On 04.07.2024 11:48, Manikandan Muralidharan wrote:
> Add the Microchip's DSI controller wrapper driver that uses
> the Synopsys DesignWare MIPI DSI host controller bridge.
>
> Signed-off-by: Manikandan Muralidharan <manikandan.m@xxxxxxxxxxxxx>
> ---
> drivers/gpu/drm/bridge/Kconfig | 8 +
> drivers/gpu/drm/bridge/Makefile | 1 +
> drivers/gpu/drm/bridge/dw-mipi-dsi-mchp.c | 544 ++++++++++++++++++++++
> 3 files changed, 553 insertions(+)
> create mode 100644 drivers/gpu/drm/bridge/dw-mipi-dsi-mchp.c
>
> diff --git a/drivers/gpu/drm/bridge/Kconfig b/drivers/gpu/drm/bridge/Kconfig
> index c621be1a99a8..459ad9768234 100644
> --- a/drivers/gpu/drm/bridge/Kconfig
> +++ b/drivers/gpu/drm/bridge/Kconfig
> @@ -196,6 +196,14 @@ config DRM_MICROCHIP_LVDS_SERIALIZER
> help
> Support for Microchip's LVDS serializer.
>
> +config DRM_MICROCHIP_DW_MIPI_DSI
> + tristate "Microchip specific extensions for Synopsys DW MIPI DSI"
> + depends on DRM_ATMEL_HLCDC
> + select DRM_DW_MIPI_DSI
> + help
> + This selects support for Microchip's SoC specific extensions
> + for the Synopsys DesignWare dsi driver.
> +
> config DRM_NWL_MIPI_DSI
> tristate "Northwest Logic MIPI DSI Host controller"
> depends on DRM
> diff --git a/drivers/gpu/drm/bridge/Makefile b/drivers/gpu/drm/bridge/Makefile
> index 7df87b582dca..aff5052100b9 100644
> --- a/drivers/gpu/drm/bridge/Makefile
> +++ b/drivers/gpu/drm/bridge/Makefile
> @@ -14,6 +14,7 @@ obj-$(CONFIG_DRM_LONTIUM_LT9611UXC) += lontium-lt9611uxc.o
> obj-$(CONFIG_DRM_LVDS_CODEC) += lvds-codec.o
> obj-$(CONFIG_DRM_MEGACHIPS_STDPXXXX_GE_B850V3_FW) += megachips-stdpxxxx-ge-b850v3-fw.o
> obj-$(CONFIG_DRM_MICROCHIP_LVDS_SERIALIZER) += microchip-lvds.o
> +obj-$(CONFIG_DRM_MICROCHIP_DW_MIPI_DSI) += dw-mipi-dsi-mchp.o
> obj-$(CONFIG_DRM_NXP_PTN3460) += nxp-ptn3460.o
> obj-$(CONFIG_DRM_PARADE_PS8622) += parade-ps8622.o
> obj-$(CONFIG_DRM_PARADE_PS8640) += parade-ps8640.o
> diff --git a/drivers/gpu/drm/bridge/dw-mipi-dsi-mchp.c b/drivers/gpu/drm/bridge/dw-mipi-dsi-mchp.c
> new file mode 100644
> index 000000000000..d2c4525677ab
> --- /dev/null
> +++ b/drivers/gpu/drm/bridge/dw-mipi-dsi-mchp.c
> @@ -0,0 +1,544 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +/*
> + * Copyright (C) 2024 Microchip Technology Inc. and its subsidiaries
> + *
> + * Author: Manikandan Muralidharan <manikandan.m@xxxxxxxxxxxxx>
> + *
> + */
> +
> +#include <drm/bridge/dw_mipi_dsi.h>
> +#include <drm/drm_mipi_dsi.h>
> +#include <drm/drm_print.h>
> +#include <linux/bits.h>
> +#include <linux/clk.h>
> +#include <linux/io.h>
> +#include <linux/mfd/syscon.h>
> +#include <linux/mod_devicetable.h>
> +#include <linux/of_device.h>
> +#include <linux/platform_device.h>
> +#include <linux/regmap.h>
> +#include <linux/of.h>
> +
> +#define DSI_PLL_REF_CLK 24000000
> +
> +#define DSI_PWR_UP 0x04
> +#define HOST_RESET BIT(0)
> +#define HOST_PWRUP 0
> +
> +#define DSI_PHY_RSTZ 0xa0
> +#define PHY_SHUTDOWNZ 0
> +
> +#define DSI_PHY_TST_CTRL0 0xb4
> +#define PHY_TESTCLK BIT(1)
> +#define PHY_UNTESTCLK 0
> +#define PHY_TESTCLR BIT(0)
> +#define PHY_UNTESTCLR 0
> +
> +#define DSI_PHY_TST_CTRL1 0xb8
> +#define PHY_TESTEN BIT(16)
> +#define PHY_UNTESTEN 0
> +#define PHY_TESTDOUT(n) (((n) & 0xff) << 8)
> +#define PHY_TESTDIN(n) (((n) & 0xff) << 0)
These 2 looks like FIELD_PREP() candidates.
> +
> +#define BYPASS_VCO_RANGE BIT(7)
> +#define VCO_RANGE_CON_SEL(val) (((val) & 0x7) << 3)
This, too.
> +#define VCO_IN_CAP_CON_LOW BIT(1)
> +
> +#define CP_CURRENT_0 0x2
> +#define CP_CURRENT_1 0x4
> +#define CP_CURRENT_2 0x5
> +#define CP_CURRENT_3 0x6
> +#define CP_CURRENT_4 0x7
> +#define CP_CURRENT_5 0x8
> +#define CP_CURRENT_6 0xc
> +#define CP_CURRENT_SEL(val) ((val) & 0xf)
This, too.
> +#define CP_PROGRAM_EN BIT(7)
> +
> +#define LPF_RESISTORS_18KOHM 0x0
> +#define LPF_RESISTORS_15_6KOHM 0x1
> +#define LPF_RESISTORS_15KOHM 0x2
> +#define LPF_RESISTORS_14_4KOHM 0x4
> +#define LPF_RESISTORS_12_8KOHM 0x8
> +#define LPF_RESISTORS_11_4KOHM 0x10
> +#define LPF_RESISTORS_10_5KOHM 0x20
Some of these are unsused.
> +#define LPF_PROGRAM_EN BIT(6)
> +#define LPF_RESISTORS_SEL(val) ((val) & 0x3f)
This, too
> +
> +#define HSFREQRANGE_SEL(val) (((val) & 0x3f) << 1)
Unused
> +
> +#define INPUT_DIVIDER(val) (((val) - 1) & 0x7f)
> +#define LOW_PROGRAM_EN 0
> +#define HIGH_PROGRAM_EN BIT(7)
> +#define LOOP_DIV_LOW_SEL(val) (((val) - 1) & 0x1f)
> +#define LOOP_DIV_HIGH_SEL(val) ((((val) - 1) >> 5) & 0xf)
> +#define PLL_LOOP_DIV_EN BIT(5)
> +#define PLL_INPUT_DIV_EN BIT(4)
> +
> +#define PLL_BIAS_CUR_SEL_CAP_VCO_CONTROL 0x10
> +#define PLL_CP_CONTROL_PLL_LOCK_BYPASS 0x11
> +#define PLL_LPF_AND_CP_CONTROL 0x12
> +#define PLL_INPUT_DIVIDER_RATIO 0x17
> +#define PLL_LOOP_DIVIDER_RATIO 0x18
> +#define PLL_INPUT_AND_LOOP_DIVIDER_RATIOS_CONTROL 0x19
> +
> +#define SFR_ISS_CFG 0x240
> +#define ISS_CFG_DSI_MODE 1
> +
> +struct dw_mipi_dsi_mchp_chip_data {
> + unsigned int max_data_lanes;
> + struct dw_mipi_dsi_phy_ops *phy_ops;
pointer first to avoid padding, if any.
> +};
> +
> +struct dw_mipi_dsi_mchp {
> + struct device *dev;
> + void __iomem *base;
> + struct dw_mipi_dsi_plat_data pdata;
> + struct dw_mipi_dsi *dsi;
> +
> + /* needed for PLL config */
> + unsigned int lane_mbps;
> + u16 input_div;
> + u16 feedback_div;
> + u32 format;
> +
> + struct clk *pclk;
> + struct clk *pllref_clk;
same here.
> +};
> +
> +struct dphy_pll_parameter_map {
> + unsigned int max_mbps;
> + u8 hsfreqrange;
> + u8 icpctrl;
> + u8 lpfctrl;
> +};
> +
> +static const struct dphy_pll_parameter_map dppa_map[] = {
> + { 89, 0x00, CP_CURRENT_1, LPF_RESISTORS_11_4KOHM },
> + { 99, 0x20, CP_CURRENT_1, LPF_RESISTORS_11_4KOHM },
> + { 109, 0x40, CP_CURRENT_1, LPF_RESISTORS_11_4KOHM },
> + { 129, 0x02, CP_CURRENT_5, LPF_RESISTORS_12_8KOHM },
> + { 139, 0x22, CP_CURRENT_5, LPF_RESISTORS_12_8KOHM },
> + { 149, 0x42, CP_CURRENT_5, LPF_RESISTORS_12_8KOHM },
> + { 169, 0x04, CP_CURRENT_6, LPF_RESISTORS_12_8KOHM },
> + { 179, 0x24, CP_CURRENT_6, LPF_RESISTORS_12_8KOHM },
> + { 199, 0x44, CP_CURRENT_6, LPF_RESISTORS_12_8KOHM },
> + { 219, 0x06, CP_CURRENT_6, LPF_RESISTORS_12_8KOHM },
> + { 239, 0x26, CP_CURRENT_6, LPF_RESISTORS_12_8KOHM },
> + { 249, 0x46, CP_CURRENT_6, LPF_RESISTORS_12_8KOHM },
> + { 269, 0x08, CP_CURRENT_0, LPF_RESISTORS_12_8KOHM },
> + { 299, 0x28, CP_CURRENT_0, LPF_RESISTORS_12_8KOHM },
> + { 329, 0x0a, CP_CURRENT_2, LPF_RESISTORS_12_8KOHM },
> + { 359, 0x2a, CP_CURRENT_2, LPF_RESISTORS_12_8KOHM },
> + { 399, 0x4a, CP_CURRENT_2, LPF_RESISTORS_12_8KOHM },
> + { 449, 0x0C, CP_CURRENT_2, LPF_RESISTORS_15_6KOHM },
> + { 499, 0x2c, CP_CURRENT_2, LPF_RESISTORS_15_6KOHM },
> + { 549, 0x0e, CP_CURRENT_3, LPF_RESISTORS_11_4KOHM },
> + { 599, 0x2e, CP_CURRENT_3, LPF_RESISTORS_11_4KOHM },
> + { 649, 0x10, CP_CURRENT_3, LPF_RESISTORS_14_4KOHM },
> + { 699, 0x30, CP_CURRENT_3, LPF_RESISTORS_14_4KOHM },
> + { 749, 0x12, CP_CURRENT_3, LPF_RESISTORS_14_4KOHM },
> + { 799, 0x32, CP_CURRENT_3, LPF_RESISTORS_14_4KOHM },
> + { 849, 0x52, CP_CURRENT_3, LPF_RESISTORS_14_4KOHM },
> + { 899, 0x72, CP_CURRENT_3, LPF_RESISTORS_14_4KOHM },
> + { 949, 0x14, CP_CURRENT_4, LPF_RESISTORS_11_4KOHM },
> + {1000, 0x34, CP_CURRENT_4, LPF_RESISTORS_11_4KOHM }
> +};
> +
> +struct hstt {
> + unsigned int maxfreq;
> + struct dw_mipi_dsi_dphy_timing timing;
> +};
> +
> +#define HSTT(_maxfreq, _c_lp2hs, _c_hs2lp, _d_lp2hs, _d_hs2lp) \
> +{ \
> + .maxfreq = _maxfreq, \
> + .timing = { \
> + .clk_lp2hs = _c_lp2hs, \
> + .clk_hs2lp = _c_hs2lp, \
> + .data_lp2hs = _d_lp2hs, \
> + .data_hs2lp = _d_hs2lp, \
> + } \
> +}
> +
> +struct hstt hstt_table[] = {
static const
> + HSTT(90, 32, 20, 26, 13),
> + HSTT(100, 35, 23, 28, 14),
> + HSTT(110, 32, 22, 26, 13),
> + HSTT(130, 31, 20, 27, 13),
> + HSTT(140, 33, 22, 26, 14),
> + HSTT(150, 33, 21, 26, 14),
> + HSTT(170, 32, 20, 27, 13),
> + HSTT(180, 36, 23, 30, 15),
> + HSTT(200, 40, 22, 33, 15),
> + HSTT(220, 40, 22, 33, 15),
> + HSTT(240, 44, 24, 36, 16),
> + HSTT(250, 48, 24, 38, 17),
