Add support for R-Car R8A779H0 V4M which has similar characteristics as the already supported R-Car V4H R8A779G0, but with a single output channel. Signed-off-by: Jacopo Mondi <jacopo.mondi@xxxxxxxxxxxxxxxx> --- BSP patch https://github.com/renesas-rcar/linux-bsp/commit/f2fc3314dab2052240653c1a31ba3d7c7190038e --- --- .../bindings/display/renesas,du.yaml | 1 + drivers/gpu/drm/renesas/rcar-du/rcar_du_drv.c | 18 ++++++++++++++++++ .../gpu/drm/renesas/rcar-du/rcar_du_group.c | 17 ++++++++++++----- 3 files changed, 31 insertions(+), 5 deletions(-) diff --git a/Documentation/devicetree/bindings/display/renesas,du.yaml b/Documentation/devicetree/bindings/display/renesas,du.yaml index c5b9e6812bce..d369953f16f7 100644 --- a/Documentation/devicetree/bindings/display/renesas,du.yaml +++ b/Documentation/devicetree/bindings/display/renesas,du.yaml @@ -41,6 +41,7 @@ properties: - renesas,du-r8a77995 # for R-Car D3 compatible DU - renesas,du-r8a779a0 # for R-Car V3U compatible DU - renesas,du-r8a779g0 # for R-Car V4H compatible DU + - renesas,du-r8a779h0 # for R-Car V4M compatible DU reg: maxItems: 1 diff --git a/drivers/gpu/drm/renesas/rcar-du/rcar_du_drv.c b/drivers/gpu/drm/renesas/rcar-du/rcar_du_drv.c index dee530e4c8b2..a1d174b0b00b 100644 --- a/drivers/gpu/drm/renesas/rcar-du/rcar_du_drv.c +++ b/drivers/gpu/drm/renesas/rcar-du/rcar_du_drv.c @@ -545,6 +545,23 @@ static const struct rcar_du_device_info rcar_du_r8a779g0_info = { .dsi_clk_mask = BIT(1) | BIT(0), }; +static const struct rcar_du_device_info rcar_du_r8a779h0_info = { + .gen = 4, + .features = RCAR_DU_FEATURE_CRTC_IRQ + | RCAR_DU_FEATURE_VSP1_SOURCE + | RCAR_DU_FEATURE_NO_BLENDING, + .channels_mask = BIT(0), + .routes = { + /* R8A779H0 has a single MIPI DSI output. */ + [RCAR_DU_OUTPUT_DSI0] = { + .possible_crtcs = BIT(0), + .port = 0, + }, + }, + .num_rpf = 5, + .dsi_clk_mask = BIT(0), +}; + static const struct of_device_id rcar_du_of_table[] = { { .compatible = "renesas,du-r8a7742", .data = &rcar_du_r8a7790_info }, { .compatible = "renesas,du-r8a7743", .data = &rzg1_du_r8a7743_info }, @@ -571,6 +588,7 @@ static const struct of_device_id rcar_du_of_table[] = { { .compatible = "renesas,du-r8a77995", .data = &rcar_du_r8a7799x_info }, { .compatible = "renesas,du-r8a779a0", .data = &rcar_du_r8a779a0_info }, { .compatible = "renesas,du-r8a779g0", .data = &rcar_du_r8a779g0_info }, + { .compatible = "renesas,du-r8a779h0", .data = &rcar_du_r8a779h0_info }, { } }; diff --git a/drivers/gpu/drm/renesas/rcar-du/rcar_du_group.c b/drivers/gpu/drm/renesas/rcar-du/rcar_du_group.c index 2ccd2581f544..361e1d01b817 100644 --- a/drivers/gpu/drm/renesas/rcar-du/rcar_du_group.c +++ b/drivers/gpu/drm/renesas/rcar-du/rcar_du_group.c @@ -111,6 +111,8 @@ static void rcar_du_group_setup_didsr(struct rcar_du_group *rgrp) /* * On Gen3 dot clocks are setup through per-group registers, * only available when the group has two channels. + * + * R-Car V4M (R8A779H0) has only one channel, index is == 0. */ rcrtc = &rcdu->crtcs[rgrp->index * 2]; num_crtcs = rgrp->num_crtcs; @@ -185,11 +187,16 @@ static void rcar_du_group_setup(struct rcar_du_group *rgrp) dorcr |= DORCR_PG1T | DORCR_DK1S | DORCR_PG1D_DS1; rcar_du_group_write(rgrp, DORCR, dorcr); - /* Apply planes to CRTCs association. */ - mutex_lock(&rgrp->lock); - rcar_du_group_write(rgrp, DPTSR, (rgrp->dptsr_planes << 16) | - rgrp->dptsr_planes); - mutex_unlock(&rgrp->lock); + /* + * Apply planes to CRTCs association, skip for V4M which has a single + * channel. + */ + if (rcdu->info->gen < 4 || rgrp->num_crtcs > 1) { + mutex_lock(&rgrp->lock); + rcar_du_group_write(rgrp, DPTSR, (rgrp->dptsr_planes << 16) | + rgrp->dptsr_planes); + mutex_unlock(&rgrp->lock); + } } /* -- 2.45.2
