Hi Chukun,
On Sunday, 25 August 2024 10:25:09 EDT Chukun Pan wrote:
> Hi,
>
> > --- /dev/null
> > +++ b/arch/arm64/boot/dts/rockchip/rk3576-armsom-sige5.dts
> > ...
> > + leds: leds {
> > + compatible = "gpio-leds";
>
> Maybe there should be a blank line.
>
> > + work_led: work-led {
> > + gpios = <&gpio0 RK_PB4 GPIO_ACTIVE_HIGH>;
> > + linux,default-trigger = "heartbeat";
> > + };
> > + };
>
> Is the color missing?
Actually, after rechecking, this is wrong. There are 2 LEDs on &gpio4:
- PB2: Green
- PB1: Red
I can set the green one as heartbeat and the red one as default-on.
> > ...
> > + vcc_3v3_rtc_s5: regulator-vcc-3v3-rtc-s5 {
> > + compatible = "regulator-fixed";
> > + regulator-name = "vcc_3v3_rtc_s5";
> > + regulator-boot-on;
> > + regulator-always-on;
> > + regulator-min-microvolt = <3300000>;
> > + regulator-max-microvolt = <3300000>;
> > + vin-supply = <&vcc_5v0_sys>;
> > + };
>
> Missing blank line.
>
> > + vcc_1v8_s0: regulator-vcc-1v8-s0 {
> > + compatible = "regulator-fixed";
> > + regulator-name = "vcc_1v8_s0";
> > + regulator-boot-on;
> > + regulator-always-on;
> > + regulator-min-microvolt = <1800000>;
> > + regulator-max-microvolt = <1800000>;
> > + vin-supply = <&vcc_1v8_s3>;
> > + };
> > ...
> > +&gmac0 {
> > + phy-mode = "rgmii-rxid";
>
> Can we use "rgmii-id" and remove tx_delay here?
Indeed, that's better.
> > ...
> > +&sdmmc {
> > + bus-width = <4>;
> > + cap-mmc-highspeed;
> > + cap-sd-highspeed;
> > + disable-wp;
> > + max-frequency = <200000000>;
> > + no-sdio;
> > + no-mmc;
> > + non-removable;
> > + sd-uhs-sdr104;
> > + vmmc-supply = <&vcc_3v3_s3>;
>
> Indentation error.
>
> > + vqmmc-supply = <&vccio_sd_s0>;
> > + status = "okay";
> > +};
> > ...
>
> Thanks,
> Chukun
