove the MIPI-DSI device.
Right.
Or is it the other way around? That if you remove the host, the device
is properly detached and removed, but there's still the devm actions
lingering around in the i2c device with pointers to the mipi_dsi_device
that was first created, but since destroyed?
And thus, if the i2c device ever goes away, we get a use-after-free?
Hmm, I'm not sure I understand what you mean here... Aren't you describing
the same thing in both of these cases?
In any case, to expand the description a bit, module unloading is quite
fragile. I do get a crash if I first unload the i2c bridge module, and only
then go and unload the other ones in the DRM pipeline. But I think module
unloading will very easily crash, whatever the DRM drivers being used are,
so it's not related to this particular issue.
In my view, the unload sequence that should be supported (for development
purposes, not for production) is to start the unload from the display
controller module, which tears down the DRM pipeline, and going from there
towards the panels/connectors.
Of course, it would be very nice if the module unloading worked perfectly,
but afaics fixing all that's related to module unloading would be a
multi-year project... So, I just want to keep the sequence I described above
working, which allows using modules while doing driver development.
FTR, I'm all for supporting module unloading. The discussion above was
about what is broken exactly, so we can come up with a good solution.
Does that mean that you're ok with the patch, or that something should be
improved?
No, I meant that at the very least the commit log needs to be updated to
reflect what is actually going on, because at least my understanding of
it doesn't match what actually happens.
We want a solution to the problem you're facing, but it's not clear to
me what the problem is exactly at this point, so it's hard to review a
solution.
So I haven't looked at the full thing, but I think the proper fix is to
make both detach and unregister cope with being called multiple times. I
think devm_ here is a red herring, the underlying issues is that we can
unregister/detach from two sides:
- when the host dsi goes away
- when individual dsi devices on a given host go away
So there needs to be book-keeping and locking to make sure no matter which
order things disappear, we don't try to unregister/detach a dsi device
twice.
I think that is what my patch does (for devm_).
Yep, except I think you should just do it for everyone, not just for the
special case where one of the calls is done through devm.
Some vocabulary first:
dsi peripheral device - The device that represents the DSI peripheral. It is
a bridge or a panel, and (usually) an i2c or platform device.
dsi peripheral driver - The driver handling the dsi peripheral device.
dsi device - Runtime created device instance that represents the DSI
peripheral. So in my case we have the i2c bridge device, and a dsi device is
created for it in the setup code.
dsi controller device - A device that has a DSI bus (usually a platform or
i2c device, I would guess).
dsi controller driver - A driver for the dsi controller device. Creates the
dsi host.
dsi host - represents the DSI host side, owned by the dsi controller driver.
When a dsi peripheral driver uses devm_mipi_dsi_device_register_full() or
devm_mipi_dsi_attach(), the dsi device is created and attached to the dsi
host. When the dsi peripheral device-driver is unbound, devres will call
unregister and detach are called automatically. This works fine.
But when the device-driver for the dsi controller is unbound, the dsi
controller driver will unregister the dsi host, and the unregistration will
also unregister and detach the dsi device. But the devres is not told about
that. So when the dsi peripheral is later unbound, its devres will again
unregister and detach.
To fix that this patch uses devm_remove_action() to remove the devres action
when the host side goes away first.
Now, after writing the above, I realized that all this won't help with the
non-devm versions: the host side has unregistered and detached the dsi
device, but if the dsi peripheral driver calls mipi_dsi_detach() or
mipi_dsi_device_unregister(), it will again crash.
Handling the attach/detach should be quite easy, and in fact the code
already handles it, but it uses WARN_ON() there so that has to go. But
attach/detach will crash anyway if the dsi device has already been freed,
which happens when the dsi controller driver calls
mipi_dsi_device_unregister().
Hm I thought we have a full struct device, so refcounted, and also with
struct device unregister should be separate from the final kfree when the
last reference drops away. Hence I thought this should just work.
We might need to grab a reference in attach/detach to sort this out?
I think there's a bit more to it. A non-dsi-device bridge driver would do:
(devm_)mipi_dsi_device_register_full()
...
(devm_)mipi_dsi_attach()
The DSI host side could unregister and free the dsi_device right after
the call to mipi_dsi_device_register_full(), and mipi_dsi_attach() would
probably just crash.
If I understand this correctly, the main issue is that the bridge driver
doesn't own an exclusive reference to the dsi_device, even if it looks
like it does, but rather both the dsi host and the bridge driver share
the same reference. So, we could get an extra reference, so that each
side has its own.
But I think there's more. The bridge driver will call
mipi_dsi_device_unregister() (manually or via devres), and that does
device_unregister(). However, the dsi host will also call
mipi_dsi_device_unregister() when tearing down, which would result in
another device_unregister().
The above is not a problem if the bridge does away first, as then the
dsi bus won't contain the dsi_device anymore, and the dsi host will not
unregister it. But if it's the other way around, the dsi host will do
device_unregister, and later the bridge will do it too as it thinks it
owns the dsi_device.
I presume that can be solved by tracking whether we have unregistered
the dsi_device or not. However, what would happen if the bridge driver
calls any of the other mipi_dsi_* functions with the dsi_device that has
already been unregistered by the dsi host? Nothing good, probably. So
all those functions should start to fail graciously when the dsi_device
has been unregistered. Or the bridge driver should somehow get a
notification about the unregistration so that it knows not to call those
functions.
I have to say I feel a bit uncertain about the whole ownership model here.
Tomi
