Add the audio codec sub-device. This sub-device is used to set the
optional voltage values according to the hardware.
The properties are:
- Setup of microphone bias voltage.
- Setup of the speaker pin pull-down.
Also, add the audio power supply property which is dedicated for
the audio codec sub-device.
Signed-off-by: Alexandre Mergnat <amergnat@xxxxxxxxxxxx>
---
.../devicetree/bindings/mfd/mediatek,mt6357.yaml | 21 +++++++++++++++++++++
1 file changed, 21 insertions(+)
diff --git a/Documentation/devicetree/bindings/mfd/mediatek,mt6357.yaml b/Documentation/devicetree/bindings/mfd/mediatek,mt6357.yaml
index 37423c2e0fdf..b67fbe0e7a63 100644
--- a/Documentation/devicetree/bindings/mfd/mediatek,mt6357.yaml
+++ b/Documentation/devicetree/bindings/mfd/mediatek,mt6357.yaml
@@ -37,6 +37,24 @@ properties:
"#interrupt-cells":
const: 2
+ mediatek,hp-pull-down:
+ description:
+ Earphone driver positive output stage short to
+ the audio reference ground.
+ type: boolean
+
+ mediatek,micbias0-microvolt:
+ description: Selects MIC Bias 0 output voltage.
+ enum: [1700000, 1800000, 1900000, 2000000,
+ 2100000, 2500000, 2600000, 2700000]
+ default: 1700000
+
+ mediatek,micbias1-microvolt:
+ description: Selects MIC Bias 1 output voltage.
+ enum: [1700000, 1800000, 1900000, 2000000,
+ 2100000, 2500000, 2600000, 2700000]
+ default: 1700000
+
regulators:
type: object
$ref: /schemas/regulator/mediatek,mt6357-regulator.yaml
@@ -83,6 +101,9 @@ examples:
interrupt-controller;
#interrupt-cells = <2>;
+ mediatek,micbias0-microvolt = <1700000>;
+ mediatek,micbias1-microvolt = <1700000>;
+
regulators {
mt6357_vproc_reg: buck-vproc {
regulator-name = "vproc";
--
2.25.1
