Add the 'sam9x75-mipi-dsi' compatible binding, which describes the Microchip's specific wrapper for the Synopsys DesignWare MIPI DSI HOST Controller for the sam9x75 series System-on-Chip (SoC) devices. Signed-off-by: Manikandan Muralidharan <manikandan.m@xxxxxxxxxxxxx> --- changes in v2: - List the clocks with description - remove describing 'remove-endpoint' properties - remove unused label, node and fix example DT indentation - cosmetic fixes --- .../bridge/microchip,sam9x75-mipi-dsi.yaml | 116 ++++++++++++++++++ 1 file changed, 116 insertions(+) create mode 100644 Documentation/devicetree/bindings/display/bridge/microchip,sam9x75-mipi-dsi.yaml diff --git a/Documentation/devicetree/bindings/display/bridge/microchip,sam9x75-mipi-dsi.yaml b/Documentation/devicetree/bindings/display/bridge/microchip,sam9x75-mipi-dsi.yaml new file mode 100644 index 000000000000..ef8541d05219 --- /dev/null +++ b/Documentation/devicetree/bindings/display/bridge/microchip,sam9x75-mipi-dsi.yaml @@ -0,0 +1,116 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/bridge/microchip,sam9x75-mipi-dsi.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Microchip SAM9X75 MIPI DSI Controller + +maintainers: + - Manikandan Muralidharan <manikandan.m@xxxxxxxxxxxxx> + +description: + Microchip specific extensions or wrapper to the Synopsys Designware MIPI DSI. + The MIPI Display Serial Interface (DSI) Host Controller implements all + protocol functions defined in the MIPI DSI Specification.The DSI Host + provides an interface between the LCD Controller (LCDC) and the MIPI D-PHY, + allowing communication with a DSI-compliant display. + +allOf: + - $ref: /schemas/display/dsi-controller.yaml# + +properties: + compatible: + const: microchip,sam9x75-mipi-dsi + + reg: + maxItems: 1 + + clocks: + items: + - description: + Peripheral clock for the hardware block functionality + - description: + Generic clock to drive the D-PHY PLL block + + clock-names: + items: + - const: pclk + - const: refclk + + microchip,sfr: + $ref: /schemas/types.yaml#/definitions/phandle + description: + phandle to Special Function Register (SFR) node.To enable the DSI/CSI + selection bit in SFR's ISS Configuration Register. + + ports: + $ref: /schemas/graph.yaml#/properties/ports + + properties: + port@0: + $ref: /schemas/graph.yaml#/$defs/port-base + unevaluatedProperties: false + description: + DSI Input port node, connected to the LCDC RGB output port. + + properties: + endpoint: + $ref: /schemas/media/video-interfaces.yaml# + unevaluatedProperties: false + + port@1: + $ref: /schemas/graph.yaml#/$defs/port-base + unevaluatedProperties: false + description: + DSI Output port node, connected to a panel or a bridge input port. + + properties: + endpoint: + $ref: /schemas/media/video-interfaces.yaml# + unevaluatedProperties: false + +required: + - compatible + - reg + - clocks + - clock-names + - ports + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/at91.h> + #include <dt-bindings/gpio/gpio.h> + + dsi@f8054000 { + compatible = "microchip,sam9x75-mipi-dsi"; + reg = <0xf8054000 0x200>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 54>, <&pmc PMC_TYPE_GCK 55>; + clock-names = "pclk", "refclk"; + microchip,sfr = <&sfr>; + + #address-cells = <1>; + #size-cells = <0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + dsi_in: endpoint { + remote-endpoint = <&hlcdc_panel_output>; + }; + }; + + port@1 { + reg = <1>; + dsi_out: endpoint { + remote-endpoint = <&mipi_in_panel>; + }; + }; + }; + }; +... -- 2.25.1
