Re: [PATCH v2 0/5] Introduce DMA_HEAP_ALLOC_AND_READ_FILE heap flag

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue, Jul 30, 2024 at 1:14 AM Huan Yang <link@xxxxxxxx> wrote:
>
>
> 在 2024/7/30 16:03, Christian König 写道:
> > Am 30.07.24 um 09:57 schrieb Huan Yang:
> >> Background
> >> ====
> >> Some user may need load file into dma-buf, current way is:
> >>    1. allocate a dma-buf, get dma-buf fd
> >>    2. mmap dma-buf fd into user vaddr
> >>    3. read(file_fd, vaddr, fsz)
> >> Due to dma-buf user map can't support direct I/O[1], the file read
> >> must be buffer I/O.
> >>
> >> This means that during the process of reading the file into dma-buf,
> >> page cache needs to be generated, and the corresponding content needs to
> >> be first copied to the page cache before being copied to the dma-buf.
> >>
> >> This way worked well when reading relatively small files before, as
> >> the page cache can cache the file content, thus improving performance.
> >>
> >> However, there are new challenges currently, especially as AI models are
> >> becoming larger and need to be shared between DMA devices and the CPU
> >> via dma-buf.
> >>
> >> For example, our 7B model file size is around 3.4GB. Using the
> >> previous would mean generating a total of 3.4GB of page cache
> >> (even if it will be reclaimed), and also requiring the copying of 3.4GB
> >> of content between page cache and dma-buf.
> >>
> >> Due to the limited resources of system memory, files in the gigabyte
> >> range
> >> cannot persist in memory indefinitely, so this portion of page cache may
> >> not provide much assistance for subsequent reads. Additionally, the
> >> existence of page cache will consume additional system resources due to
> >> the extra copying required by the CPU.
> >>
> >> Therefore, I think it is necessary for dma-buf to support direct I/O.
> >>
> >> However, direct I/O file reads cannot be performed using the buffer
> >> mmaped by the user space for the dma-buf.[1]
> >>
> >> Here are some discussions on implementing direct I/O using dma-buf:
> >>
> >> mmap[1]
> >> ---
> >> dma-buf never support user map vaddr use of direct I/O.
> >>
> >> udmabuf[2]
> >> ---
> >> Currently, udmabuf can use the memfd method to read files into
> >> dma-buf in direct I/O mode.
> >>
> >> However, if the size is large, the current udmabuf needs to adjust the
> >> corresponding size_limit(default 64MB).
> >> But using udmabuf for files at the 3GB level is not a very good
> >> approach.
> >> It needs to make some adjustments internally to handle this.[3] Or else,
> >> fail create.
> >>
> >> But, it is indeed a viable way to enable dma-buf to support direct I/O.
> >> However, it is necessary to initiate the file read after the memory
> >> allocation
> >> is completed, and handle race conditions carefully.
> >>
> >> sendfile/splice[4]
> >> ---
> >> Another way to enable dma-buf to support direct I/O is by implementing
> >> splice_write/write_iter in the dma-buf file operations (fops) to adapt
> >> to the sendfile method.
> >> However, the current sendfile/splice calls are based on pipe. When using
> >> direct I/O to read a file, the content needs to be copied to the buffer
> >> allocated by the pipe (default 64KB), and then the dma-buf fops'
> >> splice_write needs to be called to write the content into the dma-buf.
> >> This approach requires serially reading the content of file pipe size
> >> into the pipe buffer and then waiting for the dma-buf to be written
> >> before reading the next one.(The I/O performance is relatively weak
> >> under direct I/O.)
> >> Moreover, due to the existence of the pipe buffer, even when using
> >> direct I/O and not needing to generate additional page cache,
> >> there still needs to be a CPU copy.
> >>
> >> copy_file_range[5]
> >> ---
> >> Consider of copy_file_range, It only supports copying files within the
> >> same file system. Similarly, it is not very practical.
> >>
> >>
> >> So, currently, there is no particularly suitable solution on VFS to
> >> allow dma-buf to support direct I/O for large file reads.
> >>
> >> This patchset provides an idea to complete file reads when requesting a
> >> dma-buf.
> >>
> >> Introduce DMA_HEAP_ALLOC_AND_READ_FILE heap flag
> >> ===
> >> This patch provides a method to immediately read the file content after
> >> the dma-buf is allocated, and only returns the dma-buf file descriptor
> >> after the file is fully read.
> >>
> >> Since the dma-buf file descriptor is not returned, no other thread can
> >> access it except for the current thread, so we don't need to worry about
> >> race conditions.
> >
> > That is a completely false assumption.
> Can you provide a detailed explanation as to why this assumption is
> incorrect? thanks.
