Replace FB_BLANK_ constants with their counterparts from the backlight subsystem. The values are identical, so there's no change in functionality. Signed-off-by: Thomas Zimmermann <tzimmermann@xxxxxxx> --- drivers/video/backlight/pwm_bl.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/video/backlight/pwm_bl.c b/drivers/video/backlight/pwm_bl.c index 61d30bc98eea..e942908d1275 100644 --- a/drivers/video/backlight/pwm_bl.c +++ b/drivers/video/backlight/pwm_bl.c @@ -426,7 +426,7 @@ static int pwm_backlight_initial_power_state(const struct pwm_bl_data *pb) /* Not booted with device tree or no phandle link to the node */ if (!node || !node->phandle) - return FB_BLANK_UNBLANK; + return BACKLIGHT_POWER_ON; /* * If the driver is probed from the device tree and there is a @@ -434,7 +434,7 @@ static int pwm_backlight_initial_power_state(const struct pwm_bl_data *pb) * assume that another driver will enable the backlight at the * appropriate time. Therefore, if it is disabled, keep it so. */ - return active ? FB_BLANK_UNBLANK: FB_BLANK_POWERDOWN; + return active ? BACKLIGHT_POWER_ON : BACKLIGHT_POWER_OFF; } static int pwm_backlight_probe(struct platform_device *pdev) -- 2.45.2
