Permanently set the connector status to 'connected'. Return BMC modes
for connector if no display is attached to the physical DP connector.
Otherwise use EDID modes as before.
If the status of the physical connector changes, the driver still
generates a hotplug event. DRM clients will then reconfigure their
output to a mode appropriate for either physical display or BMC.
Signed-off-by: Thomas Zimmermann <tzimmermann@xxxxxxx>
---
drivers/gpu/drm/ast/ast_sil164.c | 40 ++++++++++++++++++++++++++++++--
1 file changed, 38 insertions(+), 2 deletions(-)
diff --git a/drivers/gpu/drm/ast/ast_sil164.c b/drivers/gpu/drm/ast/ast_sil164.c
index 6e17d84f994e..940118544fae 100644
--- a/drivers/gpu/drm/ast/ast_sil164.c
+++ b/drivers/gpu/drm/ast/ast_sil164.c
@@ -21,9 +21,45 @@ static const struct drm_encoder_funcs ast_sil164_encoder_funcs = {
* Connector
*/
+static int ast_sil164_connector_helper_get_modes(struct drm_connector *connector)
+{
+ int count = drm_connector_helper_get_modes(connector);
+
+ if (!count) {
+ /*
+ * There's no EDID data without a connected monitor. Set BMC-
+ * compatible modes in this case. The XGA default resolution
+ * should work well for all BMCs.
+ */
+ count = drm_add_modes_noedid(connector, 4096, 4096);
+ if (count)
+ drm_set_preferred_mode(connector, 1024, 768);
+ }
+
+ return count;
+}
+
+static int ast_sil164_connector_helper_detect_ctx(struct drm_connector *connector,
+ struct drm_modeset_acquire_ctx *ctx,
+ bool force)
+{
+ enum drm_connector_status old_status, status;
+
+ if (connector->edid_blob_ptr)
+ old_status = connector_status_connected;
+ else
+ old_status = connector_status_disconnected;
+
+ status = drm_connector_helper_detect_from_ddc(connector, ctx, force);
+
+ if (status != old_status)
+ ++connector->epoch_counter;
+ return connector_status_connected;
+}
+
static const struct drm_connector_helper_funcs ast_sil164_connector_helper_funcs = {
- .get_modes = drm_connector_helper_get_modes,
- .detect_ctx = drm_connector_helper_detect_from_ddc,
+ .get_modes = ast_sil164_connector_helper_get_modes,
+ .detect_ctx = ast_sil164_connector_helper_detect_ctx,
};
static const struct drm_connector_funcs ast_sil164_connector_funcs = {
--
2.46.0