> >
> >>
> >> Map the dma-buf to the vmalloc area and initiate file reads in kernel
> >> space, supporting both buffer I/O and direct I/O.
> >>
> >> This patch adds the DMA_HEAP_ALLOC_AND_READ heap_flag for user.
> >> When a user needs to allocate a dma-buf and read a file, they should
> >> pass this heap flag. As the size of the file being read is fixed,
> >> there is no
> >> need to pass the 'len' parameter. Instead, The file_fd needs to be
> >> passed to
> >> indicate to the kernel the file that needs to be read.
> >>
> >> The file open flag determines the mode of file reading.
> >> But, please note that if direct I/O(O_DIRECT) is needed to read the
> >> file,
> >> the file size must be page aligned. (with patch 2-5, no need)
> >>
> >> Therefore, for the user, len and file_fd are mutually exclusive,
> >> and they are combined using a union.
> >>
> >> Once the user obtains the dma-buf fd, the dma-buf directly contains the
> >> file content.
> >
> > And I'm repeating myself, but this is a complete NAK from my side to
> > this approach.
> >
> > We pointed out multiple ways of how to implement this cleanly and not
> > by hacking functionality into the kernel which absolutely doesn't
> > belong there.
> In this patchset, I have provided performance comparisons of each of
> these methods.  Can you please provide more opinions?
> >
> > Regards,
> > Christian.
> >
> >>
> >> Patch 1 implement it.
> >>
> >> Patch 2-5 provides an approach for performance improvement.
> >>
> >> The DMA_HEAP_ALLOC_AND_READ_FILE heap flag patch enables us to
> >> synchronously read files using direct I/O.
> >>
> >> This approach helps to save CPU copying and avoid a certain degree of
> >> memory thrashing (page cache generation and reclamation)
> >>
> >> When dealing with large file sizes, the benefits of this approach become
> >> particularly significant.
> >>
> >> However, there are currently some methods that can improve performance,
> >> not just save system resources:
> >>
> >> Due to the large file size, for example, a AI 7B model of around
> >> 3.4GB, the
> >> time taken to allocate DMA-BUF memory will be relatively long. Waiting
> >> for the allocation to complete before reading the file will add to the
> >> overall time consumption. Therefore, the total time for DMA-BUF
> >> allocation and file read can be calculated using the formula
> >>     T(total) = T(alloc) + T(I/O)
> >>
> >> However, if we change our approach, we don't necessarily need to wait
> >> for the DMA-BUF allocation to complete before initiating I/O. In fact,
> >> during the allocation process, we already hold a portion of the page,
> >> which means that waiting for subsequent page allocations to complete
> >> before carrying out file reads is actually unfair to the pages that have
> >> already been allocated.
> >>
> >> The allocation of pages is sequential, and the reading of the file is
> >> also sequential, with the content and size corresponding to the file.
> >> This means that the memory location for each page, which holds the
> >> content of a specific position in the file, can be determined at the
> >> time of allocation.
> >>
> >> However, to fully leverage I/O performance, it is best to wait and
> >> gather a certain number of pages before initiating batch processing.
> >>
> >> The default gather size is 128MB. So, ever gathered can see as a file
> >> read
> >> work, it maps the gather page to the vmalloc area to obtain a continuous
> >> virtual address, which is used as a buffer to store the contents of the
> >> corresponding file. So, if using direct I/O to read a file, the file
> >> content will be written directly to the corresponding dma-buf buffer
> >> memory
> >> without any additional copying.(compare to pipe buffer.)
> >>
> >> Consider other ways to read into dma-buf. If we assume reading after
> >> mmap
> >> dma-buf, we need to map the pages of the dma-buf to the user virtual
> >> address space. Also, udmabuf memfd need do this operations too.
> >> Even if we support sendfile, the file copy also need buffer, you must
> >> setup it.
> >> So, mapping pages to the vmalloc area does not incur any additional
> >> performance overhead compared to other methods.[6]
> >>
> >> Certainly, the administrator can also modify the gather size through
> >> patch5.
> >>
> >> The formula for the time taken for system_heap buffer allocation and
> >> file reading through async_read is as follows:
> >>
> >>    T(total) = T(first gather page) + Max(T(remain alloc), T(I/O))
> >>
> >> Compared to the synchronous read:
> >>    T(total) = T(alloc) + T(I/O)
> >>
> >> If the allocation time or I/O time is long, the time difference will be
> >> covered by the maximum value between the allocation and I/O. The other
> >> party will be concealed.
> >>
> >> Therefore, the larger the size of the file that needs to be read, the
> >> greater the corresponding benefits will be.