> + HSTT(270, 48, 24, 38, 17),
> + HSTT(300, 50, 27, 41, 18),
> + HSTT(330, 56, 28, 45, 18),
> + HSTT(360, 59, 28, 48, 19),
> + HSTT(400, 61, 30, 50, 20),
> + HSTT(450, 67, 31, 55, 21),
> + HSTT(500, 73, 31, 59, 22),
> + HSTT(550, 79, 36, 63, 24),
> + HSTT(600, 83, 37, 68, 25),
> + HSTT(650, 90, 38, 73, 27),
> + HSTT(700, 95, 40, 77, 28),
> + HSTT(750, 102, 40, 84, 28),
> + HSTT(800, 106, 42, 87, 30),
> + HSTT(850, 113, 44, 93, 31),
> + HSTT(900, 118, 47, 98, 32),
> + HSTT(950, 124, 47, 102, 34),
> + HSTT(1000, 130, 49, 107, 35),
> +};
> +
> +static int max_mbps_to_parameter(unsigned int max_mbps)
> +{
> + int index;
> +
> + for (index = 0; index < ARRAY_SIZE(dppa_map); index++)
> + if (dppa_map[index].max_mbps >= max_mbps)
> + return index;
> +
> + return -EINVAL;
> +}
> +
> +static inline void dsi_write(struct dw_mipi_dsi_mchp *dsi, u32 reg, u32 val)
The name here looks too generic, prefixing it with something like mchp may
be better to avoid any potential conflict. Valid for the rest of functions
in this file.
> +{
> + writel(val, dsi->base + reg);
> +}
> +
> +static inline u32 dsi_read(struct dw_mipi_dsi_mchp *dsi, u32 reg)
> +{
> + return readl(dsi->base + reg);
> +}
> +
> +static void dw_mipi_dsi_phy_write(struct dw_mipi_dsi_mchp *dsi,
> + u8 test_code,
> + u8 test_data)
> +{
> + /* General DPHY control operation */
> +
> + dsi_write(dsi, DSI_PHY_TST_CTRL0, PHY_TESTCLK | PHY_UNTESTCLR);
> + dsi_write(dsi, DSI_PHY_TST_CTRL1, PHY_TESTEN | PHY_TESTDOUT(1) |
> + PHY_TESTDIN(test_code));
> + dsi_write(dsi, DSI_PHY_TST_CTRL0, PHY_UNTESTCLK | PHY_UNTESTCLR);
> + dsi_write(dsi, DSI_PHY_TST_CTRL1, PHY_UNTESTEN | PHY_TESTDOUT(0) |
> + PHY_TESTDIN(test_data));
> + dsi_write(dsi, DSI_PHY_TST_CTRL0, PHY_TESTCLK | PHY_UNTESTCLR);
> + dsi_write(dsi, DSI_PHY_TST_CTRL0, PHY_UNTESTCLK | PHY_UNTESTCLR);
> +}
> +
> +static int dw_mipi_dsi_mchp_init(void *priv_data)
> +{
> + struct dw_mipi_dsi_mchp *dsi = priv_data;
> + int index, vco, ret = 0;
> +
> + /*
> + * Get vco from frequency(lane_mbps)
> + * vco frequency table
> + * 000 - between 80 and 200 MHz
> + * 001 - between 200 and 300 MHz
> + * 010 - between 300 and 500 MHz
> + * 011 - between 500 and 700 MHz
> + * 100 - between 700 and 900 MHz
> + * 101 - between 900 and 1000 MHz
> + */
> + vco = (dsi->lane_mbps < 200) ? 0 : (dsi->lane_mbps + 100) / 200;
> +
> + index = max_mbps_to_parameter(dsi->lane_mbps);
> + if (index < 0) {
> + dev_err(dsi->dev,
> + "failed to get parameter for %dmbps clock\n",
> + dsi->lane_mbps);
> + return index;
> + }
> +
> + /* D-PHY in Shutdown mode */
> + dsi_write(dsi, DSI_PHY_RSTZ, PHY_SHUTDOWNZ);
> +
> + dw_mipi_dsi_phy_write(dsi, PLL_BIAS_CUR_SEL_CAP_VCO_CONTROL,
> + BYPASS_VCO_RANGE |
> + VCO_RANGE_CON_SEL(vco) |
> + VCO_IN_CAP_CON_LOW);
> +
> + dw_mipi_dsi_phy_write(dsi, PLL_CP_CONTROL_PLL_LOCK_BYPASS,
> + CP_CURRENT_SEL(dppa_map[index].icpctrl));
> +
> + dw_mipi_dsi_phy_write(dsi, PLL_LPF_AND_CP_CONTROL,
> + CP_PROGRAM_EN | LPF_PROGRAM_EN |
> + LPF_RESISTORS_SEL(dppa_map[index].lpfctrl));
> +
> + dw_mipi_dsi_phy_write(dsi, PLL_INPUT_AND_LOOP_DIVIDER_RATIOS_CONTROL,
> + PLL_LOOP_DIV_EN | PLL_INPUT_DIV_EN);
> +
> + dw_mipi_dsi_phy_write(dsi, PLL_INPUT_DIVIDER_RATIO,
> + INPUT_DIVIDER(dsi->input_div));
> +
> + dw_mipi_dsi_phy_write(dsi, PLL_LOOP_DIVIDER_RATIO,
> + LOOP_DIV_LOW_SEL(dsi->feedback_div) |
> + LOW_PROGRAM_EN);
> +
> + dw_mipi_dsi_phy_write(dsi, PLL_LOOP_DIVIDER_RATIO,
> + LOOP_DIV_HIGH_SEL(dsi->feedback_div) |
> + HIGH_PROGRAM_EN);
> +
> + return ret;
> +}
> +
> +static int dw_mipi_dsi_mchp_get_lane_mbps(void *priv_data,
> + const struct drm_display_mode *mode,
> + unsigned long mode_flags, u32 lanes,
> + u32 format, unsigned int *lane_mbps)
> +{
> + struct dw_mipi_dsi_mchp *dsi = priv_data;
> + unsigned long best_freq, fvco_min, fvco_max, fin, fout;
> + unsigned long min_delta = ULONG_MAX, delta;
> + unsigned int mpclk, target_mbps, desired_mbps;
> + unsigned int max_mbps = dppa_map[ARRAY_SIZE(dppa_map) - 1].max_mbps;
> + unsigned int bpp, min_prediv, max_prediv;
> + unsigned int _fbdiv, best_fbdiv, _prediv, best_prediv;
> + u64 freq_factor;
> +
> + dsi->format = format;
> + bpp = mipi_dsi_pixel_format_to_bpp(dsi->format);
> + if (bpp < 0) {
> + dev_err(dsi->dev,
> + "failed to get bpp for pixel format %d\n",
> + dsi->format);
> + return bpp;
> + }
> +
> + mpclk = DIV_ROUND_UP(mode->clock, MSEC_PER_SEC);
> + if (mpclk) {
> + /* take 1/0.8, since mbps must be bigger than bandwidth of RGB */
> + desired_mbps = mpclk * (bpp / lanes) * 10 / 8;
> + if (desired_mbps < max_mbps) {
> + target_mbps = desired_mbps;
> + } else {
> + dev_err(dsi->dev,
> + "DPHY clock frequency is out of range\n");
> + return -ERANGE;
> + }
> + }
> +
> + fin = clk_get_rate(dsi->pllref_clk);
> + fout = target_mbps * USEC_PER_SEC;
> +
> + /* constraint: 5Mhz <= Fref / N <= 40MHz */
> + min_prediv = DIV_ROUND_UP(fin, 40 * USEC_PER_SEC);
> + max_prediv = fin / (5 * USEC_PER_SEC);
> +
> + /* constraint: 80MHz <= Fvco <= 1000Mhz */
> + fvco_min = 80 * USEC_PER_SEC;
> + fvco_max = 1000 * USEC_PER_SEC;
> +
> + best_freq = 0;
Could be added to the initialization list of for()
> + for (_prediv = min_prediv; _prediv <= max_prediv; _prediv++) {
> + /* Fvco = Fref * M / N */
> + freq_factor = (uint64_t)fout * _prediv;
u64?
> + do_div(freq_factor, fin);
> + _fbdiv = freq_factor;
> + /*
> + * Due to the use of a "by 2 pre-scaler," the range of the
> + * feedback multiplication value M is limited to even division
> + * numbers, and m must be greater than 6, not bigger than 512.
> + */
> + if (_fbdiv < 6 || _fbdiv > 512)
> + continue;
> +
> + _fbdiv += _fbdiv % 2;
> +
> + freq_factor = (uint64_t)_fbdiv * fin;
u64?
> + do_div(freq_factor, _prediv);
> + if (freq_factor < fvco_min || freq_factor > fvco_max)
> + continue;
> +
> + delta = abs(fout - freq_factor);
> + if (delta < min_delta) {
> + best_prediv = _prediv;
> + best_fbdiv = _fbdiv;
> + min_delta = delta;
> + best_freq = freq_factor;
> + }
> + }
> +
> + if (best_freq) {
> + dsi->lane_mbps = DIV_ROUND_UP(best_freq, USEC_PER_SEC);
> + *lane_mbps = dsi->lane_mbps;
> + dsi->input_div = best_prediv;
> + dsi->feedback_div = best_fbdiv;
> + } else {
> + dev_err(dsi->dev, "Can not find best_freq for DPHY\n");
> + return -EINVAL;
> + }
> +
> + return 0;
> +}
> +
> +static int dw_mipi_dsi_mchp_get_timing(void *priv_data, unsigned int lane_mbps,
> + struct dw_mipi_dsi_dphy_timing *timing)
> +{
> + int index;
Could be directly declared in the for ()
> +
> + for (index = 0; index < ARRAY_SIZE(hstt_table); index++)
> + if (lane_mbps < hstt_table[index].maxfreq)
> + break;
> +
> + if (index == ARRAY_SIZE(hstt_table))
> + index--;
> +
> + *timing = hstt_table[index].timing;
> +
> + return 0;
> +}
> +
> +static void dw_mipi_dsi_mchp_power_on(void *priv_data)
> +{
> + struct dw_mipi_dsi_mchp *dsi = priv_data;
> +
> + /* Enable the DSI wrapper */
> + dsi_write(dsi, DSI_PWR_UP, HOST_PWRUP);
> +}
> +
> +static void dw_mipi_dsi_mchp_power_off(void *priv_data)
> +{
> + struct dw_mipi_dsi_mchp *dsi = priv_data;
> +
> + /* Disable the DSI wrapper */
> + dsi_write(dsi, DSI_PWR_UP, HOST_RESET);
> +}
> +
> +struct dw_mipi_dsi_phy_ops dw_mipi_dsi_mchp_phy_ops = {
> + .init = dw_mipi_dsi_mchp_init,
> + .power_on = dw_mipi_dsi_mchp_power_on,
> + .power_off = dw_mipi_dsi_mchp_power_off,
> + .get_lane_mbps = dw_mipi_dsi_mchp_get_lane_mbps,
> + .get_timing = dw_mipi_dsi_mchp_get_timing,
> +};
> +
> +static int dw_mipi_dsi_mchp_probe(struct platform_device *pdev)
> +{
> + struct dw_mipi_dsi_mchp *dsi;
> + struct resource *res;
> + struct regmap *sfr;
> + const struct dw_mipi_dsi_mchp_chip_data *cdata;
> + int ret;
> +
> + dsi = devm_kzalloc(&pdev->dev, sizeof(*dsi), GFP_KERNEL);
> + if (!dsi)
> + return -ENOMEM;
> +
> + dsi->dev = &pdev->dev;
> + cdata = of_device_get_match_data(dsi->dev);
> +
> + res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> + dsi->base = devm_ioremap_resource(&pdev->dev, res);
> + if (IS_ERR(dsi->base)) {
> + ret = PTR_ERR(dsi->base);
> + dev_err(dsi->dev, "Unable to get DSI Base address: %d\n", ret);
> + return ret;
> + }
> +
> + dsi->pclk = devm_clk_get(&pdev->dev, "pclk");
> + if (IS_ERR(dsi->pclk)) {
> + ret = PTR_ERR(dsi->pclk);
> + dev_err(dsi->dev, "Unable to get pclk: %d\n", ret);
> + return ret;
> + }
> +
> + dsi->pllref_clk = devm_clk_get(&pdev->dev, "refclk");
> + if (IS_ERR(dsi->pllref_clk)) {
> + ret = PTR_ERR(dsi->pllref_clk);
> + dev_err(dsi->dev, "Unable to get DSI PHY PLL reference clock: %d\n",
> + ret);
> + return ret;
> + }
> +
> + clk_set_rate(dsi->pllref_clk, DSI_PLL_REF_CLK);
> + if (clk_get_rate(dsi->pllref_clk) != DSI_PLL_REF_CLK) {
> + dev_err(dsi->dev, "Failed to set DSI PHY PLL reference clock\n");
> + return -EINVAL;
> + }
> +
> + ret = clk_prepare_enable(dsi->pllref_clk);
> + if (ret) {
> + dev_err(dsi->dev, "Failed to enable DSI PHY PLL reference clock: %d\n",
> + ret);
> + return ret;
> + }
> +
> + sfr = syscon_regmap_lookup_by_phandle(pdev->dev.of_node, "microchip,sfr");
> + if (IS_ERR_OR_NULL(sfr)) {
> + ret = PTR_ERR(sfr);
> + dev_err(dsi->dev, "Failed to get handle on Special Function Register: %d\n",
> + ret);
> + goto err_dsi_probe;
> + }
> + /* Select DSI in SFR's ISS Configuration Register */
> + ret = regmap_write(sfr, SFR_ISS_CFG, ISS_CFG_DSI_MODE);
> + if (ret) {
> + dev_err(dsi->dev, "Failed to enable DSI in SFR ISS configuration register: %d\n",
> + ret);
> + goto err_dsi_probe;
> + }
> +
> + dsi->pdata.base = dsi->base;
> + dsi->pdata.max_data_lanes = cdata->max_data_lanes;
> + dsi->pdata.phy_ops = cdata->phy_ops;
> + dsi->pdata.priv_data = dsi;
> + platform_set_drvdata(pdev, dsi);
> +
> + /* call synopsis probe */
> + dsi->dsi = dw_mipi_dsi_probe(pdev, &dsi->pdata);
> + if (IS_ERR(dsi->dsi)) {
> + ret = PTR_ERR(dsi->dsi);
> + dev_err(dsi->dev, "Failed to initialize mipi dsi host: %d\n", ret);
> + goto err_dsi_probe;
> + }
> +
> + return 0;
> +
> +err_dsi_probe:
> + clk_disable_unprepare(dsi->pllref_clk);
> +
> + return ret;
> +}
> +
> +static int dw_mipi_dsi_mchp_remove(struct platform_device *pdev)
> +{
> + struct dw_mipi_dsi_mchp *dsi = platform_get_drvdata(pdev);
> +
> + dw_mipi_dsi_remove(dsi->dsi);
> + clk_disable_unprepare(dsi->pllref_clk);
> +
> + return 0;
> +}
> +
> +static const struct dw_mipi_dsi_mchp_chip_data sam9x75_chip_data = {
> + .max_data_lanes = 4,
> + .phy_ops = &dw_mipi_dsi_mchp_phy_ops,
> +};
> +
> +static const struct of_device_id dw_mipi_dsi_mchp_dt_ids[] = {
> + {
> + .compatible = "microchip,sam9x75-mipi-dsi",
> + .data = &sam9x75_chip_data,
> + },
> + { /* sentinel */ }
> +};
> +MODULE_DEVICE_TABLE(of, dw_mipi_dsi_mchp_dt_ids);
> +
> +struct platform_driver dw_mipi_dsi_mchp_driver = {
> + .probe = dw_mipi_dsi_mchp_probe,
> + .remove = dw_mipi_dsi_mchp_remove,
> + .driver = {
> + .of_match_table = dw_mipi_dsi_mchp_dt_ids,
> + .name = "dw-mipi-dsi-mchp",
> + },
> +};
> +module_platform_driver(dw_mipi_dsi_mchp_driver);
> +
> +MODULE_AUTHOR("Manikandan Muralidharan <manikandan.m@xxxxxxxxxxxxx>");
> +MODULE_DESCRIPTION("Microchip DW MIPI DSI controller wrapper driver");
> +MODULE_LICENSE("GPL");
