Permanently set the connector status to 'connected'. Return BMC modes
for connector if no display is attached to the physical DP connector.
Otherwise use EDID modes as before.
If the status of the physical connector changes, the driver still
generates a hotplug event. DRM clients will then reconfigure their
output to a mode appropriate for either physical display or BMC.
v3:
- use struct ast_connector.physical_status to handle BMC
Signed-off-by: Thomas Zimmermann <tzimmermann@xxxxxxx>
Reviewed-by: Jocelyn Falempe <jfalempe@xxxxxxxxxx>
---
drivers/gpu/drm/ast/ast_sil164.c | 27 +++++++++++++++++++++++++--
1 file changed, 25 insertions(+), 2 deletions(-)
diff --git a/drivers/gpu/drm/ast/ast_sil164.c b/drivers/gpu/drm/ast/ast_sil164.c
index 05f991aa34ca..496c7120e515 100644
--- a/drivers/gpu/drm/ast/ast_sil164.c
+++ b/drivers/gpu/drm/ast/ast_sil164.c
@@ -21,6 +21,27 @@ static const struct drm_encoder_funcs ast_sil164_encoder_funcs = {
* Connector
*/
+static int ast_sil164_connector_helper_get_modes(struct drm_connector *connector)
+{
+ struct ast_connector *ast_connector = to_ast_connector(connector);
+ int count;
+
+ if (ast_connector->physical_status == connector_status_connected) {
+ count = drm_connector_helper_get_modes(connector);
+ } else {
+ /*
+ * There's no EDID data without a connected monitor. Set BMC-
+ * compatible modes in this case. The XGA default resolution
+ * should work well for all BMCs.
+ */
+ count = drm_add_modes_noedid(connector, 4096, 4096);
+ if (count)
+ drm_set_preferred_mode(connector, 1024, 768);
+ }
+
+ return count;
+}
+
static int ast_sil164_connector_helper_detect_ctx(struct drm_connector *connector,
struct drm_modeset_acquire_ctx *ctx,
bool force)
@@ -30,13 +51,15 @@ static int ast_sil164_connector_helper_detect_ctx(struct drm_connector *connecto
status = drm_connector_helper_detect_from_ddc(connector, ctx, force);
+ if (status != ast_connector->physical_status)
+ ++connector->epoch_counter;
ast_connector->physical_status = status;
- return status;
+ return connector_status_connected;
}
static const struct drm_connector_helper_funcs ast_sil164_connector_helper_funcs = {
- .get_modes = drm_connector_helper_get_modes,
+ .get_modes = ast_sil164_connector_helper_get_modes,
.detect_ctx = ast_sil164_connector_helper_detect_ctx,
};
--
2.46.0