> >>
> >> How to use
> >> ===
> >> Consider the current pathway for loading model files into DMA-BUF:
> >>    1. open dma-heap, get heap fd
> >>    2. open file, get file_fd(can't use O_DIRECT)
> >>    3. use file len to allocate dma-buf, get dma-buf fd
> >>    4. mmap dma-buf fd, get vaddr
> >>    5. read(file_fd, vaddr, file_size) into dma-buf pages
> >>    6. share, attach, whatever you want
> >>
> >> Use DMA_HEAP_ALLOC_AND_READ_FILE JUST a little change:
> >>    1. open dma-heap, get heap fd
> >>    2. open file, get file_fd(buffer/direct)
> >>    3. allocate dma-buf with DMA_HEAP_ALLOC_AND_READ_FILE heap flag,
> >> set file_fd
> >>       instead of len. get dma-buf fd(contains file content)
> >>    4. share, attach, whatever you want
> >>
> >> So, test it is easy.
> >>
> >> How to test
> >> ===
> >> The performance comparison will be conducted for the following
> >> scenarios:
> >>    1. normal
> >>    2. udmabuf with [3] patch
> >>    3. sendfile
> >>    4. only patch 1
> >>    5. patch1 - patch4.
> >>
> >> normal:
> >>    1. open dma-heap, get heap fd
> >>    2. open file, get file_fd(can't use O_DIRECT)
> >>    3. use file len to allocate dma-buf, get dma-buf fd
> >>    4. mmap dma-buf fd, get vaddr
> >>    5. read(file_fd, vaddr, file_size) into dma-buf pages
> >>    6. share, attach, whatever you want
> >>
> >> UDMA-BUF step:
> >>    1. memfd_create
> >>    2. open file(buffer/direct)
> >>    3. udmabuf create
> >>    4. mmap memfd
> >>    5. read file into memfd vaddr
> >>
> >> Sendfile step(need suit splice_write/write_iter, just use to compare):
> >>    1. open dma-heap, get heap fd
> >>    2. open file, get file_fd(buffer/direct)
> >>    3. use file len to allocate dma-buf, get dma-buf fd
> >>    4. sendfile file_fd to dma-buf fd
> >>    6. share, attach, whatever you want
> >>
> >> patch1/patch1-4:
> >>    1. open dma-heap, get heap fd
> >>    2. open file, get file_fd(buffer/direct)
> >>    3. allocate dma-buf with DMA_HEAP_ALLOC_AND_READ_FILE heap flag,
> >> set file_fd
> >>       instead of len. get dma-buf fd(contains file content)
> >>    4. share, attach, whatever you want
> >>
> >> You can create a file to test it. Compare the performance gap between
> >> the two.
> >> It is best to compare the differences in file size from KB to MB to GB.
> >>
> >> The following test data will compare the performance differences
> >> between 512KB,
> >> 8MB, 1GB, and 3GB under various scenarios.
> >>
> >> Performance Test
> >> ===
> >>    12G RAM phone
> >>    UFS4.0(the maximum speed is 4GB/s. ),
> >>    f2fs
> >>    kernel 6.1 with patch[7] (or else, can't support kvec direct I/O
> >> read.)
> >>    no memory pressure.
> >>    drop_cache is used for each test.
> >>
> >> The average of 5 test results:
> >> | scheme-size         | 512KB(ns)  | 8MB(ns)    | 1GB(ns) |
> >> 3GB(ns)       |
> >> | ------------------- | ---------- | ---------- | ------------- |
> >> ------------- |
> >> | normal              | 2,790,861  | 14,535,784 | 1,520,790,492 |
> >> 3,332,438,754 |
> >> | udmabuf buffer I/O  | 1,704,046  | 11,313,476 | 821,348,000 |
> >> 2,108,419,923 |
> >> | sendfile buffer I/O | 3,261,261  | 12,112,292 | 1,565,939,938 |
> >> 3,062,052,984 |
> >> | patch1-4 buffer I/O | 2,064,538  | 10,771,474 | 986,338,800 |
> >> 2,187,570,861 |
> >> | sendfile direct I/O | 12,844,231 | 37,883,938 | 5,110,299,184 |
> >> 9,777,661,077 |
> >> | patch1 direct I/O   | 813,215    | 6,962,092  | 2,364,211,877 |
> >> 5,648,897,554 |
> >> | udmabuf direct I/O  | 1,289,554  | 8,968,138  | 921,480,784 |
> >> 2,158,305,738 |
> >> | patch1-4 direct I/O | 1,957,661  | 6,581,999  | 520,003,538 |
> >> 1,400,006,107 |
>
> With this test, sendfile can't give a good help base on pipe buffer.
>
> udmabuf is good, but I think our oem driver can't suit it. (And, AOSP do
> not open this feature)

Hi Huan,

We should be able to turn on udmabuf for the Android kernels. We don't
have CONFIG_UDMABUF because nobody has wanted it so far. It's
encouraging to see your latest results!

-T.J.


>
> Anyway, I am sending this patchset in the hope of further discussion.
>
> Thanks.
>
> >>
> >> So, based on the test results:
> >>
> >> When the file is large, the patchset has the highest performance.
> >> Compared to normal, patchset is a 50% improvement;
> >> Compared to normal, patch1 only showed a degradation of 41%.
> >> patch1 typical performance breakdown is as follows:
> >>    1. alloc cost 188,802,693 ns
> >>    2. vmap cost 42,491,385 ns
> >>    3. file read cost 4,180,876,702 ns
> >> Therefore, directly performing a single direct I/O read on a large file
> >> may not be the most optimal way for performance.
> >>
> >> The performance of direct I/O implemented by the sendfile method is
> >> the worst.
> >>
> >> When file size is small, The difference in performance is not
> >> significant. This is consistent with expectations.
> >>
> >>
> >>
> >> Suggested use cases
> >> ===
> >>    1. When there is a need to read large files and system resources
> >> are scarce,
> >>       especially when the size of memory is limited.(GB level) In this
> >>       scenario, using direct I/O for file reading can even bring
> >> performance
> >>       improvements.(may need patch2-3)
> >>    2. For embedded devices with limited RAM, using direct I/O can
> >> save system
> >>       resources and avoid unnecessary data copying. Therefore, even
> >> if the
> >>       performance is lower when read small file, it can still be used
> >>       effectively.
> >>    3. If there is sufficient memory, pinning the page cache of the
> >> model files
> >>       in memory and placing file in the EROFS file system for
> >> read-only access
> >>       maybe better.(EROFS do not support direct I/O)
> >>
> >>
> >> Changlog
> >> ===
> >>   v1 [8]
> >>   v1->v2:
> >>     Uses the heap flag method for alloc and read instead of adding a new
> >>     DMA-buf ioctl command. [9]
> >>     Split the patchset to facilitate review and test.
> >>       patch 1 implement alloc and read, offer heap flag into it.
> >>       patch 2-4 offer async read
> >>       patch 5 can change gather limit.
> >>
> >> Reference
> >> ===
> >> [1]
> >> https://lore.kernel.org/all/0393cf47-3fa2-4e32-8b3d-d5d5bdece298@xxxxxxx/
> >> [2]
> >> https://lore.kernel.org/all/ZpTnzkdolpEwFbtu@phenom.ffwll.local/
> >> [3]
> >> https://lore.kernel.org/all/20240725021349.580574-1-link@xxxxxxxx/
> >> [4]
> >> https://lore.kernel.org/all/Zpf5R7fRZZmEwVuR@xxxxxxxxxxxxx/
> >> [5]
> >> https://lore.kernel.org/all/ZpiHKY2pGiBuEq4z@xxxxxxxxxxxxx/
> >> [6]
> >> https://lore.kernel.org/all/9b70db2e-e562-4771-be6b-1fa8df19e356@xxxxxxx/
> >> [7]
> >> https://patchew.org/linux/20230209102954.528942-1-dhowells@xxxxxxxxxx/20230209102954.528942-7-dhowells@xxxxxxxxxx/
> >> [8]
> >> https://lore.kernel.org/all/20240711074221.459589-1-link@xxxxxxxx/
> >> [9]
> >> https://lore.kernel.org/all/5ccbe705-883c-4651-9e66-6b452c414c74@xxxxxxx/
> >>
> >> Huan Yang (5):
> >>    dma-buf: heaps: Introduce DMA_HEAP_ALLOC_AND_READ_FILE heap flag
> >>    dma-buf: heaps: Introduce async alloc read ops
> >>    dma-buf: heaps: support alloc async read file
> >>    dma-buf: heaps: system_heap alloc support async read
> >>    dma-buf: heaps: configurable async read gather limit
> >>
> >>   drivers/dma-buf/dma-heap.c          | 552 +++++++++++++++++++++++++++-
> >>   drivers/dma-buf/heaps/system_heap.c |  70 +++-
> >>   include/linux/dma-heap.h            |  53 ++-
> >>   include/uapi/linux/dma-heap.h       |  11 +-
> >>   4 files changed, 673 insertions(+), 13 deletions(-)
> >>
> >>
> >> base-commit: 931a3b3bccc96e7708c82b30b2b5fa82dfd04890
> >




[Index of Archives]     [Linux DRI Users]     [Linux Intel Graphics]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux