Re: [PATCH 5/7] drm/panel: add driver for samsung amb655x

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Mon, Jun 24, 2024 at 03:30:29AM GMT, Caleb Connolly wrote:
> This is a 1080x2400 120hz panel used on the OnePlus 8T. It uses DSC but
> uses non-standard DCS commands.

Please add a note regarding the panel using long packets for all the
commands.

Also the cover letter had a mention of the panel not fully comming up
after being reset, is that still true? If so, it should be mentioned in
the commit message too.

> Signed-off-by: Caleb Connolly <caleb@xxxxxxxxxxxxxxxx>
> ---
>  MAINTAINERS                                   |   7 +
>  drivers/gpu/drm/panel/Kconfig                 |   9 +
>  drivers/gpu/drm/panel/Makefile                |   1 +
>  drivers/gpu/drm/panel/panel-samsung-amb655x.c | 420 ++++++++++++++++++++++++++
>  4 files changed, 437 insertions(+)



> +static int samsung_amb655x_on(struct samsung_amb655x *amb655x)
> +{
> +	struct drm_dsc_picture_parameter_set pps;
> +	struct mipi_dsi_device *dsi = amb655x->dsi;
> +	struct mipi_dsi_multi_context ctx = { .dsi = dsi };
> +	struct device *dev = &dsi->dev;
> +	int ret;
> +
> +	dsi->mode_flags |= MIPI_DSI_MODE_LPM;
> +
> +	drm_dsc_pps_payload_pack(&pps, &amb655x->dsc);
> +
> +	mipi_dsi_dcs_write_long(&ctx, 0xf0, 0x5a, 0x5a);
> +	mipi_dsi_dcs_write_buffer_multi(&ctx, &pps, sizeof(pps));
> +	mipi_dsi_dcs_write_long(&ctx, 0x9d, 0x01);
> +	mipi_dsi_dcs_write_long(&ctx, 0xf0, 0xa5, 0xa5);
> +
> +	ret = mipi_dsi_dcs_exit_sleep_mode(dsi);

_multi. Shouldn't it be a long package too?

> +	if (ret < 0) {
> +		dev_err(dev, "Failed to exit sleep mode: %d\n", ret);
> +		return ret;
> +	}
> +	usleep_range(11000, 12000);

mipi_dsi_msleep() or add mipi_dsi_usleep_range().

> +	ret = mipi_dsi_dcs_set_column_address(dsi, 0x0000, 1080 - 1);

_multi, adding the function as required

> +	if (ret < 0) {
> +		dev_err(dev, "Failed to set column address: %d\n", ret);
> +		return ret;
> +	}
> +
> +	ret = mipi_dsi_dcs_set_page_address(dsi, 0x0000, 2400 - 1);

_multi

> +	if (ret < 0) {
> +		dev_err(dev, "Failed to set page address: %d\n", ret);
> +		return ret;
> +	}
> +
> +	/* FD Setting */
> +	mipi_dsi_dcs_write_long(&ctx, 0xf0, 0x5a, 0x5a);
> +	mipi_dsi_dcs_write_long(&ctx, 0xd5, 0x8d);
> +	mipi_dsi_dcs_write_long(&ctx, 0xb0, 0x0a);
> +	mipi_dsi_dcs_write_long(&ctx, 0xd5, 0x05);
> +	mipi_dsi_dcs_write_long(&ctx, 0xf0, 0xa5, 0xa5);
> +
> +	/* FFC Function */
> +	mipi_dsi_dcs_write_long(&ctx, 0xfc, 0x5a, 0x5a);
> +	mipi_dsi_dcs_write_long(&ctx, 0xb0, 0x01);
> +	mipi_dsi_dcs_write_long(&ctx, 0xe4, 0xa6, 0x75, 0xa3);
> +	mipi_dsi_dcs_write_long(&ctx, 0xe9,
> +			       0x11, 0x75, 0xa6, 0x75, 0xa3, 0x4b, 0x17, 0xac,
> +			       0x4b, 0x17, 0xac, 0x00, 0x19, 0x19);
> +	mipi_dsi_dcs_write_long(&ctx, 0xfc, 0xa5, 0xa5);
> +	msleep(61);

