The only information in the datasheet regarding this divider is a note
in SYS_PLLPARAM register documentation which states that when LSCLK is
270 MHz, LSCLK_DIV should be 1. What should LSCLK_DIV be set to when
LSCLK is 162 MHz (for DP 1.62G mode) is unclear, but empirical test
confirms using LSCLK_DIV 1 has no adverse effects either. In the worst
case, the internal TC358767 clock would run faster.
Signed-off-by: Marek Vasut <marex@xxxxxxx>
---
Cc: Andrzej Hajda <andrzej.hajda@xxxxxxxxx>
Cc: Daniel Vetter <daniel@xxxxxxxx>
Cc: David Airlie <airlied@xxxxxxxxx>
Cc: Jernej Skrabec <jernej.skrabec@xxxxxxxxx>
Cc: Jonas Karlman <jonas@xxxxxxxxx>
Cc: Laurent Pinchart <Laurent.pinchart@xxxxxxxxxxxxxxxx>
Cc: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
Cc: Maarten Lankhorst <maarten.lankhorst@xxxxxxxxxxxxxxx>
Cc: Maxime Ripard <mripard@xxxxxxxxxx>
Cc: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
Cc: Robert Foss <rfoss@xxxxxxxxxx>
Cc: Thomas Zimmermann <tzimmermann@xxxxxxx>
Cc: dri-devel@xxxxxxxxxxxxxxxxxxxxx
Cc: kernel@xxxxxxxxxxxxxxxxxx
---
V2: No change
V3: No change
---
drivers/gpu/drm/bridge/tc358767.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/bridge/tc358767.c b/drivers/gpu/drm/bridge/tc358767.c
index a48454fe2f634..743bf1334923d 100644
--- a/drivers/gpu/drm/bridge/tc358767.c
+++ b/drivers/gpu/drm/bridge/tc358767.c
@@ -738,7 +738,7 @@ static int tc_stream_clock_calc(struct tc_data *tc)
static int tc_set_syspllparam(struct tc_data *tc)
{
unsigned long rate;
- u32 pllparam = SYSCLK_SEL_LSCLK | LSCLK_DIV_2;
+ u32 pllparam = SYSCLK_SEL_LSCLK | LSCLK_DIV_1;
rate = clk_get_rate(tc->refclk);
switch (rate) {
--
2.43.0
