RE: [PATCH v4 0/4] Add support for RZ/G2UL Display Unit

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Laurent,

> -----Original Message-----
> From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
> Sent: Friday, August 23, 2024 2:15 PM
> Subject: Re: [PATCH v4 0/4] Add support for RZ/G2UL Display Unit
> 
> Hi Biju,
> 
> On Thu, Aug 22, 2024 at 05:23:13PM +0100, Biju Das wrote:
> > This patch series aims to add support for RZ/G2UL DU.
> >
> > The LCD controller is composed of Frame Compression Processor (FCPVD),
> > Video Signal Processor (VSPD), and Display Unit (DU).
> >
> > The output of LCDC is connected display parallel interface (DPI) and
> > supports a maximum resolution of WXGA along with 2 RPFs to support the
> > blending of two picture layers and raster operations (ROPs)
> >
> > It is similar to LCDC IP on RZ/G2L SoCs, but does not have DSI interface.
> >
> > v3->v4:
> >  * Restored the ports property for RZ/G2UL and described port@0 for the
> >    DPI interface in bindings patch.
> >  * Restored tags from Geert and Conor as the change is trivial
> >    (Replaced port 1->0 from v2).
> >  * Used "&" instead of "==" in rzg2l_du_start_stop() for scalability.
> >  * Restored port variable in struct rzg2l_du_output_routing
> >  * Updated rzg2l_du_encoders_init() to handle port based on hardware indices.
> >  * Restored ports property in du node and used port@0 for connected
> >    DPI interface.
> > v2->v3:
> >  * Split patch series based on subsystem from DU patch series [1].
> >  * Replaced ports->port property for RZ/G2UL as it supports only DPI
> >    and retained ports property for RZ/{G2L,V2L} as it supports both DSI
> >    and DPI output interface.
> >  * Added missing blank line before example.
> >  * Dropped tags from Conor and Geert as there are new changes in
> > bindings
> >  * Avoided the line break in rzg2l_du_start_stop() for rstate.
> >  * Replaced port->du_output in  struct rzg2l_du_output_routing and
> >    dropped using the port number to indicate the output type in
> >    rzg2l_du_encoders_init().
> >  * Updated rzg2l_du_r9a07g043u_info and rzg2l_du_r9a07g044_info.
> >
> >  [1]
> > https://lore.kernel.org/all/20240709135152.185042-1-biju.das.jz@xxxxxx
> > esas.com/
> > v1->v2:
> >  * Updated cover letter header "DU IP->Display Unit".
> >  * Updated commit description related to non ABI breakage for patch#3.
> >  * Added Ack from Conor for binding patches.
> >
> > Biju Das (4):
> >   dt-bindings: display: renesas,rzg2l-du: Document RZ/G2UL DU bindings
> >   drm: renesas: rz-du: Add RZ/G2UL DU Support
> 
> The first two patches look good to me. Do you have access to drm-misc, will you push them yourself, or
> do you expect a maintainer to pick them up ?

I don’t have access to drm-misc. I expect a maintainer to pick it up(Maybe via rcar-du tree or 
drm-misc tree), or else if it is ok, what is the procedure to get access for drm-misc tree??

Cheers,
Biju


> 
> >   arm64: dts: renesas: r9a07g043u: Add DU node
> >   arm64: dts: renesas: r9a07g043u11-smarc: Enable DU
> >
> >  .../bindings/display/renesas,rzg2l-du.yaml    |  32 ++++-
> >  arch/arm64/boot/dts/renesas/r9a07g043u.dtsi   |  25 ++++
> >  .../boot/dts/renesas/r9a07g043u11-smarc.dts   | 111 ++++++++++++++++++
> >  drivers/gpu/drm/renesas/rz-du/rzg2l_du_crtc.c |   8 +-
> >  drivers/gpu/drm/renesas/rz-du/rzg2l_du_drv.c  |  11 ++
> >  drivers/gpu/drm/renesas/rz-du/rzg2l_du_kms.c  |   3 +-
> >  6 files changed, 185 insertions(+), 5 deletions(-)
> 
> --
> Regards,
> 
> Laurent Pinchart




[Index of Archives]     [Linux DRI Users]     [Linux Intel Graphics]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux