Re: [PATCH v5 03/16] drm/msm/dpu: move CRTC resource assignment to dpu_encoder_virt_atomic_mode_set

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 





On 7/16/2024 4:06 PM, Dmitry Baryshkov wrote:
On Wed, 17 Jul 2024 at 01:40, Abhinav Kumar <quic_abhinavk@xxxxxxxxxxx> wrote:



On 6/24/2024 2:13 PM, Dmitry Baryshkov wrote:
Historically CRTC resources (LMs and CTLs) were assigned in
dpu_crtc_atomic_begin(). The commit 9222cdd27e82 ("drm/msm/dpu: move hw
resource tracking to crtc state") simply moved resources to
struct dpu_crtc_state, without changing the code sequence. Later on the
commit b107603b4ad0 ("drm/msm/dpu: map mixer/ctl hw blocks in encoder
modeset") rearanged the code, but still kept the cstate->num_mixers
assignment to happen during commit phase. This makes dpu_crtc_state
inconsistent between consequent atomic_check() calls.

Move CRTC resource assignment to happen at the end of
dpu_encoder_virt_atomic_check().


I just realized, why is the subject saying dpu_encoder_virt_atomic_mode_set while the patch is moving the assignment to dpu_encoder_virt_atomic_check(). It should say dpu_encoder_virt_atomic_check().

One more commment below.

Fixes: b107603b4ad0 ("drm/msm/dpu: map mixer/ctl hw blocks in encoder modeset")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
---
   drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c    |  3 --
   drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c | 60 +++++++++++++++++++----------
   2 files changed, 39 insertions(+), 24 deletions(-)

diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c
index 9f2164782844..7399794d75eb 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c
@@ -1094,9 +1094,6 @@ static void dpu_crtc_disable(struct drm_crtc *crtc,
       drm_for_each_encoder_mask(encoder, crtc->dev, crtc->state->encoder_mask)
               dpu_encoder_register_frame_event_callback(encoder, NULL, NULL);

-     memset(cstate->mixers, 0, sizeof(cstate->mixers));
-     cstate->num_mixers = 0;
-

Any reason this part was removed?

I think we still need this part.

In dpu_encoder_get_topology(), we do not assign topology.num_lm based on
state parameters, its based on catalog and intf_count which are decided
at init time itself.

Which means cstate->num_mixers will remain at a non-zero value even if
we have NO_MODE which is what happens when we are disabling the CRTC
during suspend or hotplug.

In the disable path the driver calls dpu_rm_release(), releasing all
resources. So there will be no assigned mixers, which matches num_lm =
0 in dpu_encoder_assign_crtc_resources().


Ack.


       /* disable clk & bw control until clk & bw properties are set */
       cstate->bw_control = false;
       cstate->bw_split_vote = false;
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c
index 7613005fbfea..98f3a8d84300 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c
@@ -628,6 +628,41 @@ static struct msm_display_topology dpu_encoder_get_topology(
       return topology;
   }

+static void dpu_encoder_assign_crtc_resources(struct dpu_kms *dpu_kms,
+                                           struct drm_encoder *drm_enc,
+                                           struct dpu_global_state *global_state,
+                                           struct drm_crtc_state *crtc_state)
+{
+     struct dpu_crtc_state *cstate;
+     struct dpu_hw_blk *hw_ctl[MAX_CHANNELS_PER_ENC];
+     struct dpu_hw_blk *hw_lm[MAX_CHANNELS_PER_ENC];
+     struct dpu_hw_blk *hw_dspp[MAX_CHANNELS_PER_ENC];
+     int num_lm, num_ctl, num_dspp, i;
+
+     cstate = to_dpu_crtc_state(crtc_state);
+
+     memset(cstate->mixers, 0, sizeof(cstate->mixers));
+
+     num_ctl = dpu_rm_get_assigned_resources(&dpu_kms->rm, global_state,
+             drm_enc->base.id, DPU_HW_BLK_CTL, hw_ctl, ARRAY_SIZE(hw_ctl));
+     num_lm = dpu_rm_get_assigned_resources(&dpu_kms->rm, global_state,
+             drm_enc->base.id, DPU_HW_BLK_LM, hw_lm, ARRAY_SIZE(hw_lm));
+     num_dspp = dpu_rm_get_assigned_resources(&dpu_kms->rm, global_state,
+             drm_enc->base.id, DPU_HW_BLK_DSPP, hw_dspp,
+             ARRAY_SIZE(hw_dspp));
+
+     for (i = 0; i < num_lm; i++) {
+             int ctl_idx = (i < num_ctl) ? i : (num_ctl-1);
+
+             cstate->mixers[i].hw_lm = to_dpu_hw_mixer(hw_lm[i]);
+             cstate->mixers[i].lm_ctl = to_dpu_hw_ctl(hw_ctl[ctl_idx]);
+             if (i < num_dspp)

Will there be a case where num_lm != num_dspp?

No, _dpu_rm_check_lm_and_get_connected_blks() makes sure that num_lm = num_dspp.
I will drop this condition and add a comment.


+                     cstate->mixers[i].hw_dspp = to_dpu_hw_dspp(hw_dspp[i]);
+     }
+
+     cstate->num_mixers = num_lm;
+}
+
   static int dpu_encoder_virt_atomic_check(
               struct drm_encoder *drm_enc,
               struct drm_crtc_state *crtc_state,
@@ -698,6 +733,9 @@ static int dpu_encoder_virt_atomic_check(
                                       drm_enc, crtc_state, topology);
       }

+     if (!ret)
+             dpu_encoder_assign_crtc_resources(dpu_kms, drm_enc, global_state, crtc_state);
+

Do we need to protect this with a needs_modeset() condition? Like why should this get called every check?

       trace_dpu_enc_atomic_check_flags(DRMID(drm_enc), adj_mode->flags);

       return ret;
@@ -1097,14 +1135,11 @@ static void dpu_encoder_virt_atomic_mode_set(struct drm_encoder *drm_enc,
       struct dpu_encoder_virt *dpu_enc;
       struct msm_drm_private *priv;
       struct dpu_kms *dpu_kms;
-     struct dpu_crtc_state *cstate;
       struct dpu_global_state *global_state;
       struct dpu_hw_blk *hw_pp[MAX_CHANNELS_PER_ENC];
       struct dpu_hw_blk *hw_ctl[MAX_CHANNELS_PER_ENC];
-     struct dpu_hw_blk *hw_lm[MAX_CHANNELS_PER_ENC];
-     struct dpu_hw_blk *hw_dspp[MAX_CHANNELS_PER_ENC] = { NULL };
       struct dpu_hw_blk *hw_dsc[MAX_CHANNELS_PER_ENC];
-     int num_lm, num_ctl, num_pp, num_dsc;
+     int num_ctl, num_pp, num_dsc;
       unsigned int dsc_mask = 0;
       int i;

@@ -1133,11 +1168,6 @@ static void dpu_encoder_virt_atomic_mode_set(struct drm_encoder *drm_enc,
               ARRAY_SIZE(hw_pp));
       num_ctl = dpu_rm_get_assigned_resources(&dpu_kms->rm, global_state,
               drm_enc->base.id, DPU_HW_BLK_CTL, hw_ctl, ARRAY_SIZE(hw_ctl));
-     num_lm = dpu_rm_get_assigned_resources(&dpu_kms->rm, global_state,
-             drm_enc->base.id, DPU_HW_BLK_LM, hw_lm, ARRAY_SIZE(hw_lm));
-     dpu_rm_get_assigned_resources(&dpu_kms->rm, global_state,
-             drm_enc->base.id, DPU_HW_BLK_DSPP, hw_dspp,
-             ARRAY_SIZE(hw_dspp));

       for (i = 0; i < MAX_CHANNELS_PER_ENC; i++)
               dpu_enc->hw_pp[i] = i < num_pp ? to_dpu_hw_pingpong(hw_pp[i])
@@ -1163,18 +1193,6 @@ static void dpu_encoder_virt_atomic_mode_set(struct drm_encoder *drm_enc,
               dpu_enc->cur_master->hw_cdm = hw_cdm ? to_dpu_hw_cdm(hw_cdm) : NULL;
       }

-     cstate = to_dpu_crtc_state(crtc_state);
-
-     for (i = 0; i < num_lm; i++) {
-             int ctl_idx = (i < num_ctl) ? i : (num_ctl-1);
-
-             cstate->mixers[i].hw_lm = to_dpu_hw_mixer(hw_lm[i]);
-             cstate->mixers[i].lm_ctl = to_dpu_hw_ctl(hw_ctl[ctl_idx]);
-             cstate->mixers[i].hw_dspp = to_dpu_hw_dspp(hw_dspp[i]);
-     }
-
-     cstate->num_mixers = num_lm;
-
       dpu_enc->connector = conn_state->connector;

       for (i = 0; i < dpu_enc->num_phys_encs; i++) {







[Index of Archives]     [Linux DRI Users]     [Linux Intel Graphics]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux