Re: [PATCH v5 08/12] drm/msm/dpu: split dpu_plane_atomic_check()

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 





On 8/28/2024 11:59 AM, Dmitry Baryshkov wrote:
On Wed, 28 Aug 2024 at 21:27, Abhinav Kumar <quic_abhinavk@xxxxxxxxxxx> wrote:



On 6/26/2024 2:46 PM, Dmitry Baryshkov wrote:
Split dpu_plane_atomic_check() function into two pieces:

dpu_plane_atomic_check_nopipe() performing generic checks on the pstate,
without touching the associated pipe,

and

dpu_plane_atomic_check_pipes(), which takes into account used pipes.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
---
   drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c | 178 +++++++++++++++++++-----------
   1 file changed, 112 insertions(+), 66 deletions(-)

diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c
index 115c1bd77bdd..9b9fe28052ad 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c
@@ -788,49 +788,22 @@ static int dpu_plane_atomic_check_pipe(struct dpu_plane *pdpu,
   #define MAX_UPSCALE_RATIO   20
   #define MAX_DOWNSCALE_RATIO 4

-static int dpu_plane_atomic_check(struct drm_plane *plane,
-                               struct drm_atomic_state *state)
+static int dpu_plane_atomic_check_nopipe(struct drm_plane *plane,
+                                      struct drm_plane_state *new_plane_state,
+                                      const struct drm_crtc_state *crtc_state)
   {
-     struct drm_plane_state *new_plane_state = drm_atomic_get_new_plane_state(state,
-                                                                              plane);
       int ret = 0, min_scale, max_scale;
       struct dpu_plane *pdpu = to_dpu_plane(plane);
       struct dpu_kms *kms = _dpu_plane_get_kms(&pdpu->base);
       u64 max_mdp_clk_rate = kms->perf.max_core_clk_rate;
       struct dpu_plane_state *pstate = to_dpu_plane_state(new_plane_state);
-     struct dpu_sw_pipe *pipe = &pstate->pipe;
-     struct dpu_sw_pipe *r_pipe = &pstate->r_pipe;
-     const struct drm_crtc_state *crtc_state = NULL;
-     const struct msm_format *fmt;
       struct dpu_sw_pipe_cfg *pipe_cfg = &pstate->pipe_cfg;
       struct dpu_sw_pipe_cfg *r_pipe_cfg = &pstate->r_pipe_cfg;
       struct drm_rect fb_rect = { 0 };
       uint32_t max_linewidth;
-     unsigned int rotation;
-     uint32_t supported_rotations;
-     const struct dpu_sspp_cfg *pipe_hw_caps;
-     const struct dpu_sspp_sub_blks *sblk;
-
-     if (new_plane_state->crtc)
-             crtc_state = drm_atomic_get_new_crtc_state(state,
-                                                        new_plane_state->crtc);
-
-     pipe->sspp = dpu_rm_get_sspp(&kms->rm, pdpu->pipe);
-     r_pipe->sspp = NULL;

-     if (!pipe->sspp)
-             return -EINVAL;
-
-     pipe_hw_caps = pipe->sspp->cap;
-     sblk = pipe->sspp->cap->sblk;
-
-     if (sblk->scaler_blk.len) {
-             min_scale = FRAC_16_16(1, MAX_UPSCALE_RATIO);
-             max_scale = MAX_DOWNSCALE_RATIO << 16;
-     } else {
-             min_scale = DRM_PLANE_NO_SCALING;
-             max_scale = DRM_PLANE_NO_SCALING;
-     }
+     min_scale = FRAC_16_16(1, MAX_UPSCALE_RATIO);
+     max_scale = MAX_DOWNSCALE_RATIO << 16;

       ret = drm_atomic_helper_check_plane_state(new_plane_state, crtc_state,
                                                 min_scale,
@@ -843,11 +816,6 @@ static int dpu_plane_atomic_check(struct drm_plane *plane,
       if (!new_plane_state->visible)
               return 0;

-     pipe->multirect_index = DPU_SSPP_RECT_SOLO;
-     pipe->multirect_mode = DPU_SSPP_MULTIRECT_NONE;
-     r_pipe->multirect_index = DPU_SSPP_RECT_SOLO;
-     r_pipe->multirect_mode = DPU_SSPP_MULTIRECT_NONE;
-
       pstate->stage = DPU_STAGE_0 + pstate->base.normalized_zpos;
       if (pstate->stage >= pdpu->catalog->caps->max_mixer_blendstages) {
               DPU_ERROR("> %d plane stages assigned\n",
@@ -871,8 +839,6 @@ static int dpu_plane_atomic_check(struct drm_plane *plane,
               return -E2BIG;
       }

