Disable the call to qcom_scm_gpu_init_regs() for a730 and a740
after init failures on the HDK8550 and HDK8450 platforms:
msm_dpu ae01000.display-controller: failed to load adreno gpu
msm_dpu ae01000.display-controller: failed to bind 3d00000.gpu (ops a3xx_ops [msm]): -5
msm_dpu ae01000.display-controller: adev bind failed: -5
While debugging, it happens the call to:
qcom_scm_gpu_init_regs(QCOM_SCM_GPU_ALWAYS_EN_REQ)
returns -5 and makes the gpu fail to initialize.
Remove the scm call since it's not done downstream either and
works fine without.
Fixes: 14b27d5df3ea ("drm/msm/a7xx: Initialize a750 "software fuse"")
Signed-off-by: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
---
drivers/gpu/drm/msm/adreno/a6xx_gpu.c | 11 +++--------
1 file changed, 3 insertions(+), 8 deletions(-)
diff --git a/drivers/gpu/drm/msm/adreno/a6xx_gpu.c b/drivers/gpu/drm/msm/adreno/a6xx_gpu.c
index c98cdb1e9326..3ba45b804983 100644
--- a/drivers/gpu/drm/msm/adreno/a6xx_gpu.c
+++ b/drivers/gpu/drm/msm/adreno/a6xx_gpu.c
@@ -1741,14 +1741,9 @@ static int a7xx_cx_mem_init(struct a6xx_gpu *a6xx_gpu)
REG_A7XX_CX_MISC_SW_FUSE_VALUE);
adreno_gpu->has_ray_tracing =
!!(fuse_val & A7XX_CX_MISC_SW_FUSE_VALUE_RAYTRACING);
- } else {
- if (adreno_is_a740(adreno_gpu)) {
- /* Raytracing is always enabled on a740 */
- adreno_gpu->has_ray_tracing = true;
- }
-
- if (qcom_scm_is_available())
- return qcom_scm_gpu_init_regs(QCOM_SCM_GPU_ALWAYS_EN_REQ);
+ } else if (adreno_is_a740(adreno_gpu)) {
+ /* Raytracing is always enabled on a740 */
+ adreno_gpu->has_ray_tracing = true;
}
return 0;
---
base-commit: 62c97045b8f720c2eac807a5f38e26c9ed512371
change-id: 20240626-topic-sm8x50-upstream-fix-a730-a730-gpu-raytracing-init-46ac3f4cdd29
Best regards,
--
Neil Armstrong <neil.armstrong@xxxxxxxxxx>