mipi_dsi_msleep

> +
> +	/* Dimming Setting */
> +	mipi_dsi_dcs_write_long(&ctx, 0xf0, 0x5a, 0x5a);
> +	mipi_dsi_dcs_write_long(&ctx, 0xb0, 0x06);
> +	mipi_dsi_dcs_write_long(&ctx, 0xb7, 0x01);
> +	mipi_dsi_dcs_write_long(&ctx, 0xb0, 0x05);
> +	mipi_dsi_dcs_write_long(&ctx, 0xb7, 0x13);
> +	mipi_dsi_dcs_write_long(&ctx, 0xb0, 0x01);
> +	mipi_dsi_dcs_write_long(&ctx, 0xb7, 0x4c);
> +	mipi_dsi_dcs_write_long(&ctx, 0xf0, 0xa5, 0xa5);
> +
> +	mipi_dsi_dcs_write_long(&ctx, MIPI_DCS_WRITE_CONTROL_DISPLAY, 0x20);
> +
> +	/* refresh rate Transition */
> +	mipi_dsi_dcs_write_long(&ctx, 0xf0, 0x5a, 0x5a);
> +	/* 60 Hz */
> +	//mipi_dsi_dcs_write_long(&ctx, 0x60, 0x00);
> +	/* 120 Hz */
> +	mipi_dsi_dcs_write_long(&ctx, 0x60, 0x10);
> +
> +	mipi_dsi_dcs_write_long(&ctx, 0xf0, 0xa5, 0xa5);
> +
> +	/* ACL Mode */
> +	mipi_dsi_dcs_write_long(&ctx, 0xf0, 0x5a, 0x5a);
> +	mipi_dsi_dcs_write_long(&ctx, MIPI_DCS_WRITE_POWER_SAVE, 0x00);
> +	mipi_dsi_dcs_write_long(&ctx, 0xf0, 0xa5, 0xa5);
> +	mipi_dsi_dcs_write_seq(dsi, MIPI_DCS_WRITE_CONTROL_DISPLAY, 0x20);

_multi

> +	msleep(110);

mipi_dsi_msleep()

> +
> +	/* Enable backlight */
> +	mipi_dsi_dcs_write_long(&ctx, 0x9F, 0x5A, 0x5A);
> +	mipi_dsi_dcs_set_display_on(dsi);

_multi

> +	mipi_dsi_dcs_write_seq(dsi, MIPI_DCS_ENTER_NORMAL_MODE);

_multi

> +	mipi_dsi_dcs_write_long(&ctx, 0x9F, 0xA5, 0xA5);
> +
> +	return ctx.accum_err;
> +}
> +
> +static int samsung_amb655x_off(struct samsung_amb655x *amb655x)
> +{
> +	struct mipi_dsi_device *dsi = amb655x->dsi;
> +	struct mipi_dsi_multi_context ctx = { .dsi = dsi };
> +	struct device *dev = &dsi->dev;
> +	int ret;
> +
> +	dsi->mode_flags |= MIPI_DSI_MODE_LPM;
> +
> +	mipi_dsi_dcs_write_long(&ctx, 0x9f, 0x5a, 0x5a);
> +
> +	ret = mipi_dsi_dcs_set_display_on(dsi);

_multi

> +	if (ret < 0) {
> +		dev_err(dev, "Failed to set display on: %d\n", ret);
> +		return ret;
> +	}
> +	msleep(20);

mipi_dsi_msleep

> +
> +	ret = mipi_dsi_dcs_set_display_off(dsi);

_multi

> +	if (ret < 0) {
> +		dev_err(dev, "Failed to set display off: %d\n", ret);
> +		return ret;
> +	}
> +	msleep(20);

mipi_dsi_msleep
> +
> +	ret = mipi_dsi_dcs_enter_sleep_mode(dsi);

_multi

> +	if (ret < 0) {
> +		dev_err(dev, "Failed to enter sleep mode: %d\n", ret);
> +		return ret;
> +	}
> +
> +	mipi_dsi_dcs_write_long(&ctx, 0x9f, 0xa5, 0xa5);
> +	msleep(150);
> +
> +	return ctx.accum_err;
> +}
> +

-- 
With best wishes
Dmitry



[Index of Archives]     [Linux DRI Users]     [Linux Intel Graphics]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux