Hi Rong,
On Tue, Aug 20, 2024 at 10:59 PM Rong Qianfeng <rongqianfeng@xxxxxxxx> wrote:
>
> Replace devm_clk_get() and clk_prepare_enable() with
> devm_clk_get_enabled() that also disables and unprepares it on
> driver detach.
>
> Signed-off-by: Rong Qianfeng <rongqianfeng@xxxxxxxx>
> ---
> drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_drv.c | 13 +++----------
> drivers/gpu/drm/sun4i/sun6i_drc.c | 15 ++++-----------
> drivers/gpu/drm/sun4i/sun8i_mixer.c | 13 +++----------
> 3 files changed, 10 insertions(+), 31 deletions(-)
>
> diff --git a/drivers/gpu/drm/sun4i/sun6i_drc.c b/drivers/gpu/drm/sun4i/sun6i_drc.c
> index 0d342f43fa93..f263ad282828 100644
> --- a/drivers/gpu/drm/sun4i/sun6i_drc.c
> +++ b/drivers/gpu/drm/sun4i/sun6i_drc.c
> @@ -42,33 +42,28 @@ static int sun6i_drc_bind(struct device *dev, struct device *master,
> return ret;
> }
>
> - drc->bus_clk = devm_clk_get(dev, "ahb");
> + drc->bus_clk = devm_clk_get_enabled(dev, "ahb");
> if (IS_ERR(drc->bus_clk)) {
> dev_err(dev, "Couldn't get our bus clock\n");
> ret = PTR_ERR(drc->bus_clk);
> goto err_assert_reset;
> }
> - clk_prepare_enable(drc->bus_clk);
>
> - drc->mod_clk = devm_clk_get(dev, "mod");
> + drc->mod_clk = devm_clk_get_enabled(dev, "mod");
> if (IS_ERR(drc->mod_clk)) {
> dev_err(dev, "Couldn't get our mod clock\n");
> ret = PTR_ERR(drc->mod_clk);
> - goto err_disable_bus_clk;
> + goto err_assert_reset;
> }
>
> ret = clk_set_rate_exclusive(drc->mod_clk, 300000000);
> if (ret) {
> dev_err(dev, "Couldn't set the module clock frequency\n");
> - goto err_disable_bus_clk;
> + goto err_assert_reset;
> }
>
> - clk_prepare_enable(drc->mod_clk);
Am I reading this right: is this changing the init sequence so that
the clock is enabled before setting a rate?
This is the sort of thing that might cause glitches and issues in some
hardware, so it'd be polite to test such a change on the actual
hardware before posting it.
Thanks,
--
Julian Calaby
Email: julian.calaby@xxxxxxxxx
Profile: http://www.google.com/profiles/julian.calaby/
