Re: [PATCH 2/2] drm/panel: simple: Add ON Tat Industrial Company KD50G21-40NT-A1 panel

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 16/08/2024 10:50, Liu Ying wrote:
ON Tat Industrial Company KD50G21-40NT-A1 is a 5" WVGA LCD panel with DPI
interface.

The LCD module specification can be found at:
https://cdn-shop.adafruit.com/datasheets/KD50G21-40NT-A1.pdf

Signed-off-by: Liu Ying <victor.liu@xxxxxxx>
---
  drivers/gpu/drm/panel/panel-simple.c | 36 ++++++++++++++++++++++++++++
  1 file changed, 36 insertions(+)

diff --git a/drivers/gpu/drm/panel/panel-simple.c b/drivers/gpu/drm/panel/panel-simple.c
index bf40057c5cf3..89963df80917 100644
--- a/drivers/gpu/drm/panel/panel-simple.c
+++ b/drivers/gpu/drm/panel/panel-simple.c
@@ -3478,6 +3478,39 @@ static const struct panel_desc olimex_lcd_olinuxino_43ts = {
  	.bus_format = MEDIA_BUS_FMT_RGB888_1X24,
  };
+static const struct display_timing ontat_kd50g21_40nt_a1_timing = {
+	.pixelclock = { 30000000, 30000000, 50000000 },
+	.hactive = { 800, 800, 800 },
+	.hfront_porch = { 1, 40, 255 },
+	.hback_porch = { 1, 40, 87 },
+	.hsync_len = { 1, 48, 87 },
+	.vactive = { 480, 480, 480 },
+	.vfront_porch = { 1, 13, 255 },
+	.vback_porch = { 1, 29, 29 },
+	.vsync_len = { 3, 3, 31 },
+	.flags = DISPLAY_FLAGS_HSYNC_LOW | DISPLAY_FLAGS_VSYNC_LOW |
+		 DISPLAY_FLAGS_DE_HIGH | DISPLAY_FLAGS_PIXDATA_POSEDGE,
+};
+
+static const struct panel_desc ontat_kd50g21_40nt_a1 = {
+	.timings = &ontat_kd50g21_40nt_a1_timing,
+	.num_timings = 1,
+	.bpc = 8,
+	.size = {
+		.width = 108,
+		.height = 65,
+	},
+	.delay = {
+		.prepare = 147,		/* 5 VSDs */
+		.enable = 147,		/* 5 VSDs */
+		.disable = 88,		/* 3 VSDs */
+		.unprepare = 117,	/* 4 VSDs */
+	},
+	.bus_format = MEDIA_BUS_FMT_RGB888_1X24,
+	.bus_flags = DRM_BUS_FLAG_DE_HIGH | DRM_BUS_FLAG_PIXDATA_SAMPLE_NEGEDGE,
+	.connector_type = DRM_MODE_CONNECTOR_DPI,
+};
+
  /*
   * 800x480 CVT. The panel appears to be quite accepting, at least as far as
   * pixel clocks, but this is the timing that was being used in the Adafruit
@@ -4837,6 +4870,9 @@ static const struct of_device_id platform_of_match[] = {
  	}, {
  		.compatible = "olimex,lcd-olinuxino-43-ts",
  		.data = &olimex_lcd_olinuxino_43ts,
+	}, {
+		.compatible = "ontat,kd50g21-40nt-a1",
+		.data = &ontat_kd50g21_40nt_a1,
  	}, {
  		.compatible = "ontat,yx700wv03",
  		.data = &ontat_yx700wv03,

Reviewed-by: Neil Armstrong <neil.armstrong@xxxxxxxxxx>



[Index of Archives]     [Linux DRI Users]     [Linux Intel Graphics]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux