On Fri, 26 Jul 2024 at 01:04, Abhinav Kumar <quic_abhinavk@xxxxxxxxxxx> wrote:
>
> Currently the DP driver hard-codes the max supported bpp to 30.
> This is incorrect because the number of lanes and max data rate
> supported by the lanes need to be taken into account.
>
> Replace the hardcoded limit with the appropriate math which accounts
> for the accurate number of lanes and max data rate.
>
> Fixes: c943b4948b58 ("drm/msm/dp: add displayPort driver support")
> Signed-off-by: Abhinav Kumar <quic_abhinavk@xxxxxxxxxxx>
> ---
> drivers/gpu/drm/msm/dp/dp_panel.c | 7 +++++--
> 1 file changed, 5 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/gpu/drm/msm/dp/dp_panel.c b/drivers/gpu/drm/msm/dp/dp_panel.c
> index a916b5f3b317..56ce5e4008f8 100644
> --- a/drivers/gpu/drm/msm/dp/dp_panel.c
> +++ b/drivers/gpu/drm/msm/dp/dp_panel.c
> @@ -397,6 +397,7 @@ int dp_panel_init_panel_info(struct dp_panel *dp_panel)
> {
> struct drm_display_mode *drm_mode;
> struct dp_panel_private *panel;
> + u32 max_supported_bpp;
>
> drm_mode = &dp_panel->dp_mode.drm_mode;
>
> @@ -423,8 +424,10 @@ int dp_panel_init_panel_info(struct dp_panel *dp_panel)
> drm_mode->clock);
> drm_dbg_dp(panel->drm_dev, "bpp = %d\n", dp_panel->dp_mode.bpp);
>
> - dp_panel->dp_mode.bpp = max_t(u32, 18,
> - min_t(u32, dp_panel->dp_mode.bpp, 30));
> + max_supported_bpp = dp_panel_get_mode_bpp(dp_panel, dp_panel->dp_mode.bpp,
> + dp_panel->dp_mode.drm_mode.clock);
> + dp_panel->dp_mode.bpp = max_t(u32, 18, max_supported_bpp);
I think that in mode_valid() the driver should filter out modes that
result in BPP being less than 18. Then the max_t can be dropped
completely.
Nevertheless this indeed fixes an issue with the screen corruption,
this is great!
Tested-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx> # SM8350-HDK
> +
> drm_dbg_dp(panel->drm_dev, "updated bpp = %d\n",
> dp_panel->dp_mode.bpp);
>
> --
> 2.44.0
>
--
With best wishes
Dmitry