-     fmt = msm_framebuffer_format(new_plane_state->fb);
-
       max_linewidth = pdpu->catalog->caps->max_linewidth;

       drm_rect_rotate(&pipe_cfg->src_rect,
@@ -881,6 +847,78 @@ static int dpu_plane_atomic_check(struct drm_plane *plane,

       if ((drm_rect_width(&pipe_cfg->src_rect) > max_linewidth) ||
            _dpu_plane_calc_clk(&crtc_state->adjusted_mode, pipe_cfg) > max_mdp_clk_rate) {
+             if (drm_rect_width(&pipe_cfg->src_rect) > 2 * max_linewidth) {
+                     DPU_DEBUG_PLANE(pdpu, "invalid src " DRM_RECT_FMT " line:%u\n",
+                                     DRM_RECT_ARG(&pipe_cfg->src_rect), max_linewidth);
+                     return -E2BIG;
+             }
+
+             *r_pipe_cfg = *pipe_cfg;
+             pipe_cfg->src_rect.x2 = (pipe_cfg->src_rect.x1 + pipe_cfg->src_rect.x2) >> 1;
+             pipe_cfg->dst_rect.x2 = (pipe_cfg->dst_rect.x1 + pipe_cfg->dst_rect.x2) >> 1;
+             r_pipe_cfg->src_rect.x1 = pipe_cfg->src_rect.x2;
+             r_pipe_cfg->dst_rect.x1 = pipe_cfg->dst_rect.x2;
+     } else {
+             memset(r_pipe_cfg, 0, sizeof(*r_pipe_cfg));
+     }
+

This is the part I am not able to fully understand. Assignment of
r_pipe_cfg is also pipe related so why should that move to
dpu_plane_atomic_check_nopipe(). It should be part of
dpu_plane_atomic_check_pipe().

Because it happens before possible pipe / rectangle allocation. These
values are further used to assign resources.


Are you referring to SSPP allocation which happens in dpu_plane_virtual_assign_resources() later on?

I see your point, but thats why originally I wanted to ask whether this should be called dpu_plane_atomic_check_nosspp() and dpu_plane_atomic_check_sspp() because pipe is kind of assigned either here or already assigned. Its the SSPP which is not.


+     drm_rect_rotate_inv(&pipe_cfg->src_rect,
+                         new_plane_state->fb->width, new_plane_state->fb->height,
+                         new_plane_state->rotation);
+     if (r_pipe_cfg->src_rect.x1 != 0)
+             drm_rect_rotate_inv(&r_pipe_cfg->src_rect,
+                                 new_plane_state->fb->width, new_plane_state->fb->height,
+                                 new_plane_state->rotation);
+
+     pstate->needs_qos_remap = drm_atomic_crtc_needs_modeset(crtc_state);
+
+     return 0;
+}
+
+static int dpu_plane_atomic_check_pipes(struct drm_plane *plane,
+                                     struct drm_atomic_state *state,
+                                     const struct drm_crtc_state *crtc_state)
+{
+     struct drm_plane_state *new_plane_state =
+             drm_atomic_get_new_plane_state(state, plane);
+     struct dpu_plane *pdpu = to_dpu_plane(plane);
+     struct dpu_plane_state *pstate = to_dpu_plane_state(new_plane_state);
+     struct dpu_sw_pipe *pipe = &pstate->pipe;
+     struct dpu_sw_pipe *r_pipe = &pstate->r_pipe;
+     const struct msm_format *fmt;
+     struct dpu_sw_pipe_cfg *pipe_cfg = &pstate->pipe_cfg;
+     struct dpu_sw_pipe_cfg *r_pipe_cfg = &pstate->r_pipe_cfg;
+     uint32_t max_linewidth;
+     unsigned int rotation;
+     uint32_t supported_rotations;
+     const struct dpu_sspp_cfg *pipe_hw_caps;
+     const struct dpu_sspp_sub_blks *sblk;
+     int ret = 0;
+
+     pipe_hw_caps = pipe->sspp->cap;
+     sblk = pipe->sspp->cap->sblk;
+
+     /*
+      * We already have verified scaling against platform limitations.
+      * Now check if the SSPP supports scaling at all.
+      */
+     if (!sblk->scaler_blk.len &&
+         ((drm_rect_width(&new_plane_state->src) >> 16 !=
+           drm_rect_width(&new_plane_state->dst)) ||
+          (drm_rect_height(&new_plane_state->src) >> 16 !=
+           drm_rect_height(&new_plane_state->dst))))
+             return -ERANGE;
+

Should this part be retained under dpu_plane_atomic_check_nopipe()?

This is also not pipe dependent.

No, it uses sblk->scaler_blk, so it depends on the actual SSPP being
used for this pipe.


Ack.


+     fmt = msm_framebuffer_format(new_plane_state->fb);
+
+     max_linewidth = pdpu->catalog->caps->max_linewidth;
+
+     ret = dpu_plane_atomic_check_pipe(pdpu, pipe, pipe_cfg, fmt,
+                                       &crtc_state->adjusted_mode);
+     if (ret)
+             return ret;
+
+     if (drm_rect_width(&r_pipe_cfg->src_rect) != 0) {
               /*
                * In parallel multirect case only the half of the usual width
                * is supported for tiled formats. If we are here, we know that
@@ -894,12 +932,6 @@ static int dpu_plane_atomic_check(struct drm_plane *plane,
                       return -E2BIG;
               }

-             if (drm_rect_width(&pipe_cfg->src_rect) > 2 * max_linewidth) {
-                     DPU_DEBUG_PLANE(pdpu, "invalid src " DRM_RECT_FMT " line:%u\n",
-                                     DRM_RECT_ARG(&pipe_cfg->src_rect), max_linewidth);
-                     return -E2BIG;
-             }
-
               if (drm_rect_width(&pipe_cfg->src_rect) != drm_rect_width(&pipe_cfg->dst_rect) ||
                   drm_rect_height(&pipe_cfg->src_rect) != drm_rect_height(&pipe_cfg->dst_rect) ||
                   (!test_bit(DPU_SSPP_SMART_DMA_V1, &pipe->sspp->cap->features) &&
@@ -921,26 +953,6 @@ static int dpu_plane_atomic_check(struct drm_plane *plane,
               r_pipe->multirect_index = DPU_SSPP_RECT_1;
               r_pipe->multirect_mode = DPU_SSPP_MULTIRECT_PARALLEL;

-             *r_pipe_cfg = *pipe_cfg;
-             pipe_cfg->src_rect.x2 = (pipe_cfg->src_rect.x1 + pipe_cfg->src_rect.x2) >> 1;
-             pipe_cfg->dst_rect.x2 = (pipe_cfg->dst_rect.x1 + pipe_cfg->dst_rect.x2) >> 1;
-             r_pipe_cfg->src_rect.x1 = pipe_cfg->src_rect.x2;
-             r_pipe_cfg->dst_rect.x1 = pipe_cfg->dst_rect.x2;
-     }
-
-     drm_rect_rotate_inv(&pipe_cfg->src_rect,
-                         new_plane_state->fb->width, new_plane_state->fb->height,
-                         new_plane_state->rotation);
-     if (r_pipe->sspp)
-             drm_rect_rotate_inv(&r_pipe_cfg->src_rect,
-                                 new_plane_state->fb->width, new_plane_state->fb->height,
-                                 new_plane_state->rotation);
-
-     ret = dpu_plane_atomic_check_pipe(pdpu, pipe, pipe_cfg, fmt, &crtc_state->adjusted_mode);
-     if (ret)
-             return ret;
-
-     if (r_pipe->sspp) {
               ret = dpu_plane_atomic_check_pipe(pdpu, r_pipe, r_pipe_cfg, fmt,
                                                 &crtc_state->adjusted_mode);
               if (ret)
@@ -963,11 +975,45 @@ static int dpu_plane_atomic_check(struct drm_plane *plane,
       }

       pstate->rotation = rotation;

The dpu_plane_check_inline_rotation() is also pipe independent. So even
that goes to dpu_plane_atomic_check_nopipe()?

It also depends on the sblk if I remember correctly. Also note that
the next patch moves it to check_pipe().


Ack. I checked the next change. this part is fine.


-     pstate->needs_qos_remap = drm_atomic_crtc_needs_modeset(crtc_state);

       return 0;
   }


<snip>






[Index of Archives]     [Linux DRI Users]     [Linux Intel Graphics]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux