On SM8350 platform the DSI internally is using the refgen regulator. Add
corresponding device node and link it as a supply to the DSI node.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
---
arch/arm64/boot/dts/qcom/sm8350.dtsi | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sm8350.dtsi b/arch/arm64/boot/dts/qcom/sm8350.dtsi
index 27f36e6366df..37a2aba0d4ca 100644
--- a/arch/arm64/boot/dts/qcom/sm8350.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8350.dtsi
@@ -2251,6 +2251,12 @@ usb_2_hsphy: phy@88e4000 {
resets = <&gcc GCC_QUSB2PHY_SEC_BCR>;
};
+ refgen: regulator@88e7000 {
+ compatible = "qcom,sm8350-refgen-regulator",
+ "qcom,sm8250-refgen-regulator";
+ reg = <0x0 0x088e7000 0x0 0x84>;
+ };
+
usb_1_qmpphy: phy@88e8000 {
compatible = "qcom,sm8350-qmp-usb3-dp-phy";
reg = <0 0x088e8000 0 0x3000>;
@@ -2710,6 +2716,7 @@ mdss_dsi0: dsi@ae94000 {
operating-points-v2 = <&dsi0_opp_table>;
power-domains = <&rpmhpd RPMHPD_MMCX>;
+ refgen-supply = <&refgen>;
phys = <&mdss_dsi0_phy>;
@@ -2808,6 +2815,7 @@ mdss_dsi1: dsi@ae96000 {
operating-points-v2 = <&dsi1_opp_table>;
power-domains = <&rpmhpd RPMHPD_MMCX>;
+ refgen-supply = <&refgen>;
phys = <&mdss_dsi1_phy>;
--
2.39.2
